单目标跟踪技术发展研究

随着机动目标定位与跟踪技术广泛应用于军事和民用领域，研究更为快速、准确的跟踪算法具有十分重要的意义。目标运动模型、跟踪算法和跟踪模型结构是机动目标跟踪技术的三项主要研究内容，文章介绍了这三项技术的研究进展及发展方向。目前，对各种经典模型的组合和改进是目标运动模型的主要研究方向，通过分析并比较工程中常用的卡尔曼滤波、扩展卡尔曼滤波、无迹卡尔曼滤波和粒子滤波的优缺点，探究了它们的不同适用场合及进一步研究方向。详细分析了三代多模型跟踪算法的原理和适用场合，这对研究更为先进的单目标跟踪技术，进一步提高跟踪精度和整体性能，具有一定的参考价值。此外，文章还提出了机动目标跟踪算法的几个发展趋势：将变结构多模型算法与目标实际运动场景结合起来，广泛应用于工程实践中；探索无需依赖于基础模型集合的模型机自适应变化方法；考虑将智能控制理论与变结构多模型跟踪算法互相结合。     

M数缩尺法旋翼颤振动力相似模型设计

本文以延-2复合材料桨叶旋翼为例,用M数缩尺法尝试设计了缩尺比为1/5的颤振相似模型。设计从旋翼颤振微分方程开始,应用π定理得出10个独立相似准则数,列出各有关物理量缩尺因子后进行模型结构设计,从而得出了若干有益的结论。     

地空导弹结构动力学发展概况

以国内外近年来的结构动力学研究及型号设计工作为基础,对地空导弹结构动力学研究的动向作了综述,详细讨论导弹设计中的主要结构动力学问题,阐述结构设计中的模态分析与参数识别及动力响应与载荷识别.颤振是地空导弹设计中非常重要的结构动力学问题,应首先考虑升力面颤振,特别是全动舵颤振分析,常用的计算方法是模态叠加法.风洞模型试验是主要的颤振试验方法.最后叙述全弹组合体颤振计算及控制系统与颤振的相互影响.     

导引头量测故障下的增量式三维制导律设计

考虑导引头量测故障下拦截机动目标的末制导问题,以提高制导系统的鲁棒性、降低制导增益、减小系统残差、避免视线角速率剧烈振荡/发散为目的,基于增量式控制方法设计了一种具有鲁棒增强特性的三维末制导律。首先,将末制导问题转化为零化视线角速率的控制问题。其次,通过弹目相对距离及视线角速率定义辅助变量,给出传统的滑模制导律作为设计参考。然后,基于增量式非线性动态逆滑模控制方法,充分挖掘视线角加速度估计信息及上一采样时刻的制导指令,得到增量式三维鲁棒制导律。最后,在目标机动及导引头量测故障下,分析并比较了两种制导律所产生的系统残差。理论分析及多工况仿真结果表明,增量式制导律不仅对目标机动及大范围失效的导引头量测故障具有强鲁棒性,而且所需制导增益也较小,同时避免了末端视线角速率严重发散的问题     

A practical nonlinear robust control approach of electro-hydraulic load simulator

This paper studies a nonlinear robust control algorithm of the electro-hydraulic load simulator （EHLS）. The tracking performance of the EHLS is mainly limited by the actuator＇s motion disturbance, flow nonlinearity, and friction, etc. The developed controller is developed based on the nonlinear motion loading model. The problems of the actuator＇s disturbance and flow nonlinearity are considered. To address the friction problem, the friction model of the loading motor is identified experimentally. The friction disturbance is compensated using the obtained friction model. Therefore, this paper considers the main three factors comprehensively. The developed algorithm is easy to apply since the controller can be obtained just with one step back-stepping design. The stability of the developed algorithm is proven via Lyapunov analysis. Both co-simulation and experiments are performed to verify the effectiveness of this method.     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

基于损伤型本构高过载下装药强度数值仿真方法研究

为了准确反映改性双基推进剂装药在高过载发射条件下的破坏情况,采用基于含累积损伤的非线性粘弹性本构模型,利用ABAQUS有限元软件二次开发的UMAT子程序,对某型火箭弹在过载发射情况下的装药进行了数值研究,分析了装药在高过载条件下的变形行为和力学特性。结果显示,在最大加速度为1.39×104g的高过载下,最大应力发生在装药底部内孔处;装药径向尺寸变化很小,可以忽略发动机壳体对装药外表面的约束而将其视为自由表面。比较了最大应力强度准则和累积损伤准则对装药在加速度冲击和压强端面冲击载荷下破坏的判断,两种判据的结果都表明,装药在高过载冲击载荷下没有被破坏。     

基于试验的电动舵机模型辨识

目前电动舵机模型的建立基本上是基于理论的数学推导,所建立的舵机模型与实际舵机模型存在一定的误差。针对此问题,提出一种基于试验实测数据建立舵机模型的方法,搭建自动数据采集试验平台,采用组合窗法对实测数据进行频域转换,得到舵机的频率响应函数并采用非线性最小二乘法辨识舵机模型。对辨识得到的数学仿真结果与实际舵机响应比较,在频域,整个频段内幅频特性最大绝对误差1.9 dB;在时域,仿真模型跟踪实际舵机角度的最大误差1.5°,延迟时间10 ms。结果表明,基于试验数据建立的舵机仿真模型能很好地模拟实际舵机。     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。