多道扫描探针系统在电弧风洞中的应用

介绍了一种用于诊断电弧风洞等离子体参数的多道扫描探针系统，使用该系统研究了ＦＤ０４风洞空流场的等离子体特性，利用ＣＴＷ理论分析了探针数据，实时给出了流场攻密度的空间分布。实验表明，空流场的电子温度分布基本是均匀的；电子密度分布与流场结构紧密相关，电子密度变化在３倍之内，随着流场结值的不同２，电子密度也随之变化。     

低轨航天器致空间等离子体尾流

建立起一个低轨道航天器引起的等离子体尾的二维计算机模式，结果表明：（１）尾流的宽度随表面负电位值的增加而变窄。（２）随离子马赫数增加尾流位垒变宽；（３）对正电位表面情况尾流近区有电子聚集，并且离子的放空更远。     

固体推进剂等离子体点火研究

为了研究等离子体对固体推进剂点火性能的影响，分别对双基药和硝胺药等两种固体推进剂，进行了等离子体点火实验。实验装置包括等离子体源、热电偶丝和动态信号分析仪。通过实验，获得了两种固体推进剂在不同的等离子体能量输入的条件下，其表面温度随时间变化的曲线。与常规点火数据相比，固体推进剂的等离子体点火延迟时间明显缩短。不同类型的固体推进剂，在相同的等离子体能量输入条件下，其点火性能不同；同一种类型的固体推进剂，在不同的等离子体能量输入条件下，其点火性能也不一样。     

The multifuid solar wind termination shock and its influence on the threedimensional plasma structure upstream and downstream

The solar wind termination shock is described as a multi-fluid phenomenon taking into account the magnetohydrodynamic self-interaction of a multispecies plasma consisting of solar wind ions, pick-up ions and shock-generated anomalous cosmic ray particles. The spatial diffusion of these high energy particles relative to the resulting, pressure-modified solar wind flow structure is described by a coupled system of differential equations describing mass-, momentum-, and energy-flow continuities for all plasma components. The energy loss due to escape of energetic particles (MeV) from the precursor into the inner heliosphere is taken into account. We determine the integrated properties of the anomalous cosmic ray gas and the low-energy solar wind. Also the variation of the compression ratio of the shock structure is quantitatively determined and is related to the pick-up ion energization efficiency and to the mean energy of the downstream anomalous cosmic ray particles. The variation of the resulting shock structure and of the solar wind sheath plasma extent beyond the shock is discussed with respect to its consequences for the LISM neutral gas filtration and the threedimensional shape of the heliosphere.     

余辉等离子体的实验研究

利用调制脉冲产生的余辉等离子体的参数测量表明:等离子体空间电位和电子温度的衰变是重要的,它在余辉等离子体的密度衰变过程研究中必须予以考虑.对容器中余辉等离子体密度径向分布的测量结果与理论预言是一致的.     

Spectroscopy peculiarities of thermal plasma of electric arc discharge between electrodes with Zn admixtures

Plasma of the free burning electric arc between Ag–SnO₂–ZnO composite electrodes as well as brass electrodes were investigated. The plasma temperature distributions were obtained by Boltzmann plot method involving Cu I, Ag I or Zn I spectral line emissions. The electron density distributions were obtained from the width and from absolute intensity of spectral lines. The laser absorption spectroscopy was used for measurement of copper atom concentration in plasma. Plasma equilibrium composition was calculated using two independent groups of experimental values (temperature and copper atom concentration, temperature and electron density). It was found that plasma of the free burning electric arc between brass electrodes is in local thermodynamical equilibrium. The experimental verification of the spectroscopic data of Zn I spectral lines was carried out.     

Experimental study on plasma jet deflection and energy extraction with MHD control

This paper presents an integrated research scheme for vector deflection and energy extraction in a gas plasma jet under Magneto-Hydrodynamic (MHD) control. A MHD-controlled thrust-vector test rig was used to conduct the experimental research. A gas plasma was obtained by injecting ionization seeds of Cs₂CO₃ into the combustion chamber via artificially forced ionization. The effects of the gas temperature and ionization seed mass fraction on the plasma jet deflection and energy extraction were experimentally verified under an applied magnetic field. The experimental results were analyzed theoretically. The results showed that the deflection amplitude of the gas plasma jet and the extracted voltage signal intensity increased with increasing gas temperature and the ionization seed mass fraction. The extracted dynamic voltage signals proved that the ionization seeds of Cs₂CO₃ induced gas ionization at 1173 K. The experiment verified that it is feasible to simultaneously achieve jet deflection and extract energy under the action of an external magnetic field.     

预燃式等离子体射流点火器工作特性实验研究

为解决发动机点火包线小于飞行包线的实际问题,提供等离子体点火技术在航空发动机中的工程应用新思路,论文设计了一种预燃式等离子体射流点火器,实验研究了放电特性和射流特性。结果表明,预燃式等离子体射流点火器与空气等离子体射流点火器相比,在提升射流能量降低电源功率方面有着较大的优势,电流相同时通入甲烷在较大流量时可减小驱动电源功率,总流量为44L/min时,减幅可达14.99%;同时预燃式等离子体射流较空气等离子体射流稳定,且射流长度增加,扩大了点火面积,有利于点火。     

微波等离子推进器性能预示的工程算法

对微波等离子推进器提出一种快速性能预估的工程算法。假设谐振腔内的工质参数均匀、气体与微波之间的能量耦合良好、喷管内流动为一维管流,利用等离子体的等温模型可以快速地对微波等离子推进器性能进行估算。采用可变节点划分方法处理喷管流场,避免了喉部奇点。计算给出一系列不同输入微波功率、工质流量及放电管内压强条件下合理的发动机性能参数。     

电弧喷射器流场模拟中电场计算的多重网格法

在建立电弧喷射器内等离子体流场电场计算模型以及基本算法基础上,研究了采用多重网格对收敛速度的改进效果。数值计算证实了此方法的有效性尤其对流场电场耦合计算是有利的。