激波管中测量JP-10点火延时的吸附问题研究

在JP-10点火延时的激波管实验中,JP-10在激波管壁的吸附导致气相浓度的不确定是测量结果分散的主要原因之一.利用精确测定的吸附曲线确定了实验时JP-10真实的气相浓度,解决了高碳数碳氢燃料点火延时激波管实验时管壁吸附影响燃料气相浓度确定的困难.实验显示JP-10的吸附符合Langmuir吸附等温关系.     

几种典型迎风格式的分析与比较

重点分析了AUSM 格式的构造方法,同时将其与Van Leer, Roe格式等构造方法进行比较和分析,通过求解一维激波管问题,以及二维和三维跨音速流场的计算比较了AUSM 格式,VanLeer格式,Roe格式和中心格式的数值模拟结果和网格适应性,以及在经典四步Runge-Kutta显式时间推进和LU-SGS隐式时间推进下上述四种格式的计算效率.获取了对于基础研究和工程应用很有意义的结论.     

离散光谱分辨率对喷流红外特性FVM计算的影响

建立了辐射传递方程(RTE)的有限元体积法(FVM)计算模型,研究了离散光谱分辨率对FVM计算精度的影响,提出了离散光谱分辨率无关解的概念,并编制了相应的FORTRAN源程序,结合大气飞行发动机标准算例进行了一系列计算和比较.结果表明;在给定的红外光谱域中,随着离散光谱的分辨率的提高,计算出的方向光谱辐射强度渐渐趋向于同一个值.在航空发动机喷流2～5μm红外光谱区间中,当划分150个以上等间隔光谱微元后,FVM可以保证达到离散光谱分辨率无关解.      

复调制ZFFT的TMS320C25实现

介绍了用ＴＭＳ３２０Ｃ２５数字信号处理器实现复调制ＺｏｏｍＦＦＴ（ＺＦＦＴ）频率细化技术，在所举的例子中，用１０２４复数点选带ＦＦＴ获得通常８１９２复数点基带ＦＦＴ的频率分辨力。实验结果表明，此种频率细化方法特别适用于不能同时处理Ｎ点，而又要求Ｎ点ＦＦＴ频率分辨力的频谱分析场合，文中给出了几种提高Ｃ２５ＦＦＴ运算速度的方法，使１０２４复数点ＦＦＴ的运算时间减少到１２．６ｍｓ，可供工程应用参考。     

面向敏捷制造的产品可制造性评价

首先分析了敏捷制造模式对产品可制造性评价的要求，指出评价结果必须反馈给制造伙伴选择系统。提出了面前敏捷制造的产品可制造性评价系统的一个实现框架，讨论了其中的零件信息描述、知识表达、制造伙伴选择和制造资源建模等若干问题。之后着重讨论了材料与毛坯选择、零件结构工艺性、制造资源匹配和标准化检验等评价内容和评价方法。最后给出了简例。     

基于ICCD的空间微光成像系统成像性能研究

研究基于像增强型CCD（ICCD）的空间高分辨率微光成像系统的成像性能。通过理论推导及数学仿真的方法，对系统在微光条件下的能量传递、极限分辨力、信噪比以及调制传递函数进行分析计算。研究表明，系统在黎明照度条件下具有较好探测能力，通过对ICCD器件制冷可以有效提高系统信噪比，实现满月照度的探测成像。     

305m长线缆的回波损耗和近端串扰的测试方法研究

数字平衡线缆广泛应用于综合布线系统以连通设备、互传信息,是工程建设中最常用的传输介质,其质量是保证信息顺利传递的关键,目前国际上通行的测试标准和方法均是基于90m长度的基线模型,而数字平衡线缆在工厂制造中通常是以1 000ft(305m)为基本单位进行绕匝装箱。因此为方便对生产线缆进行性能检测和质量控制,针对整箱线缆的测试方法研究尤为必要。文章提出针对305m长线缆的回波损耗和近端串扰的测试方法,利用网络分析仪和阻抗转换器实现对双绞线所有线对的近端性能测试,并与国际标准进行对比,验证了可以通过测试305m长线缆的回波损耗和近端串扰值来初步判断线缆的传输质量是否合格。     

Mitigation of receiver biases in ionospheric observables from PPP with ambiguity resolution

PPP (Precise Point Positioning) is a GNSS (Global Navigation Satellite Systems) positioning method that requires SSR (State Space Representation) corrections in order to provide solutions with an accuracy of centimetric level. The so-called RT-PPP (Real-time PPP) is possible thanks to real-time precise SSR products, for orbits and clocks, provided by IGS (International GNSS Service) and its associate analysis centers such as CNES (Centre National d'Etudes Spatiales). CNES SSR products also enable RT-PPP with integer ambiguity resolution. In GNSS related literature, PPP with ambiguity resolution (PPP-AR) in real-time is often referred as PPP-RTK (PPP – Real Time Kinematic). PPP-WIZARD (PPP - With Integer and Zero-difference Ambiguity Resolution Demonstrator) is a software that is made available by CNES. This software is capable of performing PPP-RTK. It estimates slant ionospheric delays and other GNSS positioning parameters. Since ionospheric effects are spatially correlated by GNSS data from active networks, it is possible to model and provide ionospheric delays for any position in the network coverage area. The prior knowledge ionospheric delays can reduce positioning convergence for PPP-RTK users. Real-time ionospheric models could benefit from highly precise ionospheric delays estimated in PPP-AR. In this study, we demonstrate that ionospheric delays obtained throughout PPP-AR estimation are actu ally ionospheric observables. Ionospheric observables are biased by an order of few meters caused by the receiver hardware biases. These biases prohibit the use of PPP-WIZARD ionospheric delays to produce ionospheric models. Receiver biases correction is essential to provide ionospheric delays while using PPP-AR based ionospheric observables. In this contribution, a method was implemented to estimate and mitigate receiver hardware biases influence on slant ionospheric observables from PPP-AR. In order to assess the proposed approach, PPP-AR data from 12 GNSS stations were processed over a two-month period (March and April 2018). A comparison between IGS ionospheric products and PPP-AR based ionospheric observables corrected for receiver biases, resulted in a mean of differences of −39 cm and 51 cm standard deviation. The results are consistent with the accuracy of the IGS ionospheric products, 2–8 TECU, considering that 1 TECU is ~16 cm in L1. In another analysis, a comparison of ionospheric delays from 5 pairs of short baselines GNSS stations found an agreement of 0.001 m in mean differences with 22 cm standard deviation after receiver biases were corrected. Therefore, the proposed solution is promising and could produce high quality (1–2 TECU) slant ionospheric delays. This product can be used in a large variety of modeling approaches, since ionospheric delays after correction are unbiased. These results indicate that the proposed strategy is promising, and could benefit applications that require accuracy of 1–2 TECU (~16–32 cm in L1).     

IMPROVEMENT OF PHASE GRADIENT AUTOFOCUS ALGORITHM

ＩＭＰＲＯＶＥＭＥＮＴＯＦＰＨＡＳＥＧＲＡＤＩＥＮＴＡＵＴＯＦＯＣＵＳＡＬＧＯＲＩＴＨＭＬｉＬｉｗｅｉ（李立伟），ＭａｏＳｈｉｙｉ（毛士艺），ＡｓｉｆＲａｚａ，ＬｉｕＹｉｎｇ（刘莹）（ＤｅｐａｒｔｍｅｎｔｏｆＥｌｅｃｔｒｏｎｉｃＥｎｇｉｎｅｅｒｉｎｇ...     

Scientific requirements for future spatially resolved white-light and broad-band high-cadence observations of the Sun

Several important issues are open in the field of solar variability and they wait their solution which up to now was attempted using critical ground-based instrumentations. However, accurate photometric data are attainable only from space. New observational material should be collected with high enough spatial and spectral resolution, covering the whole visible range of the electromagnetic spectrum as well infrared and ultraviolet to reconstruct the total solar irradiance: (1) the absolute contributions of different small-scale structural entities of the solar atmosphere from the white light flares and from micro-flares are still poorly known; (2) we do not know the absolute contributions of different structural elements of the solar atmosphere to the long-term and to the cyclic variations of the solar irradiance, including features of the polar regions of the Sun; (3) the variations of the chromospheric magnetic network are still poorly evaluated; (4) only scarce information is available about the spectral variations of different small-scale features in the high photosphere. Variability of the Sun in white light can be studied with higher spectral, spatial and time resolution using space-born telescopes, which are more appropriate for this purpose than ground based observatories because of better seeing conditions, no interference of the terrestrial atmosphere and a more precise calibration procedure. Scientific requirements for such observations and the possible experimental tools proposed for their solution. Suggested solar studies have broader astrophysical importance.