Comparison of Landsat OLI,ASTER, and Sentinel 2A data in lithological mapping : A Case study of Rich area (Central High Atlas,Morocco)

The eastern part of the Rich area consists of the massive Paleozoic and Meso-Cenozoic cover formations that present the geodynamic development of the study area, where is characterized by various carbonate facies of Jurassic age. The geographical characteristic of the study area leaves the zone difficult to map by conventional methods. The objective of this work focuses on the mapping of the constituent lithological units of the study area using multispectral data of Landsat OLI, ASTER, and Sentinel 2A MSI. The processing of these data is based on a precise methodology that distinguishs and highlights the limits of the different lithological units that have an approximate similarity of spectral signature. Three techniques were used to enhance the image including Principal Component Analysis (PCA), Minimum Noise Fraction (MNF), and Independent Component Analysis (ICA). Lithological mapping was performed using two types of supervised classification : Maximum likelihood classifier (MLC) and Support Vector Machine (SVM).The results of processing data show the effectiveness of Sentinel 2A data in mapping of lithological units than the ASTER and Landsat OLI data. The classification evaluation of two methods of the Sentinel 2A MSI image showed that the SVM method give a better classification with an overall accuracy of 93,93% and a Kappa coefficient of 0.93, while the MLC method present an overall accuracy of 82,86% and a Kappa coefficient of 0.80. The results of mapping obtained show a good correlation with the geological map of the study area as well as the efficiency of remote sensing in identification of different lithological units in the Central High Atlas.     

Prediction of landslides using ASTER imagery and data mining models

The aim of this study was to identify landslide-related factors using only remotely sensed data and to present landslide susceptibility maps using a geographic information system, data-mining models, an artificial neural network (ANN), and an adaptive neuro-fuzzy interface system (ANFIS). Landslide-related factors were identified in Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) satellite imagery. The slope, aspect, and curvature of topographic features were calculated from a digital elevation model that was made using the ASTER imagery. Lineaments, land-cover, and normalized difference vegetative index layers were also extracted from the imagery. Landslide-susceptible areas were analyzed and mapped based on occurrence factors using the ANN and ANFIS. The generalized bell-shaped built-in membership function of the ANFIS was applied to landslide susceptibility mapping. Analytical results were validated using landslide test location data. In the validation results, the ANN model showed 80.42% prediction accuracy and the ANFIS model showed 86.55% prediction accuracy. These results suggest that the ANFIS model has a better performance than does the ANN in predicting landslide susceptibility.     

ASTER spectral sensitivity of carbonate rocks – Study in Sultanate of Oman

Remote sensing satellite data plays a vital role and capable in detecting minerals and discriminating rock types for explorations of mineral resources and geological studies. Study of spectral absorption characters of remotely sensed data are under consideration by the exploration and mining companies, and demonstrating the spectral absorption characters of carbonates on the cost-effective multispectral image (rather than the hyperspectral, Lidar image) for easy understanding of all geologists and exploration communities of carbonates is very much important. The present work is an integrated study and an outcome of recently published works on the economic important carbonate rocks, includes limestone, marl, listwaenites and carbonatites occurred in parts of the Sultanate of Oman. It demonstrates the spectral sensitivity of such rocks for simple interpretation over satellite data and describes and distinguishes them based on the absorptions of carbonate minerals in the spectral bands of advanced spaceborne thermal emission and reflection radiometer (ASTER) for mapping and exploration studies. The study results that the ASTER spectral band 8 discriminates the carbonate rocks due to the presence of predominantly occurred carbonate minerals; the ASTER band 5 distinguishes the limestones and marls (more hydroxyl clay minerals) from listwaenite (hydrothermally altered rock) due to the presence of altered minerals and the ASTER band 4 detects carbonatites (ultramafic intrusive alkaline rocks) which contain relatively more silicates. The study on the intensity of the total absorptions against the reflections of these rocks shows that the limestones and marls have low intensity in absorptions (and high reflection values) due to the presence of carbonate minerals (calcite and dolomite) occurred in different proportions. The listwaenites and carbonatites have high intensity of absorptions (low reflection values) due to the occurrence of Mn-oxide in listwaenites and carbonates in carbonatites apart the influence of major carbonate minerals that occurred predominantly in these rocks. The study of ASTER thermal infrared (TIR) spectral bands distinguished the marls have low emissivity of energy due to the presence of hydroxyl bearing alumina-silicate minerals from the other rocks such as limestones, listwaenites and carbonatites which have high emissivity due to the absence of hydroxyl bearing alumina-silicate minerals and the presence of carbonate minerals and carbonates.     

Built-up land mapping capabilities of the ASTER and Landsat ETM+ sensors in coastal areas of southeastern China

Worldwide urbanization has accelerated expansion of urban built-up lands and resulted in substantial negative impacts on the global environments. Precisely measuring the urban sprawl is becoming an increasing need. Among the satellite-based earth observation systems, the Landsat and ASTER data are most suitable for mesoscale measurements of urban changes. Nevertheless, to date the difference in the capability of mapping built-up land between the two sensors is not clear. Therefore, this study compared the performances of the Landsat-7 ETM+ and ASTER sensors for built-up land mapping in the coastal areas of southeastern China. The comparison was implemented on three date-coincident image pairs and achieved by using three approaches, including per-band-based, index-based, and classification-based comparisons. The index used is the Index-based Built-up Index (IBI), while the classification algorithm employed is the Support Vector Machine (SVM). Results show that in the study areas, ETM+ and ASTER have an overall similar performance in built-up land mapping but also differ in several aspects. The IBI values determined from ASTER were consistently higher than from ETM+ by up to 45.54% according to percentage difference. The ASTER also estimates more built-up land area than ETM+ by 5.9–6.3% estimated with the IBI-based approach or 3.9–6.1% with the SVM classification. The differences in the spectral response functions and spatial resolution between relative spectral bands of the two sensors are attributed to these different performances.     

Encounter trajectories for deep space mission ASTER to the triple near Earth asteroid 2001-SN263. The laser altimeter (ALR) point of view

In cooperation with Russia, the Brazilian deep space mission ASTER plans to send a small spacecraft to investigate the triple asteroid 2001-SN263. The nearest launch opportunities for this project include June 2022 and June 2025. One main exploration campaign is being planned with focus on the largest asteroid (Alpha). Among the instruments under development, a laser altimeter (named ALR) was preliminarily designed and presented in 2010–2011. Many studies to define mission and instruments requirements were performed aiming at the characterization of important issues for the successful realization of the mission. Among them, the identification of a suitable trajectory that could be followed by the ASTER spacecraft in the encounter phase, when the main campaign will take place. This paper describes the effort undertaken with focus on the laser altimeter operation. Possible encounter trajectories were modelled and simulated to identify suitable approach parameters and conditions allowing the accomplishment of the intended investigation. The simulation also involves the instrument operation, considering approach geometry, attitude, relative motion, time/date, and the dynamics of the main asteroid. From the laser altimeter point of view, keeping in mind the desired coverage results (50% minimum surface coverage of asteroid Alpha, complying with horizontal and vertical resolution requirements), results point out crucial features for the encounter trajectory, like the need for a small inclination (10^-6 degrees; with respect to the asteroid's orbit), the most favourable spacecraft positioning (between the Sun and the asteroid) and pointing condition (back to the Sun), the minimum amount of achievable surface coverage (58%, focused on central areas), and the most proper time to conduct the main campaign (January 2025). Concerning the instrument, results offer refined values for divergence angle (500 to 650 μrad, half-cone), pulse repetition frequencies (from 1/20 to 1 Hz), and consequent data generation rates. A simulation tool that can use any 3D generated trajectories as input data was created for the analyses presented here. Although created for the ALR in this mission, this simple analysis tool can be adapted to other instruments in this or other missions.     

Mapping hydrothermal alteration zones and lineaments associated with orogenic gold mineralization using ASTER data: A case study from the Sanandaj-Sirjan Zone,Iran

The Sanandaj-Sirjan Zone (SSZ) is considered as an important region for gold exploration in the western sector of Iran. Its mountainous topography and unpaved routes make its study challenging for researchers and raise the costs for mining companies strating new exploration plans. Gold mineralization mainly occurs as irregular to lenticular sulfide-bearing quartz veins along shear zones in deformed mafic to intermediate metavolcanic and metasedimentary rocks. In this investigation, ASTER data are used for mapping hydrothermal alteration minerals and to better discriminate geological structural features associated with orogenic gold occurrences in the area. Image transformation techniques such as specialized band ratioing and Principal Component Analysis are used to delineate lithological units and alteration minerals. Supervised classification techniques, namely Spectral Angle Mapper (SAM) and Spectral Information Divergence (SID) are applied to detect subtle differences between indicator alteration minerals associated with ground-truth gold locations in the area. The directional filtering technique is applied to help in tracing along the strike the different linear structures. Results demonstrate that the integration of image transformation techniques and supervised classification of ASTER data with fieldwork and geochemical exploration studies has a great efficiency in targeting new prospects of gold mineralization in the SSZ. The approach used in this research provides a fast, cost-efficient means to start a comprehensive geological and geochemical exploration programs in the study area and elsewhere in similar regions.     

A generalised methodology for estimating land surface temperature for non-urban areas of Greece through the combined use of NOAA–AVHRR data and ancillary information

The purpose of this study was twofold: to develop a methodology for the estimation of land surface temperature for non-urban areas and to analyze the sensitivity of the methodology. The key element of the methodology was the development of emissivity maps based on CORINE Land Cover and the ASTER spectral library. Land surface temperatures were derived from NOAA/AVHRR data and the methodology was applied at a national scale in Greece, with emphasis given to non-urban areas. A sensitivity analysis was performed in order to determine the variables that mainly affect the estimation of land surface temperature. A varying propagation error was identified depending on the temperature and humidity of the atmosphere, as well as the land cover type. The methodology was applied to a series of 25 AVHRR images and the results were compared to in-situ measurements from representative stations.     

Extraction of hydrothermal alterations from ASTER SWIR data from east Zanjan,northern Iran

The use of satellite images for mineral exploration has been very successful in pointing out the presence of minerals such as smectite and kaolinite which are important in the identification of hydrothermal alterations. Shortwave infrared (SWIR) bands from Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) with the wavelength of ASTER SWIR bands between 1.65 and 2.43 μm has a good potential for mapping a hydrothermal alteration minerals such as alunite, pyrophyllite, kaolinite, illite–muscovite–sericite, and carbonate. In this range, hydroxide minerals which have been produced by hydrothermal alteration exhibit good absorption compared to shorter or longer wavelengths. In this research which aims to remove atmospheric and topographic effects from ASTER SWIR data, the authors used the log-residual method (LRM) with the minimum noise fraction (MNF) transformation to create a pixel purity index (PPI) which was used to extract the most spectrally pure pixels from multispectral images. Spectral analyses of the clay mineralogy of the study area (east Zanjan, in northern Iran) were obtained by matching the unknown spectra of the purest pixels to the U.S. Geological Survey (USGS) mineral library. Three methods, spectral feature fitting (SFF), spectral angle mapping (SAM), and binary encoding (BE) were used to generate a score between 0 and 1, where a value of 1 indicates a perfect match showing the exact mineral type. In this way, it was possible to identify certain mineral classes, including chlorite, carbonate, calcite–dolomite–magnesite, kaolinite–smectite, alunite, and illite. In this research, two main propylitic and phyllic–argillic zones could be separated using their compositions of these minerals. These two alteration zones are important for porphyry copper deposits and gold mineralization in this part of Iran.