旋转爆震发动机爆震波建立过程实验研究

为了深入研究旋转爆震发动机爆震波建立过程及形成机理,采用小能量火花单次点火的方式进行了一系列旋转爆震发动机起爆实验。发动机采用环缝-喷孔对撞式掺混方式,燃料为H2,氧化剂为空气,实验成功起爆旋转爆震波,并连续旋转稳定传播,爆震波传播频率为5.09~6.45k Hz,传播速度为1286~1644.8m/s。在发动机稳定工作过程中,集气腔与燃烧室相互影响,二者处于平稳的动态平衡。其次,通过对旋转爆震波起爆过程详细分析发现,点火形成的初始火焰在环形燃烧室经历一个类似DDT的火焰发展过程,成功转变为爆震波,且从点火到爆震波建立之间的火焰发展传播过程和时间间隔均表现出很强的随机性。此外,为验证小能量火花点火的可靠性,还进行了小能量点火重复性实验,发现在稳定工况条件下采用小能量点火成功率最高可达100%,各组旋转爆震波传播速度在1440m/s附近波动。     

整体涡对跨声速单转子性能和稳定性影响

为研究整体涡影响轴流压气机性能和稳定性的机理,设计了一种叶片式旋流发生器,并对旋流发生器和跨声速单转子进行了联合数值模拟研究.计算结果表明:反向整体涡导致堵塞点流量、进口攻角和总压比增加,效率和稳定工作范围降低;同向整体涡导致堵塞点流量、进口攻角、总压比和稳定工作范围减小,效率增加;反向整体涡导致50%叶高以上吸力面附面层分离以及叶尖泄漏流堵塞加剧是压气机失稳的主要原因.      

基于确定学习理论的轴流压气机系统分岔预测

针对轴流压气机系统中的分岔预测问题,基于简化的Moore-Greitzer 3阶压气机模型,分析了该系统中存在的分岔现象;利用最新发展的确定学习理论,对压气机系统随着γ参数变化出现的几种典型模态的相关系统动态进行辨识,并将所学知识保存成常值RBF神经网络以构成模式库;利用该模式库构建1组嵌入了常值RBF神经网络的动态估计器;将测试模式与估计器相比,得到1组残差,并利用动态模式识别方法的残差最小原则实现了对Pitchfork分岔的预测。     

一种减少失速保护虚警率的混合滤波方法

针对飞机失速保护设计过程中易出现虚警的情况,提出一种基于FIR和传统滤波器相结合的混合滤波方法。结合飞机本体的运动特征,对参与失速保护逻辑运算的两个重要参数,即侧向加速度和迎角信号进行频率分析,基于信号的特征设计混合滤波器,然后采用Simulink滤波工具箱设计滤波器对信号进行滤波处理。仿真结果表明该方法能够减少虚警率的发生,特别是大背景噪声下的虚警率能够得到较好抑制,验证了滤波器设计正确性,从而提高失速保护功能对适航条款符合性。该滤波器设计方法,不但可以有效解决本文提到的问题,对于其他涉及信号处理的系统设计同样具有借鉴意义。     

Numerical analysis and optimization of boundary layer suction on airfoils

Numerical approach of hybrid laminar flow control(HLFC) is investigated for the suction hole with a width between 0.5 mm and 7 mm. The accuracy of Menter and Langtry’s transition model applied for simulating the flow with boundary layer suction is validated. The experiment data are compared with the computational results. The solutions show that this transition model can predict the transition position with suction control accurately. A well designed laminar airfoil is selected in the present research. For suction control with a single hole, the physical mechanism of suction control, including the impact of suction coefficient and the width and position of the suction hole on control results, is analyzed. The single hole simulation results indicate that it is favorable for transition delay and drag reduction to increase the suction coefficient and set the hole position closer to the trailing edge properly. The modified radial basis function(RBF) neural network and the modified differential evolution algorithm are used to optimize the design for suction control with three holes. The design variables are suction coefficient, hole width, hole position and hole spacing. The optimization target is to obtain the minimum drag coefficient. After optimization,the transition delay can be up to 17% and the aerodynamic drag coefficient can decrease by 12.1%.     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

旋转机翼悬停气动特性研究

鸭式旋转机翼(CRW)是一种先进的高速直升机方案,旋翼同时也是机翼,是其最关键气动部件之一。采用结构分区拼接网格技术进行空间离散,分区建立参考系,通过求解多重参考系下的N-S方程来计算旋翼流场,首先以传统的Caradonna-Tung实验旋翼的亚、跨声速悬停流场分析为例验证该方法的可靠性,进而采用该方法对旋转机翼悬停流场进行了数值计算,旋翼拉力计算值和地面实验值吻合较好,结果分析表明旋转机翼的悬停流场有着不同于传统旋翼的流场特性。     

旋转进口畸变频率对跨声速压气机稳定性影响的数值研究

为了研究旋转进口畸变对于压气机失速过程的影响,以及探讨最易诱发压气机失速的扰动频率即特征频率存在性的问题,采用非定常方法计算研究了4种不同频率的进口旋转畸变对跨声压气机Rot or37失速起始过程的影响。结果表明:在同样幅值条件下,当旋转频率与失速扰动频率相近时的畸变会引起失速,反之亦然;进口畸变的低压区引起部分叶片通道内流动结构失稳后,在叶尖泄漏涡破碎的作用下通道内形成严重堵塞,从而导致压气机失速。该方法能够较好地描述转子中失速团的发展过程,同时得出了进口畸变频率对失速过程影响的物理机制。     

大量程MEMS陀螺仪在高速旋转导弹上的应用

弹旋频率是影响旋转导弹制导精度的主要因素之一.本文提出了一种弹旋频率测量用大量程MEMS陀螺仪技术方案,开展了大量程MEMS陀螺仪在旋转导弹上的应用研究,解决了大量程MEMS陀螺仪在偏心安装、较大力学环境下提高测量精度等问题,通过了飞行试验验证,实现了旋转导弹弹旋频率的精确测量.     

S形进气道锤击波荷载特性分析

利用基于改进的延迟分离涡模拟（IDDES）方法,对亚声速和超声速来流条件下某S形模型进气道进行了非定常计算,研究了发动机喘振所产生的瞬时高压波形对锤击波传播规律的影响.结果表明:锤击波产生后沿进气道迅速向前传播,运动过程中锤击波的运动速度基本保持不变,但强度不断增强.同时受气流离心力的影响,S形进气道弯曲段半径较大一侧壁面受到的锤击波气动荷载值更大.发动机喘振所产生的瞬时高压的加载梯度增加使得锤击波传播速度及强度增强,而压力卸载方式对锤击波强度的影响不明显.在亚声速和超声速来流条件下,增加瞬时高压峰值均使得锤击波荷载强度显著增强,并近似符合二次函数分布规律,而且超声速来流条件下锤击波强度较亚声速来流更强.