用于光纤F-P声压传感器的直流补偿解调技术研究

提出了一种改进的双腔直流补偿技术，用于解调非本征法布里-珀罗干涉(EFPI)光纤传感器，以消除腔长差与入射光波长相匹配的要求。通过消除直流分量和校准信号相位，可以从具有任意相位差的原始信号中获 得两路正交信号。通过理论仿真，制作了具有不同腔长差的EFPI光纤传感器，对所提出的方法进行了试验验证。 结果表明，该方法在解调双 F P腔 EFPI传感器时，不需要保证初始相位差恒定，且对腔长漂移不敏感，具有良好的 稳定性和实用价值。     

Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

基于背景扣除的弱吸收信息精确提取方法研究

随着半导体器件的快速发展，基于分子振-转吸收光谱的研究日益深入，以可调谐半导体激光吸收光谱（Tunable Diode Laser Absorption Spectroscopy， TDLAS）为代表的检测技术取得巨大进步，应用领域进一步扩大，已有超过一千类仪器应用于连续监测以及过程控制，每年出售的气体检测仪器占据了红外气体传感检测仪器总数的5%以上，已实现不同领域组分浓度、温度、压力等参数的高精度探测。本文针对仪器开发领域目标吸收信息被完全覆盖的复杂应用环境，利用调制技术将吸收信息转移到高频部分，经过分通道背景扣除和谐波信号归一化处理提取吸收信息。以测量含硫天然气中微量H₂S为例，天然气中CH₄含量超过90%，目标组分H₂S的吸收信息被完全覆盖，将吸收信息转移到1 kHz频率，得到的谐波信号峰值与H₂S浓度呈正相关，线性参数达到0.999 9，实现了弱吸收信号的有效提取，从方法上验证了提取弱吸收信号的有效性，进一步扩展了光学气体传感的应用领域，为仪器开发提供技术保障。     

Multi-scale simulation model of air system based on cross-dimensional data transmission method

The Secondary Air System (SAS) plays an important role in the safe operation and performance of aeroengines. The traditional 1D-3D coupling method loses information when used for secondary air systems, which affects the calculation accuracy. In this paper, a Cross-dimensional Data Transmission method (CDT) from 3D to 1D is proposed by introducing flow field uniformity into the data transmission. First, a uniformity index was established to quantify the flow field parameter distribution characteristics, and a uniformity index prediction model based on the locally weighted regression method (Lowess) was established to quickly obtain the flow field information. Then, an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation, and the calculation method was automatically determined according to the established criterion. Finally, a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution, which are then used to modify the selected parameters at the 1D-3D interface. Taking a typical disk cavity air system as an example, the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88% compared with the traditional 1D-3D coupling method. Furthermore, the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.     

Compact wideband FSS-absorber-based low-RCS reflectarray antenna

This paper presents a method to realize compact broadband low-RCS Reflect Array(RA) antenna based on a Frequency Selective Surface(FSS) absorber and a reflective metasurface.Such an FSS absorber consists of a resistance-loaded lossy layer and an FSS layer, which is utilized to reach an absorption-transmission response. The bottom reflective metasurface works as a phase array, reshaping the quasi-sphere wave from the feeding antenna into the quasi-plane wave. As a demonstration, the low-RCS RA an...