A survey of safety separation management and collision avoidance approaches of civil UAS operating in integration national airspace system

Recent years have witnessed a booming of the industry of civil Unmanned Aircraft System (UAS). As an emerging industry, the UAS industry has been attracting great attention from governments of all countries and the aviation industry. UAS are highly digitalized, informationized, and intelligent; therefore, their integration into the national airspace system has become an important trend in the development of civil aviation. However, the complexity of UAS operation poses great challenges to the traditional aviation regulatory system and technical means. How to prevent collisions between UASs and between UAS and manned aircraft to achieve safe and efficient operation in the integrated operating airspace has become a common challenge for industry and academia around the world. In recent years, the international community has carried out a great amount of work and experiments in the air traffic management of UAS and some of the key technologies. This paper attempts to make a review of the UAS separation management and key technologies in collision avoidance in the integrated airspace, mainly focusing on the current situation of UAS Traffic Management (UTM), safety separation standards, detection system, collision risk prediction, collision avoidance, safety risk assessment, etc., as well as an analysis of the bottlenecks that the current researches encountered and their development trends, so as to provide some insights and references for further research in this regard. Finally, this paper makes a further summary of some of the research highlights and challenges.     

燃气的基准表及图制定

本文在阐述基准的热力学概念基础上,提出了燃气基准的计算方法,应用CHAPPELL推荐的有关燃气热力性质表达式,导出计算燃气基准的公式,通过微机计算,将结果整理成燃气基准的有关表、图。     

加入WTO对中国航空货物运输的影响分析

针对中国加入WTO对航空货物运输的影响，从溢出效应、竞争、辅助市场的开放、市场准入、管理、WTO规则和机制6个方面进行了分析。强调要全面和发展地看待WTO给航空货物运输带来的影响，以及要更加注重掌握WTO的规则和机制，才能更好地理解WTO对航空货物运输企业经营环境和约束条件的影响。     

三轴稳定遥感卫星姿控系统故障情况下的系统重构

论述三轴对地稳定遥感卫星姿控系统中部分轮子或部分陀螺故障情况下的姿控系统重构。文中论述了只在俯仰通道有一偏置动量轮正常工作，而滚动和偏航通道轮子故障条件下的系统重构。另外还论述了偏航陀螺故障，姿控系统其它部件正常情况下，控制系统采用Whecon原理与PIM控制相结合的设计。以上两种系统重构拟用于实际系统中，经过数学仿真验证，姿控系统在故障情况下能够完成基本任务。     

X射线探伤机空气比释动能率测量不确定度评定

基于X射线探伤机空气比释动能率测量的数学模型，对其测量不确定度进行了评定。     

多点法测量形状误差的补偿控制系统

经过对误差分离技术理论进行了分析之后,又对误差补偿技术进行了研究,并建立了多点法测量形状误差的补偿控制系统。通过补偿主轴径向误差运动,提高了工件的圆度误差和圆柱度误差。     

飞机主操纵系统疲劳试验载荷谱小操纵位移频次问题研究

针对飞机全机主操纵系统疲劳试验载荷谱中小操纵位移频次影响问题进行了分析和讨论,确定了某机全机主操纵系统小操纵位移频次的级别。同时,在原某机全机主操纵系统疲劳试验载荷谱的基础上再次对其小操纵位移频次进行了计算,去掉了这一级别以下对全机主操纵系统疲劳试验无影响的小操纵位移频次,从而完善了主操纵系统疲劳试验载荷谱。另外,对小操纵位移频次问题研究结果在其全机主操纵系统疲劳试验中的实施效果进行了阐述。     

空战机动动作库设计方式研究

具体阐述了两类常见空战动作库的设计 :典型战术动作库和基本操作动作库 ,详细分析了这两类空战机动动作库的不足 ,最后提出了改进动作库设计的具体意见和建议。     

滚珠丝杠螺距误差补偿法提高数控机床定位精度的研究

在详细论述、对比了实现数控机床滚珠丝杠螺距误差补偿的硬件、软件方法的原理基础上,对滚珠丝杠螺距误差软件补偿法可有效提高数控机床的定位精度进行了试验验证。     

区域极点及方差约束下的航天器拦截控制：静态输出反馈情形

本文提出并讨论了具有选通窗约束的航天器拦截控制问题，指出航天器拦截控制的稳暂态性能指标可表现为系统稳态状态方差及闭环区域极点的形式。然后，基于配置控制的思想，本文完整地给出了期望静态反馈控制器的存在条件及其解析表达式，并举例说明所提设计方法的直接性与有效性