“任务驱动”下的计算机专业课程教学实践与探索

本文总结了“任务驱动”在教学中的应用，提出了“任务”设计要全方位立体化进行考虑；评价要全方位多样化。指出了“任务驱动”必须与多种教学法优化组合，才能发挥其最大教学效率。     

Application in prestiction friction compensation for angular velocity loop of inertially stabilized platforms

To overcome the influence of the nonlinear friction on the gimbaled servo-system of an inertial stabilized platforms(ISPs) with DC motor direct-drive, the methods of modeling and compensation of the nonlinear friction are proposed. Firstly, the inapplicability of LuGre model when trying to interpret the backward angular displacement in the prestiction regime is observed experimentally and the reason is deduced theoretically. Then, based on the dynamic model of direct-drive ISPs, a modified LuGre model is proposed to describe the characteristic of the friction in the prestiction regime. Furthermore, the state switch condition of the three friction regimes including presliding, gross sliding and prestiction is presented. Finally, a composite compensation controller including a nonlinear friction observer and a feedforward compensator based on the novel LuGre model is designed to restrain the nonlinear friction and to improve the control precision. Experimental results indicate that compared with those of the conventional proportion–integration–differentiation(PID) control method and the PID plus LuGre model-based friction compensation method, the dwell-time has decreased from 0.2 s to almost 0 s, the position error decreased to 86.7%and the peak-to-peak value of position error decreased to 80% after the novel compensation controller is added. It concludes that the composite compensation controller can greatly improve the control precision of the dynamic sealed ISPs.     

基于 VxWorks 的大容量 SATA 电子盘驱动实现

本文讲述了大容量 SATA 电子盘在 VxWorks 操作系统中的驱动设计过程.介绍了硬件系统组成,描述了 VxWorks 中 SATA 电子盘设备的驱动流程,MPC8377 CPU 自带 SATA 控制器的配置和大容量电子盘的配置,以及文件系统的建立过程     

通过任务驱动教学模式提高教师实践技能

根据数控加工任务驱动教学的改革与实践,提出通过任务驱动教学过程提高教师实践技能的方法,在数控加工任务驱动中,当教师准备课程时,通过试做任务(目标零件)、完成任务(加工目标零件),可有效地提高实践技能.这为适应工学结合教学改革,提高教师实践技能素质,做了有益的探索.     

东芝二次雷达天线驱动系统的改进

本文简要介绍了东芝二次雷达天线驱动系统的构成和工作情况，以及故障后采用国产器件进行改造的方案。     

BTL技术研究与应用

首先应用传输线分布参数理论，分析了总线驱动问题和TTL收发技术的缺点；并深入分析了BTL的传特原理、功耗、抗噪能力和传输延迟等参数；最后，简单介绍了BTL技术在“机载可重构多机系统”项目中的应用．     

欠密等离子体柱空间散射特性的数值分析

以等离子体的介质模型为基础，给出了等离子体双站ＲＣＳ公式与计算实例；分析了等离子体电参量对欠密等离子体柱双站ＲＣＳ的影响。     

以数字化工卡为核心技术的修理新模式探索

针对航空修理企业和现状,提出以数字化工卡为核心的修理新模式,阐述了数字化工卡的概念,描述了以数字化工卡为核心的修理模型,重点针对数字化工卡驱动修理过程中各信息系统要素的修理模式进行了分析和探索,为从信息化层面有效整合航修企业各项资源,搭建快捷、高效的航空装备修理平台,加快转变航空装备修理保障能力生成模式提供了有效途径。     

氦气驱动预压涡轮泵启动初期反流问题分析

用于某液体火箭发动启动动系统的气驱预压涡轮泵在起动初期出现了气体反流,导致预压泵呈夹气状态,对发动启动动过程控制不利。根据驱动试验系统原理,在MWorks平台中对驱动过程进行了仿真。对预压泵采用了Suter全特性表达式,对涡轮管路及排放路分别建立了描述排空与两相流动过程的简化数学模型。结果 表明,导致反流的原因为涡轮入...