基于S1000D的飞机系统原理图册编制方法研究

飞机系统原理图册(SSM)是辅助飞机排故及培训的重要手册,目前,传统纸质版SSM包含信息多,结构化程度低,查阅不变,理解困难,交互性差。为此,本文通过分析传统飞机系统原理图册的数据需求、生成过程及使用场景,基于S1000D标准结构化的思想,提出了飞机系统原理图册结构化教据存储方式及交互式编制使用方法。该方法应用S1000D的标准化信息分类及数据架构,将系统原理图册相关信息元素进行结构化转化,明确其逻辑关联关系及使用模式,一方面可以用于军民用飞机原理图册交互式电子技术手册(IETM)的研制,另一方面也为IETM拓展为综合保障信息系统提供参考。     

可重构零空间控制分配算法及流程规划

针对飞机正常情况和舵面故障情况下的控制分配算法展开研究。根据控制效能矩阵的特点设计了性能指标,并给出了对应的最优逆控制。对带约束的一般控制分配问题,采用零空间横截方法进行了再分配。设计了针对舵面卡死故障的重构控制律。结合某飞机仿真平台,进行了卡死故障的重构仿真,结果表明,控制分配算法能够在故障状态下完成对指令的精确跟踪。     

结冰对民用飞机飞行性能的影响分析

在获取民用飞机适航合格审定证明前,必须通过飞行试验,并在试验中演示验证民用飞机能在CCAR25部附录C确定的连续和间断的最大结冰状态下安全运行。基于此背景,计算并得到某型机两种构型在45min待机冰型下的飞行性能,与无冰状态下对应构型的飞行性能进行对比分析。结果表明,结冰对飞机的飞行性能具有较大的影响。     

一种减少失速保护虚警率的混合滤波方法

针对飞机失速保护设计过程中易出现虚警的情况,提出一种基于FIR和传统滤波器相结合的混合滤波方法。结合飞机本体的运动特征,对参与失速保护逻辑运算的两个重要参数,即侧向加速度和迎角信号进行频率分析,基于信号的特征设计混合滤波器,然后采用Simulink滤波工具箱设计滤波器对信号进行滤波处理。仿真结果表明该方法能够减少虚警率的发生,特别是大背景噪声下的虚警率能够得到较好抑制,验证了滤波器设计正确性,从而提高失速保护功能对适航条款符合性。该滤波器设计方法,不但可以有效解决本文提到的问题,对于其他涉及信号处理的系统设计同样具有借鉴意义。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

基于非线性气动力的飞机飞行载荷计算

为了研究气动力非线性对飞机静气动弹性特性及飞行载荷的影响,发展了一种基于非线性气动力的飞机静气弹及飞行载荷计算方法。通过引入CFD计算结果,实现对线性方法中的气动力影响系数矩阵的非线性修正,采用模态法求解静气弹配平方程得到飞机非线性的气弹变形及飞行载荷。以某翼身组合体构型为计算算例,分别针对刚性模型和柔性模型,基于非线性气动力完成了飞机静气动弹性分析及载荷计算,并与线性结果进行了对比分析。结果表明,非线性方法可对大迎角范围内飞机静气弹变形及飞行载荷做出较合理的预测。     

综合时序信息的试验优化设计及稀疏求解

考虑不同试验点的试验成本及试验时序信息,在性能指标与影响因素间的响应模型未知情况下,利用装备系统的先验信息构造模型驱动的基函数,构造相应的回归模型来刻画系统的内在关系,分析不同试验点成本及试验时序对试验方案的影响。定义了一种考虑空间权重及批序贯时序的非均匀最优设计模型,将稀疏理论引入到回归试验设计中,把不同批次试验下的回归试验设计模型参数估计问题转换为结构化稀疏重构问题,讨论了非均匀最优设计的构造定理,提出结构化稀疏参数求解算法。算例表明:利用本方法生成的试验点考虑了试验点空间权重和试验时序信息,更符合实际试验规程;采用本方法获得的响应函数得到的期望预测误差更小。     

基于概率统计的DS/FH系统干扰检测算法

基于时频分布的干扰检测算法是DS/FH（Direct Sequence/Frequency Hopping,直接序列扩频/跳频扩频）系统干扰检测的传统手段,针对其运算量大、实时性差,以及无法检测某些特殊干扰信号等问题,提出一种基于概率统计的干扰检测算法.通过统计DS/FH系统频谱图中各频率的幅值出现位置,以DS/FH信号与干扰信号频谱分布规律的差别为判决依据,完成DS/FH系统中干扰信号的检测.分析和仿真结果表明：该检测算法能够有效识别DS/FH系统中的典型干扰信号,与传统基于时频分布的检测算法相比,能够实现某些特殊干扰信号的有效检测;同时,由于该算法不需要进行复杂的时频联合分析,其运算复杂度大大降低,能够实现DS/FH系统干扰信号的快速检测.     

无线电高度表信号模拟器射频信号延时/衰减模块设计

无线电高度表程控信号模拟器是无线电高度表自动测试系统（ATE,ATS）的重要组成部分,而射频信号延时/衰减模块则是无线电高度表程控信号模拟器3个功能模块组件中的核心模块。研制了一种采用声表面波（SAW）延迟线作为射频信号延时器件、射频衰减器作为射频信号功率衰减器件,通过程控射频开关控制不同声表面波延迟线的切换,包含射频信号变频、放大等结构电路的无线电高度表信号模拟器射频信号延时/衰减模块。经无线电高度表自动测试系统的实际工程应用表明,该无线电高度表射频信号延时/衰减模块对C波段（4.2～4.4 GHz）射频调制信号的延时精度高、衰减范围大,体小、质轻,适合置于无线电高度表测试适配器内部使用,具有较高的工程应用价值。