捷联式移动平台重力仪地面测试结果

自主研制移动平台重力仪对我国矿产资源勘探及测绘等领域具有重要意义。研制了一种基于激光捷联惯导的移动平台重力仪,根据移动平台重力测量应用需求及激光捷联惯导系统特点,采用高精度石英挠性加速度计作为重力测量传感器,安装于系统垂向通道,既可作为导航用垂向加速度计,又用于实现标量重力测量。介绍了工程样机系统的组成。利用重力场随高度升高衰减的原理,以相邻楼层间的重力测量差值评价了系统的静态精度;通过地面跑车试验,获得了系统动态测量内符合精度。     

激光捷联惯导车载重力测量试验

惯性导航系统中加速度计测量的比力是载体运动加速度与重力加速度的矢量和,当载体运动加速度能够被有效分离时,满足一定精度水平的惯性导航系统就可以成为动态重力仪。捷联式惯性导航系统体积小、重量轻、系统组成简单,可以在记录下惯性器件原始输出信息之后,通过离线处理过程进行数据处理和精度挖掘。本文通过对某高精度激光捷联惯导进行相应的软硬件更改,获得了兼具导航及重力测量功能的一体式动态重力仪。地面车载试验是验证动态重力仪的测量精度的有效手段之一,本文将一组高速公路重复测线的数据进行了处理和分析,结果表明在平均车速72km/hr的条件下,半波长分辨率2km,自由空间重力异常内符合精度优于1mGal。     

Kalman filtering for GPS/magnetometer integrated navigation system

This paper investigated the data processing method for a GPS/IMU/magnetometer integrated system with Kalman filtering (KF). As a result of GPS/IMU/magnetometer land vehicle system, dead-reckoning of magnetometer and accelerometer integrated subsystem bridged very well the GPS signal outage due to the trees on the two sides of the road. Both differential GPS data processing method and the carrier-phase method with magnetometers’ outputs for predicting the car position, velocity, and acceleration (PVA) are presented. The results from DGPS with Kinematical Positioning (KINPOS) software shown that the averages of the north, east, and down direction standard deviation (short for “std”) are 0.014, 0.010, and 0.018 m, respectively. The std of velocities and accelerations derived by the position and velocity differentiation are 10, 7, 13 mm/s, 7, 5, 9 mm/s², respectively. This method for getting velocities and accelerations requires higher accurate position coordinates. But the position accuracy has frequently been degraded in this case when the car drove under the trees or other similar kinematical environments. That caused the larger velocity and acceleration errors. While the results from the carrier-phase method are std of the velocities = 2.1 mm/s, 1.3 mm/s, 3.7 mm/s in north, east, down, and std of the accelerations = 1.5 mm/s², 0.9 mm/s², 2.3 mm/s² for the static test period; as compared with KINPOS software results, std of the velocity difference between the carrier-phase method and the DGPS method = 7 mm/s, 6.9 mm/s, 9.7 mm/s in north, east, down direction, and std of acceleration difference = 5.0 mm/s², 4.5 mm/s², 7.5 mm/s² in north, east, down direction for the kinematical test period. Obviously, errors come from both the carrier-phase method and DGPS velocity and acceleration results derived directly by the position differentiation. In addition, better accuracy of positions than that before KF has been got by means of velocities and accelerations derived by the carrier-phase method after KF.     

某型无人机自动着陆系统研究

论述了用ＤＧＰＳ／ＳＩＮＳ／ＲＡ组合导航系统引导的某无人机自动着陆系统的总体方案，利用该无人机的小扰动线性化方程，对其轨迹控制系统进行了分析设计。在不采用速度控制系统的情况下，利用该无人机的全量微分方程，对其在各种起始状态及各种干扰下的自动着陆过程进行了仿真。仿真结果表明，着陆性能符合要求。     

SINS/DGPS/Magnetometer组合导航研究

本文针对SINS/DGPS/Magnetometer全组合系统进行了研究,建立了相应的误差模型和系统观测模型。应用扩展卡尔曼滤波算法将GPS测量方程和SINS动态线性化,进行SINS验前状态估计及其误差协方差时间更新。仿真结果表明:本文提出的组合导航系统能够给出载体的高精度姿态信息,位置误差和速度误差也较小。     

基于增强型DGPS高精度星间相对定位的样条方法

用传统的差分GPS（DGPS）方法确定分布式SAR的星间相对位置，可能存在：（1）卫星的高速运动可能导致GPS接收信号的信噪比过低，进而造成可用信号数目无法达到正常解算的要求；（2）传统状态估计方法的精度不能满足要求。为解决上述问题，提出了一种基于增强型DGPS的相对定位样条方法，即在GPS测量的基础上，增加星间伪距测量，并结合待估参数的连续特性，建立了相对定位的样条模型，最后利用最小二乘进行参数估计。仿真结果表明：该方法的相对定位精度比相对传统方法大约提高了3倍。最后的理论分析验证了仿真的正确性。     

飞行校验系统GPS/DGPS定位及排故分析

飞行校验对保证各类导航设备的精度符合性至关重要,完成飞行校验的核心部件是机载飞行校验系统,其中的飞机实时定位分系统对校验结果产生重要影响。本文对当前校验系统中较常用的定位手段及故障隔离案例进行分析。     

Accuracy and coverage of the modernized Polish Maritime differential GPS system

The DGPS navigation service augments The NAVSTAR Global Positioning System by providing localized pseudorange correction factors and ancillary information which are broadcast over selected marine reference stations. The DGPS service position and integrity information satisfy requirements in coastal navigation and hydrographic surveys. Polish Maritime DGPS system has been established in 1994 and modernized (in 2009) to meet the requirements set out in IMO resolution for a future GNSS, but also to preserve backward signal compatibility of user equipment. Having finalized installation of the new technology L1, L2 reference equipment performance tests were performed.     

地空靶场实时GPS伪距差分测量系统的应用研究

地空靶场实时GPS差分高精度测量系统是当代飞机飞行试验中解决火控系统标校、测控系统校飞或导弹武器系统精度试验等问题的有效手段,是地空靶场测控系统的重要组成部分。本文基于伪距观测量的GPS实时差分定位的原理以及对数学模型的分析,论述了将GPS实时定位技术应用于地空靶场中机载或弹载导航系统的实现方法。文中详细的规划了基准站...     

基于DGPS/SINS的航空重力测量中的杆臂效应误差分析

基于DGPS/SINS的航空重力测量系统由于GPS天线和SINS部分安装位置的不同会产生杆臂效应误差,据此推导了杆臂效应误差计算公式,设计了用于数据处理的FIR低通滤波器,根据某次航空重力实验数据,计算了产生的空间位置、速度和加速度误差。结果表明因杆臂效应产生的加速度误差在实际应用中应该考虑到。