排序方式: 共有42条查询结果,搜索用时 15 毫秒
1.
一种基于方钢管骨架的壁板成型模具 总被引:1,自引:0,他引:1
针对大型飞机机身复合材料壁板试验件,从模具的刚度要求、使用要求、成本要求等方面确定了模具设计边界条件;为了满足模具设计的边界条件要求,提出了一种基于方钢管骨架的壁板成型模具。在进行模具设计时,首先对比各种常用模具材料的优缺点并最终确定模具采用“INVAR”钢材料;然后介绍了模具的结构布局和结构尺寸参数,并通过有限元模拟的方法,对模具的整体刚度和起吊工况的强度进行了模拟计算。计算结果表明模具的整体刚度较好,能够满足设计要求。从模具整体刚度和模具重量两方面与框架式隔板模具对比,方钢管骨架的壁板成型模具具有更大的优势。 相似文献
2.
为保障在卫星与地面之间开展空间量子科学实验的条件,必须为科学实验载荷建立一条星—地高速数据双向传输链路.通过跟踪CCSDS-SLS-NGU(空间数据系统咨询委员会-空间链路业务-下一代上行链路)工作组对NGU的研究进展,结合科学实验卫星有效载荷建立高速上行链路的需求,采用高带宽利用率调制技术、高效信道编码方式及适用的链路数据传输协议,设计了一种传输速率为1Mbit/s、误码率优于1×10-9的高速上行链路方案,并给出星载设备实现方案和地面初步测试结果.该方案在技术体制上兼容已有CCSDS规范,便于地面站及星载接收机实现,完全满足开展空间量子科学实验的需要. 相似文献
3.
4.
5.
6.
仪器由AT89C55单片机进行控制,通过键盘、LCD显示模块进行人机对话,完成波形选择、频段选择,频率、幅度输出控制。由MAX038产生正弦波、方波、三角波,其波形选择由单片机进行控制;频段选择由五档组成,可通过旋扭开关完成;频率由单片机输出数据经D/A转换后控制MAX038;幅度由单片机输出数据经D/A转换后改变放大器负反馈深度来实现输出信号幅度的变化。 相似文献
7.
对大电流矩形镉镍电池进行了详细的失效模式与影响分析(FMEA),提出了相应的预防措施,对一南类电池的可靠性和维修性设计具有一定的帮助。 相似文献
8.
Zheng Li Peng Chen Naiquan Zheng Hang Liu 《Advances in Space Research (includes Cospar's Information Bulletin, Space Research Today)》2021,67(4):1317-1332
In recent years, with the continuous development of Global Navigation Satellite System (GNSS), it has been applied not only to navigation and positioning, but also to Earth surface environment monitoring. At present, when performing GNSS-IR (GNSS Interferometric Reflectometry) snow depth inversion, Lomb-Scargle Periodogram (LSP) spectrum analysis is mainly used to calculate the vertical height from the antenna phase center to the reflection surface. However, it has the problem of low identification of power spectrum analysis, which may lead to frequency leakage. Therefore, Fast Fourier Transform (FFT) spectrum analysis and Nonlinear Least Square Fitting (NLSF) are introduced to calculate the vertical height in this paper. The GNSS-IR snow depth inversion experiment is carried out by using the observation data of P351 station in PBO (Plate Boundary Observatory) network of the United States from 2013 to 2016. Three algorithms are used to invert the snow depth and compared with the actual snow depth provided by the station 490 in the SNOTEL network. The observations data of L1 and L2 bands are respectively used to find the optimal combination between different algorithms further to improve the accuracy of GNSS-IR snow depth inversion. For L1 band, different snow depths correspond to different optimal algorithms. When the snow depth is less than 0.8 m, the inversion accuracy of NLSF algorithm is the highest. When the snow depth is greater than 0.8 m, the inversion accuracy of FFT algorithm is higher. Therefore, according to the different snow depth, a combined algorithm of NLSF + FFT is proposed for GNSS-IR snow depth inversion. Compared with the traditional LSP algorithm, the inversion accuracy of the combined algorithm is improved by 10%. For L2 band data, the results show that the accuracy of snow depth inversion of various algorithms do not change with the variations of snow depth. Among the three single algorithms, the inversion accuracy of FFT algorithm is better than that of LSP and NLSF algorithms. 相似文献
9.
针对弹道再入目标轨迹跟踪问题,提出基于混合建议分布的平方根容积求积采样粒子滤波(HPD-SRCQSPF)算法,该算法以混合建议分布为框架,由两个基本建议分布组成。其中一个基本建议分布为先验分布,另一个基本建议分布为平方根容积求积卡尔曼滤波估计后的值。该混合建议分布与真实的后验分布很接近,因此有着高效性、高精度等特点。仿真结果表明,对于弹道再入目标轨迹跟踪模型,相比于标准粒子滤波(SPF)算法和平方根容积求积粒子滤波(SRCQPF)算法,HPD-SRCQSPF算法可以在较低运算负载的情况下获得更好的跟踪性能。特别是在弹道目标变轨机动的情况时,所提出算法的性能增益更为显著。 相似文献
10.