基于PSO算法的直接驱动阀用音圈电机优化设计

音圈电机(VCM,Voice Coil Motor)直接驱动伺服阀(DDV, Direct Drive Valve)采用VCM直接驱动滑阀阀芯,VCM的性能对DDV整体性能起决定性作用.由于VCM的几何设计参数对性能提升存在相互矛盾,需要在允许的参数空间内寻找一组最优的参数,往往需要设计者试凑多次.在介绍VCM原理和结构的基础上,分析了各设计参数对性能的影响.定义了针对DDV应用需求的VCM优化目标函数,应用变惯性权值和带收敛因子的改进粒子群优化(PSO, Particle Swarm Optimization)算法在设计约束的多维参数空间内进行VCM优化,得到满足设计约束的最优设计参数,表明PSO算法在类似应用中具有较强工程应用价值.      

双独立闭环复合液压伺服控制体系的分析

针对现有几种液压伺服控制系统的优缺点,基于高性能和节能这一发展趋势,提出基于伺服电机、定量泵、蓄能器和伺服阀的双独立闭环的新型复合控制体系.分析了其结构特点,建立了数学模型并进行了仿真分析和实验验证,证明新型控制体系充分发挥了各个控制环节的效能,实现了流量适应,较现有的控制方案简单可靠,在综合指标方面有了很大的提高,适合机载液压系统和弹载液压系统.      

基于遗传算法的双余度无刷直流电机优化设计

针对航空电作动系统用双余度无刷直流电机的方案寻优问题,提出了一种基于遗传算法的优化设计方法.通过分析航空作动系统的特点和性能要求得出电机优化设计的目标函数和约束条件.建立电机的电磁和热路模型,得到目标函数和约束条件的解析方程.其中,在电磁模型的建立过程中,采用解析方法得到气隙磁密和反电势系数表达式;在热路模型的建立过程中,采用Bertotti分立铁耗法计算铁心损耗,并利用热路法求解电机各部分的温升.通过遗传算法对电机重量全局寻优.计算结果表明:在满足性能要求的前提下,优化设计方案合理,电机重量减小了13.3%,验证了该优化设计和建模方法的有效性.      

长期贮存固体火箭发动机安全性评估

为评估长期贮存后固体火箭发动机安全性的变化,对贮存时间为18年的某型固体火箭发动机进行了解剖.测试并比较了经过长期贮存后发动机药柱的力学性能和各种感度,而后进行了长期贮存后推进剂和发动机试件的枪击试验,各种试验项目中均利用贮存期为4年的推进剂方坯进行对比.结果表明:长期贮存后推进剂热安全特性变化不明显,但撞击感度和摩擦感度明显增加并且在枪弹高速冲击下破碎严重,长期贮存后发动机在模拟枪击试验中表现出爆炸倾向,使用安全性大大降低.      

Universal scaling laws for fully-developed magnetic field turbulence near and far upstream of the Earth’s bow shock

We analyze the multifractal scaling of the modulus of the interplanetary magnetic field near and far upstream of the Earth’s bow shock, measured by Cluster and ACE, respectively, from 1 to 3 February 2002. The maximum order of the structure function is carefully estimated for each time series using two different techniques, to ensure the validity of our high-order statistics. The first technique consists of plotting the integrand of the pth order structure function, and the second technique is a quantitative method which relies on the power-law scaling of the extreme events. We compare the scaling exponents computed from the structure functions of magnetic field differences with the predictions obtained by the She–Lévêque model of intermittency in anisotropic magnetohydrodynamic turbulence. Our results show a good agreement between the model and the observations near and far upstream of the Earth’s bow shock, rendering support for the modelling of universal scaling laws based on the Kolmogorov phenomenology in the presence of sheet-like dissipative structures.     

Periodic Variations of Drag Coefficient for the ANDE Spherical Satellites During its Lifetime

A drag coefficient (C_D) inversion method is introduced to study the variations of the drag coefficient for orbital satellites with spherical geometry. Drag coefficients of the four micro satellites in the Atmospheric Neutral Density Experiment (ANDE) are compiled out with this new method. The Lomb-Scargle Periodgram (LSP) analysis of the four ANDE satellites' C_D series has shown that there are obvious 5, 7, 9, and 27 days' period in those data. Interesting results are found through comparing the LSP analysis with series of the daily solar radio flux at 10.7 cm (F_10.7 index), the Ap index, and the daily averaged solar wind speed at 1AU. All series in the same time interval have an obvious period of about 27 days, which has already been explained as the association with the 27 days' solar rotation. The oscillating periods less than 27 days are found in series of C_D, Ap and solar wind speed at 1AU, e.g., the 5, 7, 9 days period. However, these short periods disappeared in the time series of F_10.7 index. The same periodicities of 5, 7, 9 days in Ap and solar wind are presented at the same time interval during the declining phase of solar cycle 23. While in the ascending phase of solar cycle 24, these short oscillations are not so obvious as that in the declining phase of solar cycle 23. These results provide definite evidence that the C_D variations with period of 5, 7 and 9 days are produced by a combination of space weather effects caused by the solar wind and geomagnetic activity.      

带多孔板的APU进气系统气动性能实验

利用实验方法对一类带多孔板的辅助动力装置(APU)进气系统气动性能进行了研究.实验结果表明:两出口的总压恢复系数和总压畸变指数均随流量的增加不断降低.总压恢复系数在定总流量时略微下降,在定配比时几乎线性下降.总压畸变在周向上主要受多孔板无孔区影响,径向上主要受流道曲率影响.随开孔率增加,总压恢复系数不断增加.动力端不同开孔率下,总压畸变以径向畸变为主,负载端在小开孔率时以周向畸变为主,大开孔率时径向畸变成为主要因素.      

高温磁悬浮轴承励磁绕组制造技术

针对国内外高温励磁绕组存在的缺陷与不足,提出了一种新型的迷宫形励磁绕组结构,首先通过电火花线切割制造出单层迷宫形线圈,并在线圈匝间和层间充分均匀地填充耐高温绝缘材料;然后通过真空钎焊工艺实现多层迷宫形线圈的牢固焊接,最后将焊接成型的多层线圈封装成迷宫形绕组,并应用于单自由度高温磁悬浮轴承试验台中,实现了550℃被悬浮物体近20h的稳定悬浮.研究结果表明:线圈焊缝的高温电阻值小,抗剪切强度满足要求,焊缝的金相组织致密均匀;绕组匝间和层间绝缘性能良好;迷宫形励磁绕组在原理和工艺上是可行的.对高温悬浮试验后的迷宫形绕组内部形貌进行观察后发现封装线圈的高温绝缘材料存在一定的缺陷,有待进一步研究.      

飞机机载电源与其负载适配性研究

随着新一代飞机的电源容量和机载用电设备的大幅增加,机载电源和用电设备的适配性问题越来越重要．新的国际机载电源标准ISO1540强调机载电源和用电设备必须同时达到规定要求．以实现飞机供电系统的安全可靠运行。对机载电源和用电设备的特性要求进行分析研究,为机载电源和用电设备的设计和维修提供参考。     

翼型测力天平的研制

为研究翼型结冰状态下的载荷变化规律,对翼型进行测力实验.研制一台三分量翼型测力天平.天平设计的突出难点为设计载荷极不匹配,阻力测量载荷很小.设计时,针对翼型载荷的特点,采用片梁组合方式测量阻力,四柱梁测量法向力及俯仰力矩,并采用有限元方法对结构进行了验证计算.主要介绍天平的设计、校准及应用情况.