机载系统和设备合格审定中的软件要求（下）

7.0 软件配置管理和质量保证规则 软件配置管理(SCM)规则是硬件配置管理的扩展,它专门讨论从最初设计需求一直到整个使用期间,软件的标识、控制、报告和审查的特性。软件质量保证(SQA》规则通过独立地审查设计需求和产生的代码,看其是否符合标准、符合可测试性和从需求到代     

基于最小曲率半径的软波导安全裕度校核方法

针对传统软波导安全裕度校核方法存在不够准确和/或计算量难以承受的缺陷,文章提出一种基于最小曲率半径的软波导安全裕度校核方法,分析其可行性、便利性及准确性,并给出具体的计算步骤.对同一个算例的分析结果表明,与传统方法相比,此方法可以更加准确地反映软波导的安全裕度.     

卫星通信地面终端射频一致性测试及仿真分析

介绍了卫星通信系统体制、地面终端的基带处理过程,以及发射机射频指标和测试算法,利用MATLAB和ADS软件搭建了基带信号生成模块、发射机模块,对终端发射机的发射功率、误差矢量幅度、占用带宽、邻道干扰进行了仿真。仿真结果表明,上变频器的射频带宽过小会使调制信号的误差矢量幅度增大,放大器工作在非线性区会对占用带宽和邻道干扰有较大影响,使发射机不满足射频一致性要求。本文的研究结果对设计卫星通信地面终端具有一定的借鉴意义。     

面向TensorFlow和PyTorch的线性代数基准测试

传统的高性能线性代数计算库如BLAS需要开发者具备丰富的性能优化经验,使用困难。TensorFlow、Pytorch等AI框架提供了简单的开发接口,促进了机器学习应用的发展。这些AI框架大量进行线性代数计算,但是不清楚其是否针对线性代数计算进行了性能优化。设计了一组线性代数计算测试程序,评估了AI框架对的线性代数计算的...     

A salient edges detection algorithm of multi-sensor images and its rapid calculation based on PFCM kernel clustering

Multi-sensor image matching based on salient edges has broad prospect in applications, but it is difficult to extract salient edges of real multi-sensor images with noises fast and accurately by using common algorithms. According to the analysis of the features of salient edges, a novel salient edges detection algorithm and its rapid calculation are proposed based on possibility fuzzy C-means （PFCM） kernel clustering using two-dimensional vectors composed of the values of gray and texture. PFCM clustering can overcome the shortcomings that fuzzy C-means （FCM） cluster- ing is sensitive to noises and possibility C-means （PCM） clustering tends to find identical clusters. On this basis, a method is proposed to improve real-time performance by compressing data sets based on the idea of data reduction in the field of mathematical analysis. In addition, the idea that kernel-space is linearly separable is used to enhance robustness further. Experimental results show that this method extracts salient edges for real multi-sensor images with noises more accurately than the algorithm based on force fields and the FCM algorithm; and the proposed method is on average about 56 times faster than the PFCM algorithm in real time and has better robustness.     

Accuracy enhancement of the spherical actuator with a two-level geometric calibration method

This paper presents a two-level geometric calibration method for the permanent magnet （PM） spherical actuator to improve its motion control accuracy. The proposed actuator is com- posed of a stator with circumferential coils and a rotor with multiple PM poles. Due to the assembly and fabrication errors, the real geometric parameters of the actuator will deviate from their design values. Hence, the identification of such errors is critical for the motion control tasks. A two-level geometric calibration approach is proposed to identify such errors. In the first level, the calibration model is formulated based on the differential form of the kinematic equation, which is to identify the geometric errors in the spherical joint. In the second level, the calibration model is formulated based on the differential form of torque formula, which is to calibrate the geometric parameters of the magnetization axes of PM poles and coils axes. To demonstrate the robustness and availability of the calibration algorithm, simulations are conducted. The results have shown that the proposed two-level calibration method can effectively compensate the geometric parameter errors and improve the positioning accuracy of the spherical actuator.     

端壁附面层抽吸对对转压气机性能的影响

以双级对转压气机为研究对象,通过在两排转子机匣处开设抽吸孔,采用数值方法研究了不同抽吸流量下端壁附面层抽吸对压气机性能的影响,为吸附式压气机优化设计提供参考。计算结果表明:在级环境下端壁附面层抽吸可以提升压气机失速裕度,但抽吸流量过大会对效率造成一定损失,当抽吸1.6%流量时失速裕度提升了3.8%,压气机性能达到最佳;失速主要由间隙泄漏涡引起并首先在第二排转子叶尖发生,抽吸削弱了泄漏涡的强度推迟失速发生;端壁附面层抽吸增大了叶尖流通能力,使转子叶尖效率和压比得到提升,并有效改善了出口导叶流场。     

超燃冲压发动机旋转斜坡概念研究

基于斜坡增强混合及旋转冲压的设计思想,提出一种旋转斜坡概念,即通过斜坡旋转产生大尺度旋涡及旋转运动激波来增强混合。采用Fluent软件求解URANS方程,对旋转斜坡非定常流场开展了数值模拟研究,分析了斜坡旋转速度对燃烧室的流场特征、涡量、总压损失等性能的影响。结果表明斜坡旋转促进了凹腔剪切层的振荡,并在凹腔内形成了较强烈的流向旋涡。当旋转速度54.3r/min时,斜坡旋转导致的流向涡量峰值约是无旋状态下的4倍左右,总压恢复系数比斜坡静止状态最大降低约10%。     

舰载机增升装置对薄翼型升力系数的影响研究

描述了增升装置在提高舰载机薄翼型升力系数方面的作用,观察到大偏角前缘襟翼小迎角时对翼型升力曲线的影响,并通过与试验现象对比,初步探讨了非线性作用形成的可能机理。利用数值模拟方法,通过有限元计算软件对相同流场中多种增升装置的升力系数进行了模拟与比较,从而达到合理设计舰载战机翼型的目的。CFD计算结果表明,所设计的二维多段翼型有良好的气动特性,升力系数得到提高,具有较好的增升效果。     

激光陀螺四位置寻北仪提高精度方法

为消除激光陀螺零偏和常值漂移的影响,采用四位置方案来实现高精度寻北。本文简述了单轴激光陀螺四位置寻北方案,给出了陀螺敏感轴与机体系前向偏差角标定方法,研究了寻北仪在倾斜基座下数据补偿算法。本文研究了由于在四个位置上电机转动不到位所引起的误差补偿算法。通过对寻北仪系统测试,采用电机转动不到位补偿后数据标准差降低了0.02º,激光陀螺寻北仪系统达到了高精度快速寻北的要求。