弧齿锥齿轮啮合迹方向角的主动设计方法

为了实现弧齿锥齿轮设计规定的啮合迹方向,以局部综合法为基础,结合轮齿接触分析技术和无约束优化方法,进行弧齿锥齿轮啮合迹方向角的主动设计,给出了1种实现齿面参考点处啮合迹目标方向角的设计方法。通过1对弧齿锥齿轮的实例演示,论证了该方法对弧齿锥齿轮啮合迹方向角进行主动设计的可行性。结果表明:局部综合法中的输入啮合迹方向角必须小于旋转轴平面中规定的角度;在调整啮合迹方向角的过程中,传动误差曲线没有发生畸变。     

典型CMOS存储器电离辐照效应

对电离辐照环境中典型CMOS存储器的辐照效应进行了研究。分析了SRAM,EEPROM,FLASH ROM存储器在^60Coγ射线辐照及辐照后不同退火过程中,CMOS存储器的集成度、辐照偏置、退火时间和温度与电离辐照效应的关系。结果发现：不加电（冷备份）状态的^60Coγ射线辐照过程中,存储器的逻辑状态翻转出现较正常工作状态推迟1个量级以上;随着集成度的提高,SRAM,EEPROM存储器的辐照敏感度降低;试验器件经不同剂量的^60Coγ射线辐照后在不同温度下退火,所有试验器件均出现了逻辑状态翻转。     

An Investigation into Vertical Bias Effects

ABSTRACT

In three experiments, after exploring a virtual environment (VE), adult participants made spatial judgments about the location of target objects that were higher and lower than their perceived test location within the VE. In Experiment 1, the locations of the target objects were inferred from verbal instructions. The main results were a tendency to judge objects as closer to the horizontal plane than their true locations, and more efficient downward than upward judgments. Both effects generally accord with findings reported by Wilson et al. (2004a Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004a. Memory for targets in a multilevel simulated environment: Evidence for vertical asymmetry in spatial memory. Memory & Cognition, 32: 283–297. [Crossref] , [Google Scholar], 2004b Wilson, P. N., Foreman, N., Stanton, D. and Duffy, H. 2004b. Memory for targets in a multi-level simulated-environment: A comparison between able-bodied and physically disabled children. British Journal of Psychology, 95: 325–338.  [Google Scholar]). In Experiments 2 and 3, which were closely modeled on the design of the Wilson et al. studies, regression to the horizontal plane was noted but no downward bias was observed. A misperception in the viewing height between the floors and ceilings of the virtual rooms was apparent in both experiments. The results from the present study together with earlier investigations suggest different hierarchical encoding of between-axis and within-axis information.     

基于一致关联数最大化的航迹关联算法

航迹关联(TTTA)是多传感器数据融合系统的核心模块之一,是系统误差估计和航迹融合的前提和基础。传感器存在的固有系统误差使得目标位置状态估计与真值发生偏离,容易诱发TTTA错误。传统的基于全局最小距离准则的TTTA算法,需要获得较高精度的系统误差估计,来对航迹数据进行误差补偿。针对传感器具有系统误差环境下的TTTA问题,在对TTTA进行间接评估的基础上,定义了一致关联数的概念,提出了一致关联数最大化的TTTA准则,并在稳健交替迭代的框架下完成算法设计。与距离函数不同,一致关联数是一个离散量,放松了对系统误差估计精度的要求。最后,仿真实验验证了所提算法的有效性。     

A closed-form solution for moving source localization using LBI changing rate of phase difference only

Due to the deficiencies in the conventional multiple-receiver localization systems based on direction of arrival(DOA) such as system complexity of interferometer or array and amplitude/phase unbalance between multiple receiving channels and constraint on antenna configuration,a new radiated source localization method using the changing rate of phase difference(CRPD)measured by a long baseline interferometer(LBI) only is studied. To solve the strictly nonlinear problem, a two-stage closed-form solution is proposed. In the first stage, the DOA and its changing rate are estimated from the CRPD of each observer by the pseudolinear least square(PLS) method,and then in the second stage, the source position and velocity are found by another PLS minimization. The bias of the algorithm caused by the correlation between the measurement matrix and the noise in the second stage is analyzed. To reduce this bias, an instrumental variable(IV) method is derived. A weighted IV estimator is given in order to reduce the estimation variance. The proposed method does not need any initial guess and the computation is small. The Cramer–Rao lower bound(CRLB) and mean square error(MSE) are also analyzed. Simulation results show that the proposed method can be close to the CRLB with moderate Gaussian measurement noise.     

Categorical Bias in Line Angle Judgments: Sex Differences and the Use of Multiple Categories

According to the Category Adjustment (CA) model, spatial estimates (e.g., of location) involve Bayesian combination across multiple, hierarchical pieces information, each weighted by its relative certainty. Recent work, though, has shown that men and women differ in terms of their certainty regarding fine-grained and categorical information in location memory. Here we demonstrate that this reflects a more general sex difference in visuospatial processing by examining bias patterns in a line angle judgment task (JLAP-15). In addition, the data suggest that multiple, hierarchical levels of categorical information influenced spatial judgments. These results imply that the hierarchical combination outlined by the CA model extends beyond two levels, and that men and women apply differential weighting to these representations.     

406～920nm的绝对光谱响应高准确度标度

描述美国国家标准与技术研究院所建立的４０６￣９２０ｎｍ绝对光谱响应标度，该标度完全是建立在探测器测量基础上的，并可溯源到ＮＩＳＴ高准确度低温辐射计。硅光电二极管光吸收探测器被用来将光功率测量由ＨＡＣＲ传递到进行日常校准的单色仪装置。传递也包括建立硅光电二极管光吸收探测器的量子效率模型，最后给出了这些测量为基础的ＮＩＳＴ现有能力的简单介绍。     

A systematic spatial bias in remembering eye positions

Categorical bias in location memory in geometric spaces is well established. The present study assessed the presence of the bias in locating eyes in images of human faces. Participants were presented with digital faces and indicated the position of one of the eyes in both upright and inverted orientations. Biases resulted from participants using multiple sources of accessible information. No differences were found for upright vs. inverted face images. Overall, the data were consistent with the retrieval category adjustment model. These distortions may be considered within the forensic context, when eyewitnesses work with a sketch artist or use a computer program to generate an image of the culprit.     

Evaluation of SARAL/AltiKa performance using GNSS/IMU equipped buoy in Sajafi,Imam Hassan and Kangan Ports

Performance of SARAL/AltiKa mission has been evaluated within 2016 altimeter calibration/validation framework in Persian Gulf through three campaigns conducted in the offshore waters of Sajafi, Imam Hassan and Kangan Ports, while the altimeter overflew the passes 470, 111 and 25 on 13 Feb, 7 March and 17 June 2016, respectively. As the preparation, a lightweight buoy was equipped with a GNSS receiver/choke-ring antenna and a MEMS-based IMU to measure independent datasets in the field operations. To obtain accurate sea surface height (SSH) time series, the offset of the onboard antenna from the equilibrium sea level was predetermined through surveying operations as the buoy was deploying in the onshore waters of Kangan Port. Accordingly, the double-difference carrier phase observations have been processed via the Bernese GPS Software v. 5.0 so as to provide the GNSS-derived time series at the comparison points of the calibration campaigns, once the disturbing effects due to the platform tilt and heave have been eliminated. Owing to comparing of the SSH time series and the associating altimetry 1?Hz GDR-T datasets, the calibration/validation of the SARAL/AltiKa has been performed in the both cases of radiometer and ECMWF wet troposphere corrections so as to identify potential land contamination. An agreement of the present findings in comparison with those attained in other international calibrations sites confirms the promising feasibility of Persian Gulf as a new dedicated site for calibration/validation of ongoing and future altimetry missions.     

高压脉冲电子束的控制及其对焊缝形貌影响

研制出一台150 kV/30 kW高压脉冲电子束焊机,介绍了控制脉冲束流产生的偏压脉冲电源拓扑电路结构及脉冲束流频率、占空比、束流基值、束流峰值的调节控制技术.在0~1 kHz频率范围内,该电源可输出最大幅值200 mA的脉冲电子束束流,且工艺参数调节方便.分别采用脉冲束流与连续束流电子束工艺焊接了1Cr18Ni9Ti奥氏体不锈钢,对不同工艺的焊缝形貌进行了对比分析.与连续束流电子束焊接工艺相比,采用脉冲电子束焊接工艺的焊缝熔深增加,深宽比增大;对于脉冲电子束焊接工艺,占空比给定时,随着束流频率增加,焊接缺陷减少.试验结果表明:脉冲束流频率、占空比是影响焊缝成形的关键工艺参数;脉冲调制方式控制偏压是获得高压脉冲电子束的理想控制技术之一.