基于光滑件的缺口件疲劳强度分散性估算方法

提出了一个缺口件疲劳强度分散性的估算方法,该方法只需要材料P-S-N曲线和缺口件的几何信息.影响缺口件疲劳强度分布的因素主要有材料的分散性和缺口效应的分散性两部分.本文采用改进的相等破坏概率方法求出光滑件的疲劳强度分布,该方法可充分考虑成组和升降法疲劳试验结果,由应力场强法和历史信息获得疲劳缺口系数的分布,并由此得到缺口件疲劳强度分布.完成了2024-T3和7075-T6铝合金的8个算例,结果表明该方法所得结果令人满意.     

加筋圆柱曲板稳定性的微分求积单元法分析

加筋圆柱壳和圆柱曲板在工程领域中有着广泛的应用,其稳定性特性是设计人员十分关注的一个问题。本文首次尝试应用微分求积单元法分析加筋圆柱曲板的稳定性问题。采用了新的确定权系数的方法建立了微分求积圆柱曲板单元,并给出了详细的分析过程。将微分求积单元法的计算结果与现有的数值结果进行了比较来验证所建立的微分求积单元法的分析过程及结果的正确性,还给出了一些新的数据和图线供设计参考或者用于新方法的验证。     

Flight Flutter Modal Parameters Identification with Atmospheric Turbulence Excitation Based on Wavelet Transformation

针对基于大气紊流激励的飞机颤振试验数据具有信噪比低以及测量数据以加速度响应形式给出等特点,将小波变换与随机减量法相结合对飞机颤振模态参数进行识别,首先利用随机减量法获得结构在非零初始加速度条件下的自由衰减响应,然后对该自由衰减响应进行Morlet连续小波变换,为使变换简单,本文采用了Parseval定理和留数定理,利用Morlet的带通滤波特性,通过搜索小波变换系数在不同的尺度区域内的极大值,再根据小波变换系数的极大值、相角与固有振动频率及阻尼系数间的关系,即可识别出各模态参数。并对利用小波变换识别颤振模态参数时,实现模态解耦应满足的条件进行了分析研究。通过仿真和飞机颤振试验数据分析,验证了该识别方法不仅简单、有效和可行,而且具有较强的抗噪性。     

一阶滞后对象广义预测控制下的闭环稳定性分析

 利用参数模型和非参数模型相结合的方法,给出了一阶滞后对象在广义预测控制下闭环稳定的充要条件。发现:(1)对开环稳定的一阶滞后对象,总存在一组控制器参数,使得在该控制器控制下,无论对象的开环增益K与时间常数T如何变化,闭环系统都保持稳定;(2)对于开环不稳定的一阶滞后对象,无论控制器参数如何选取,当K和T的变化超出一定范围时,闭环系统就会失去稳定性。     

Microstructure and Optical Characterization of Magnetron Sputtered NbN Thin Films

Some fundamental studies on the preparation, structure and optical properties of NbN films were carried out. NbN thin films were deposited by DC reactive magnetron sputtering at different N2 partial pressures and different substrate temperatures ranging from –50 ℃ to 600 ℃. X-ray diffraction analysis (XRD) and scanning electron microscopy (SEM) were employed to characterize their phase com- ponents, microstructures, grain sizes and surface morphology. Optical properties inclusive of refractive indexes, extinction coefficients and transmittance of the NbN films under different sputtering conditions were measured. With the increase in the N2 partial pressure, δ-NbN phase structure gets forming and the grain size and lattice constant of the cubic NbN increasing. The deposited NbN film has relatively high values of refractive index and extinction coefficient in the wavelength ranging from 240 nm to 830 nm. Substrate tem- perature exerts notable influences on the microstructure and optical transmittance of the NbN films. The grain sizes of the δ-NbN film remarkably increase with the rise of the substrate temperature, while the transmittance of the films with the same thickness decreases. Ultra-fine granular film with particle size of several nanometers forms when the substrate is cooled to –50 ℃, and a remarkable aug- mentation of transmittance could be noticed under so low a temperature.     

基于牛顿欧拉法的3-RPS并联机构逆动力学分析

 以3-RPS机构为例,研究了对称少自由度并联机构的逆动力学问题。因其自由度数目小于6,该类机构的支链不仅传递驱动力,同时还需为动平台提供约束。然而,现有文献大多未对广义约束力给予足够的重视。采用牛顿欧拉法建立了3-RPS机构的刚体动力学方程,给定动平台的运动规律及外载荷后,可一并求解机构所需的驱动力与约束力矩。算例仿真表明,与动平台自由速度方向不一致的外载荷主要需由约束力矩平衡。因此,在对称少自由度并联机构动力学设计中,必须计入广义约束力的影响。     

Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates

The study is a first attempt to prepare bulk NiTi/NiTi shape memory alloy (SMA) laminates with a macroscopic heterogeneous composition by explosive welding and investigate their microstructures and martensitic transformation behaviors. After explosive weld- ing, a perfect interfacial bonding between the two components and a reversible martensitic transformation are realized in the tandem. Results show achievement of a fine granular structure and the maximum value of microhardness near the welding interface because of the excessive cold plastic deformation and the high impact velocity during the explosive welding. Meanwhile, the effects of aging on the transformation of the welded tandem are investigated by differential scanning calorimeter (DSC) and subject to discussion. The trans- formation temperatures of NiTi/NiTi SMAs increase with the rise of the aging temperature. The experimental results indicate the shape memory properties of NiTi/NiTi SMA fabricated by explosive welding can be improved by optimizing the aging technology.     

星载低噪声放大器噪声系数的高精度测试方法研究

噪声系数是低噪声放大器的关键指标,它决定了系统的噪声性能.然而现有的测量方法不能修正失配和噪声参数误差,只能给出基于源阻抗的噪声系数.为了提高低噪声放大器噪声系数的测量精度,文章基于矢网冷源噪声系数测试方法,给出优选的矢量噪声校准法,并提出5项重要技术措施以进一步提高低噪声放大器噪声系数的测量精度.相比Y因子法,矢网冷...     

椭圆内聚激波面间断化过程的激波动力学分析

针对椭圆内锥几何约束下激波的非均匀汇聚问题,利用高超声速等价原理,将三维定常椭圆内锥激波转化为二维非定常椭圆内收缩运动激波。根据激波动力学原理,发展出一种既能得到非定常激波面演变过程及参数分布,又能沿着激波面追踪扰动传播过程的“波面-扰动追踪法”。该方法不仅具有快速预测激波非均匀汇聚及其演变过程的特点,而且有助于揭示激波面从连续弯曲演变出间断的内在机理。研究表明：初始沿周向强度均匀,而几何形状偏离轴对称的椭圆内聚激波受到自身产生的非均匀“Shock-Compression”扰动,在向中心汇聚的过程中,激波强度非均匀性出现且不断加剧。由于长轴附近的激波面曲率大,激波强度增长得更快。而激波强度的非均匀性会导致扰动的聚集,使得原本连续光滑的激波面出现间断,进而将初始长、短轴附近的激波面分割为强、弱两对激波段。增大长短轴比,椭圆激波的非均匀性演化更快,激波面更早地出现间断。利用“波面-扰动追踪法”对椭圆激波汇聚过程进行分析,为解决三维定常内锥激波的非均匀汇聚问题提供了新的途径。