利用高空科学气球收集宇宙尘粒

本文叙述了高空科学气球上一种自行研制的宇宙尘收集器以及气球吊篮系统。利用该系统进行了五次高空字宙尘粒的收集飞行,简述了对所收集的尘粒进行系统研究的结果。     

A general calculation method to specify center-of-buoyancy for the stratospheric airship with multiple gas cells

As the lighter-than-air (LTA) flight vehicle, the stratospheric airship is a desirable platform to provide communication and surveillance services. During the ascent from sea-level to the mission altitude, the volume of the lifting gas may change significantly, which will result in the change of the center-of-buoyancy (CB). A general calculation method is developed to specify CB for the stratospheric airship with a double-ellipsoid hull and an arbitrary number of the gas cells. The cross-section-integral (CSI) method is used as a basic calculation scenario to specify CB. Considering the complexity in determining the boundary between the helium and air in the gas cell, a searching algorithm is put forward and the specification of CB can be conducted by the iterative calculation. As an important application, the stable condition of the pitch angle is analyzed when the change of CB is involved. Under different initial configurations, the stable pitch angle of the stratospheric airship during the ascent is specified and compared, which shows the advantages of the multi-gas-cell configuration. The results of this paper may provide an important reference for the engineering application of the stratospheric airship.     

基于LMS Virtual. Lab的系留气球仿真与优化

系留气球在近地面收放过程中存在俯仰角过大的问题，为了更全面地了解收放过程中不同因素对球体俯仰角的影响，采用LMS Virtua1. Lab建立了带滑轮索具系统的系留气球三维动力学模型进行仿真分析，结果表明，仿真结果与理论计算、测量数据都有较高的符合度。进而运用试验设计( DOE)方法，探索典型风速下球体俯仰角的响应区间。最后基于响应面模型的优化技术，对滑轮索具系统设计进行优化，有效改善了球体在收放过程中俯仰角过大的问题。仿真模型对系留气球系统设计及收放控制有一定的指导作用。     

平流层长航时气球轨迹控制系统研究

首先介绍了平流层气球的应用意义及进行轨迹控制的必要性,然后描述了一种基于不同海拔风速差的轨迹控制方法,简要说明了平流层风速随海拔的变化规律,在此基础上研究了包括超压气球和轨迹控制系统在内的气球飞行系统各部分特点,最后简单分析了整个飞行系统的建模与仿真中的要点问题。结果表明,这种轨迹控制方法是一种几乎不需要消耗能源的有效轨迹控制方法,具有较高的应用价值和推广价值。     

基于响应面近似技术的平流层飞艇协同设计优化

针对平流层飞艇多学科设计优化问题,引入协同优化算法,分析基于响应面近似模型的协同优化方法CO/RSA的执行步骤和特点,并介绍响应面近似模型的构建方法;建立平流层飞艇各学科模型,并对学科间耦合关系进行分析;运用建立的气动/推进、结构、能源三个耦合子系统的学科分析模型和系统优化模型,以平流层飞艇总质量最小为优化目标,综合考虑浮重、推阻和能源平衡,采用CO/RSA方法对平流层飞艇进行设计优化.结果表明:所建立的平流层飞艇的MDO模型是合理的,CO/RSA算法应用于飞艇总体设计优化是有效的,研究结果可为平流层飞艇方案论证和方案设计提供参考.     

高空气球太阳能电池标定用太阳跟踪控制技术

高空气球标定的太阳能电池是可被用于地面太阳模拟器和太阳光光强检测的标准电池。首先,给出了由飞行气球搭载的高空太阳能电池标定所使用的太阳跟踪控制系统设计方法,包括基于STM32的太阳跟踪控制系统硬件设计方案、混合自动追踪控制策略、软件开发与实现方法、高空跟踪控制技术问题解决方案以及高空标定试验等。同时,解决了高空气球电池标定用太阳跟踪控制系统在极端环境下高可靠性、连续追踪和防抖动等关键技术问题。试验结果为气球飞行高度32km,平飘时间超过2h,太阳跟踪偏差小于1°。经初步分析,高空太阳跟踪控制系统标定测试结果合理可靠,工作性能稳定,为中国高空气球太阳能电池AM0标定用太阳跟踪控制系统的研究提供了新思路。     

Balloon altitude studies of southern hemisphere hard X-ray sources by the Imperial College-University of Tasmania-INPE collaboration

Hard X-ray balloon altitude measurements with a 1600 cm² phoswich array are described. Data from observations on Sco X-1, GX1+4, GX5−1, Nova Oph. 1977, SMC X-1, SS433, IC 4329A and MR 2251-178 are presented. The role of Comptonisation in X-ray production for Sco X-1 and GX1+4 is discussed.     

A comprehensive numerical model investigating the thermal-dynamic performance of scientific balloon

The increase of balloon applications makes it necessary for a comprehensive understanding of the thermal and dynamic performance of scientific balloons. This paper proposed a novel numerical model to investigate the thermal and dynamic characteristics of scientific balloon in both ascending and floating conditions. The novel model consists of a dynamic model and thermal model, the dynamic model was solved numerically by a computer program developed with Matlab/Simulink to calculate the velocity and trajectory, the thermal model was solved by the Fluent program to find out the balloon film temperature distribution and inner Helium gas velocity and temperature field. These models were verified by comparing the numerical results with experimental data. Then the thermal and dynamic behavior of a scientific balloon in a real environment were simulated and discussed in details.     

一种用于主动流动控制的气泡型微致动器

 面向先进主动流动控制,在国内率先研发了一种基于微机电系统(MEMS)的气泡型微致动器阵列技术。分析了气泡型微致动器用于主动流动控制的原理,阐述了致动器结构及其加工工艺。通过对气泡样件的压力载荷 变形行为的测试,表明其具有较好的线性和较大承载能力。结合不同翼型的风洞试验表明,微致动器作动可以影响翼型表面的压强分布,从而可用于增升等控制目的。     

基于浮空器的新型应急通信监测系统

介绍了一种新型的机动式空中应急通信监测系统,该系统以机动式系留气球和小型遥控飞艇为空中平台,搭载各种通信、侦察、监测等电子设备,具有快速灵活、机动性强、费用低廉等特点,能够适应复杂环境,面对突发事件时可以快速布置到任何需要的地方。