基于热流密度仿真计算的曲面红外灯阵优化设计方法

文章主要针对形状复杂的月球探测器的热流模拟问题进行研究。基于遗传算法与复合形算法,采取双目标、变尺度网格的优化策略建立了红外灯阵热流优化设计方法。应用单灯热流分布计算模型生成单灯热流分布数据库,解决了反光板反射热流问题,在此基础上建立了红外灯阵热流分布仿真计算方法。结果表明热流分布仿真计算具有较高的准确度,速度快,能够满足优化设计的需要,可以有效提高热流分布均匀性。     

运用区域法模型计算燃烧室内一维辐射换热

采用一种机理严密,精度高的区域法辐射换热模型用于燃烧室壁温计算.采用Lefebvre模型和区域法模型计算了一个圆筒型不冷却火焰筒结构的换热;对比分析了两种方法计算的壁面辐射热流密度和壁面温度分布情况.结果表明,使用Lefebvre模型计算时,由于将燃气按一维划分为定向辐射,在燃烧室前后壁面辐射热流密度较小,存在一定不足;而使用区域法模型计算时,辐射热流密度分布更趋合理.      

某探测器上火箭发动机热防护仿真与设计

根据某探测器的具体结构及工作条件,分析和计算探测器上火箭发动机的热环境参数.利用有限元法计算火箭发动机固壁辐射热流密度,依据热流边界条件设计热防护方案;利用有效发射率表征多层隔热材料隔热性能并进行温度场数值仿真.由于多层隔热材料性能参数的不易确定性,计算了参数在较大范围内的热防护效果.通过仿真计算验证热防护方案的有效性和可靠性,并分析影响热防护效果的主要因素;计算结果表明多层隔热材料的有效发射率是影响隔热性能最重要的因素,比热容、表面发射率、密度对热防护性能影响很小.      

Height of shock formation in the solar corona inferred from observations of type II radio bursts and coronal mass ejections

Employing coronagraphic and EUV observations close to the solar surface made by the Solar Terrestrial Relations Observatory (STEREO) mission, we determined the heliocentric distance of coronal mass ejections (CMEs) at the starting time of associated metric type II bursts. We used the wave diameter and leading edge methods and measured the CME heights for a set of 32 metric type II bursts from solar cycle 24. We minimized the projection effects by making the measurements from a view that is roughly orthogonal to the direction of the ejection. We also chose image frames close to the onset times of the type II bursts, so no extrapolation was necessary. We found that the CMEs were located in the heliocentric distance range from 1.20 to 1.93 solar radii (Rs), with mean and median values of 1.43 and 1.38 Rs, respectively. We conclusively find that the shock formation can occur at heights substantially below 1.5 Rs. In a few cases, the CME height at type II onset was close to 2 Rs. In these cases, the starting frequency of the type II bursts was very low, in the range 25–40 MHz, which confirms that the shock can also form at larger heights. The starting frequencies of metric type II bursts have a weak correlation with the measured CME/shock heights and are consistent with the rapid decline of density with height in the inner corona.     

均匀化处理对7A55铝合金组织与性能的影响

研究了单级均匀化和双级均匀化工艺对铸态7A55铝合金组织和性能的影响规律.结果表明,经450℃单级均匀化处理后,合金中的残留共晶仍然较多,保温60h时合金中残留共晶比例由铸态合金的15.2%减少至7.2%,合金硬度由72HRB降低至60HRB,伸长率则由2.1%增大至11.2%;经450℃/60h+470℃双级均匀化处...     

认知协作Ad Hoc网络中分布路由跨层控制策略

认知无线电Ad Hoc网络中,吞吐量最大化是一个关键的挑战.为了实现这一目标,协同传输是前景看好的技术,利用在每个空间节点的多样性中继链路以增加性能,特别是在无线环境中由于不同的信道质量、有限的能源和带宽资源,这种想法是有吸引力的.文章在分布式动态环境下,研究了联合动态路由.中继分配和频谱分配分布式和本地算法,提出了一...     

基于FSK的测斜系统电路设计

本文重点阐述了测斜系统井下仪器数据采集单元和数据发送单元电路的设计及井上仪器解调电路的设计，给出了具体的电路设计结果及元器件参数。     

Clipper“快船”概念气动特性初探

设计新型高效低廉的运输工具,把有效载荷送入近地轨道是人们不断追求的目标.已成功实现载人天地往返的运输工具包括研制周期长、造价昂贵的可重复使用航天飞机和结构简单、一次性使用的载人飞船两类.为进一步降低发射成本,设计介于航天飞船和航天飞机之间的新型飞行器,集飞船和航天飞机特点于一体的升力再入飞船返回舱也许更为切实可行.俄罗斯联邦空问局提出的可多次使用"快船"概念值得关注,其升阻比高、机动性强、稳定性好、过载低、空间大、成本低,而且可以部分重复使用,代表了未来低成本天地往返运输系统的重要发展方向.     

认知无线网络及其频谱管理技术

认知无线网络通过不同种类的无线网络体系结构之间的并存和动态频谱接入技术可以为移动用户提供高带宽的服务。高效的频谱管理技术是这一新型网络面临的主要挑战之一。为了更好的理解认知无线网络,文章简单回顾了认知无线电技术,对认知无线网络的结构及特点进行了深入研究,明确了认知无线网络频谱管理的主要任务,并结合认知无线电当前的发展状况对认知无线网络频谱管理技术进行了总结分析。     

Asymmetric precipitation in a coronal loop as explanation of a singular observed spectrum

Almost 10 years of solar submillimeter observations have shown new aspects of solar activity, such as the presence of rapid solar spikes associated with the launch of coronal mass ejections and an increasing submillimeter spectral component in flares. We analyse the singular microwave–submillimeter spectrum of an M class solar flare on 20 December, 2002. Flux density observations measured by Sun patrol telescopes and the Solar Submillimeter Telescope are used to build the radio spectrum, which is fitted using Ramaty’s code. At submillimeter frequencies the spectrum shows a component different from the microwave classical burst. The fitting is achieved proposing two homogeneous sources of emission. This theoretical fitting is in agreement with differential precipitation through a magnetically asymmetric loop or set of loops. From a coronal magnetic field model we infer an asymmetric magnetic structure at the flare location. The model proposed to quantify the differential precipitation rates due to the asymmetry results in a total precipitation ratio Q₂/Q₁≈10⁴–10⁵, where Q₁(Q₂) represents the total precipitation in the loop foot with the high (low) magnetic field intensity. This ratio agrees with the electron total number ratio of the two sources proposed to fit the radio spectrum.