航空发动机过失速及退喘模型研究

针对涡喷和涡扇发动机,通过求解带源项的2维欧拉方程组,发展了模拟发动机整机过失速及退喘动态过程的理论模型,实现了2种发动机稳定状态-喘振/旋转失速-退喘动态过程的模拟。分析了某单轴涡喷发动机算例,模拟结果展现出喘振和旋转失速相应的基本特征;对某小涵道比双轴混排涡扇发动机进、退喘模拟结果进行分析,发现风扇与压气机均发生了喘振,且喘振频率相等,并最终都恢复至稳定状态。     

翼型动态失速气动力二次峰值数值模拟研究

为揭示翼型动态失速状态下气动力二次峰值的发生机理,基于运动嵌套网格技术、有限体积方法、LU-SGS隐式格式和Roe-MUSCL格式建立了俯仰振荡翼型非定常流场的数值模拟方法。首先,基于所建立的数值方法对NACA0012翼型在深度动态失速状态下的气动特性进行模拟,计算结果与试验数据吻合良好,验证了数值模拟方法的准确性。然后,通过对NACA0012翼型动态失速状态流场的研究,揭示了气动力二次峰值的发生机理。最后,开展了翼型厚度、弯度和弯度位置等外形参数对气动力二次峰值的影响研究。结果表明,动态失速涡诱导形成的后缘涡是导致气动力二次峰值的关键因素;翼型外形参数的变化会引起动态失速过程中动态失速涡和后缘涡的变化,使得气动力二次峰值相对谷值的增量有规律地增加或减小,二次峰值位置有规律地前移或后移。     

Reconfigurable Flight Control Design for Combat Flying Wing with Multiple Control Surfaces

With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures(lock-in-place(LIP),loss-of-effectiveness(LOE) and float),flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.     

A Structured Mesh Euler and Interactive Boundary Layer Method for Wing/Body Configurations

To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.     

Lift coefficient prediction at high angle of attack using recurrent neural network

In this paper, identification of dynamic stall effect of rotor blade is considered. Recurrent Neural Networks have the ability to identify the nonlinear dynamical systems from training data. This paper describes the use of recurrent neural networks for predicting the coefficient of lift (C_Z) at high angle of attack. In our approach, the coefficient of lift (C_Z) obtained from the experimental results (wind tunnel data) at different mean angle of attack θ_mean is used to train the recurrent neural network. Then the recurrent neural network prediction is compared with experimental ONERA OA212 airfoil data. The time and space complexity required to predict C_Z in the proposed method is less and it is easy to incorporate in any commercially available rotor code.     

大后掠机翼翼尖导弹动力响应空测与数据分析

 <正> 大后掠机翼翼尖挂导弹对外界干扰的动力响应很灵敏,这种干扰主要来自随机不稳定气流或各种突加载荷。为保证安全和防止导弹失控,摸清其响应值非常必要;除理论计算外,对可能遇到的不平稳气流和突加载荷在翼尖导弹上的动力响应进行了空测,并用频谱分析和功率谱密度分析处理了空测数据,制订了翼尖导弹振动与冲击试验谱,进行了地面试验与空中打靶试验,获得了满意结果。     

Flow separation control on swept wing with nanosecond pulse driven DBD plasma actuators

A 15° swept wing with dielectric barrier discharge plasma actuator is designed.Experimental study of flow separation control with nanosecond pulsed plasma actuation is performed at flow velocity up to 40 m/s. The effects of the actuation frequency and voltage on the aerodynamic performance of the swept wing are evaluated by the balanced force and pressure measurements in the wind tunnel. At last, the performances on separation flow control of the three types of actuators with plane and saw-toothed exposed electrodes are compared. The optimal actuation frequency for the flow separation control on the swept wing is detected, namely the reduced frequency is 0.775, which is different from 2-D airfoil separation control. There exists a threshold voltage for the low swept wing flow control. Before the threshold voltage, as the actuation voltage increases, the control effects become better. The maximum lift is increased by 23.1% with the drag decreased by 22.4% at 14°, compared with the base line. However, the best effects are obtained on actuator with plane exposed electrode in the low-speed experiment and the abilities of saw-toothed actuators are expected to be verified under high-speed conditions.     

一种折叠弹翼悬挂物的分离轨迹试验技术

提出了一种新的折叠弹翼悬挂物机弹分离轨迹试验技术,重点解决了在机弹分离过程中折叠弹翼动态展开时悬挂物的气动力获取问题。研究表明,提出的试验技术通过将悬挂物气动力修正方法引入到悬挂物分离安全性研究当中,准确地得到悬挂物的分离特性,解决了折叠弹翼悬挂物分离轨迹风洞试验技术瓶颈,为折叠弹翼悬挂物的投放分离安全性提供一套工程实用的解决方案。     

基于ANSYS的机翼动力学分析

针对无人机在挂载导弹飞行和发射导弹时,无人机机翼由于受到多种载荷影响所产生的应力应变,应用ANSYS软件动力学分析,计算模拟了机翼在受到多种载荷影响时所产生的应力分布和应变量。分析结果表明,由于外挂物重量和机翼周围气动流场的影响,机翼会产生不同程度的颤振和扭转,其研究结果对合理设计机翼结构具有一定的参考意义。     

浅析俄罗斯战斗机CY—37“金雕”前掠翼三翼面气动布局的先进性

本文追溯了前掠翼的飞机的渊源。指出常规二翼面的后掠翼，变后翼和近矩耦合鸭式气动布局存在着妨碍机动进一步提高的缺点。