2D-Cf/SiC复合材料及构件的无压成型工艺

采用无压成型工艺制备了2D-Cf/SiC及复杂构件。结果表明:复合材料弯曲强度达到328MPa,断裂韧度达到14.9MPa·m1/2,层间剪切强度达到35.9MPa,同时材料也具有很好的高温抗氧化性能。利用本工艺制备了某型号发动机的尾喷管,并成功通过了应用部门的试车考核。     

模拟沿海大气环境腐蚀对2A12-T4 铝合金板件疲劳行为的影响

对航空材料服役的大气环境开展实验室加速模拟试验以获得其长期腐蚀行为和寿命退化情况是相关材料和装备设计、制造、维修以及寿命评定和寿命控制的重要内容和基础。通过开展针对2A12-T4 铝合金板件的模拟铝合金沿海大气腐蚀的实验室加速腐蚀试验，模拟研究从初期点蚀到后期剥蚀的整个沿海大气腐蚀过程中，腐蚀对铝合金板件疲劳特性的影响；基于疲劳寿命退化相当的原则，建立2A12-T4 铝合金板件加速腐蚀与大气腐蚀之间的加速等效关系。结果表明：2A12-T4 铝合金实验室加速预腐蚀后疲劳寿命退化规律与大气预腐蚀疲劳寿命退化规律一致，均呈现为“快速下降期”+“平台期”的特征。     

00Cr17Ni14Mo2不锈钢的性能研究

本文研究了00C r17N i14Mo2不锈钢材料的的性能,证明其具有很好的机械性能、焊接性能和耐腐蚀性能,从用户和研究开发的角度探讨了其在压力容器、化工装置等领域的应用。     

基于NDIS的Anti-Xprobe2实现技术研究

Xprobe2通过模糊矩阵统计分析主动探测数据报对应的ICMP数据报特征,进而探测得到远端操作系统的类型.在分析Xprobe2实现机制的基础上,通过对探测数据报进行检测,并以指定的操作系统特征为模板,对输出ICMP数据报进行伪装,实现防御Xprobe2探测.基于NDIS给出了实现的体系机构,并对事件分离模块和伪装应答模块进行了详细的讨论.测试结果显示,该方案能有效的防御Xprobe2主动探测,实现了对操作系统指纹的伪装.     

P2P模式的系统结构研究

本文首先介绍了什么是P2P和它的基本运作模式。详细阐述P2P模式的主要形式及其相应的系统结构。     

以天然石墨为原料制备高性能材料的研究

以天然石墨为原料，进行多组元掺杂制备了SiC-B4C-ZrC/C复合材料。研究了ZrO2的加入量对材料性能的影响。实验结果表明：加入少量的（小于8％）ZrO2石墨材料的力学性能和电学性能明显得到提高；而继续添加ZrO2，石墨材料的力学性能和电学性能则有所下降。     

Modeling the charging of geosynchronous and interplanetary spacecraft using Nascap-2k

Nascap-2k is the updated version of the NASCAP/GEO spacecraft charging analysis code. In addition to packaging the physical content of NASCAP/GEO in a modern way, Nascap-2k incorporates other plasma analysis codes (in particular, the DynaPAC code) in order to extend its applicability to a wide variety of plasma environments. Nascap-2k also includes an interactive Object Toolkit for defining spacecraft surface models for analysis. In this paper we focus on the tenuous plasma charging capabilities of the code, with application to DSCS-III (geosynchronous environment), STEREO (solar wind environment) and MESSENGER (solar wind environment near 0.4 AU).     

High Temperature Flow Stress Prediction of Nano-Al2O3/Cu Composite Using an Artificial Neural Network

Alumina dispersion strengthened copper composite （nano-Al2O3/Cu composite） was recently emerged as a kind of potentially viable and attractive engineering material for applications requiring high strength, high thermal and electrical conductivities and resistance to softening at elevated temperatures. The nano-Al2O3/Cu composite was produced by internal oxidation. The microstructures of the composite were analyzed by the TEM and its hot deformation behavior was investigated by means of continuous compression tests performed on a Gleeble 1500 thermo-simulator. Making use of the modified algorithm-Levenberg-Marquardt （L-M） algorithm BP neural network, a model for predicting the flow stresses during hot deformation was set up on the base of the experimental data. Results show that the microstructures of the composite are characterized by uniform distribution of nano-Al2O3 particles in Cu-matrix. The sliding of dislocations is the main deformation mechanism. The dynamic recovery is the main softening mode with the flow stress decreasing gently from 500℃ to 850 ~C. The recrystallization of Cu-matrix can be retarded late into as high as 850 ℃, when it happens only partially. The well-trained BP neural network model can accurately describe the influence of the temperature, strain rate, and true strain on the flow stresses, therefore, it can precisely predict the flow stresses of the composite under given deforming conditions and provide a new way to optimize hot deforming process parameters.     

加外极化对40CrNi2Si2MoVA钢腐蚀断裂特性的影响

 应用微机辅助电化学测试方法、控制电位慢拉伸及断裂力学试验方法,研究了外加极化对40CrNi2Si2MoVA钢在3.5％NaCl溶液中腐蚀断裂特性的影响。在阳极极化(-635mV)和阴极极化(1 350mV)电位下,慢拉伸断裂总应变ε_f相应为空气中的54％和49％。阳极极化(偶铜)增加了裂纹扩展速率,阴极极化降低了裂纹扩展速度。根据不同条件下腐蚀断裂特性参数的变化,结合宏观及扫描电镜断口分析,该钢在3.5％NaCl溶液中的腐蚀断裂机理为裂尖阳极溶解与氢脆共同作用。     

SnO2-Cu2(OH)3NO3-CuO复合超细粉体的制备及其对AP热分解催化作用

通过水热法合成了SnO2-Cu2(OH)3NO3-CuO、Cu2(OH)3NO3-CuO及SnO2超细粉体,采用XRD、FTIR、TEM和SEM等分析手段对水热产物的物相组成、形貌、粒径进行了分析表征,并考察了它们对AP热分解的催化性能。DSC测试结果表明,水热法合成的SnO2-Cu2(OH)3NO3-CuO复合超细粉体,对AP的热分解催化效果显著,当其添加量为3%时,能使AP的高温热分解峰温降低155℃左右。