柔性-刚性混合翼微型飞行器气动特性研究

提出了一种将柔性翼和刚性翼相结合的柔性-刚性混合翼微型飞行器新概念布局型式，通过与刚性翼微型飞行器的风洞对比试验研究了该新概念布局的气动特性。在此基础上，进行了柔性-刚性混合翼微型飞行器试验原理样机的飞行试验验证。风洞试验和飞行试验研究结果表明：柔性-刚性混合翼微型飞行器的新概念布局是可行的；与刚性翼微型飞行器相比而言，柔性-刚性混合翼微型飞行器具有更好的气动特性，对解决微型飞行器抗风稳定飞行问题是有效的。     

隐身外形飞行器用埋入式进气道的设计与风洞实验研究

本文为隐身外形飞行器用埋入式进气道发展了一套设计方法。该方法的理论基础是埋入式进气道进气机理和气动S弯概念,其关键技术包含通道中心线设计、横截面面积变化规律设计以及横截面形状设计等,各技术可以方便地用数学方法加以描述,整个方法易于编程实现。并结合一种隐身外形无人机提出了埋入式进气道方案,通过实验得到了此类隐身外形飞行器用埋入式进气道的气动特性。结果表明,所提出的埋入式进气道方案可行,所设计的模型进气道性能良好,所发展的设计方法合理。同时验证了埋入式进气道进气机理的正确性,也表明隐身外形飞行器与埋入式进气道的组合方案具有十分光明的应用前景。     

基于虚拟目标点制导的误差分析

基于标准弹道确定的虚拟目标点位置在弹道小扰动的情况下能够确保闭路制导的精度,但是在弹道大扰动时,虚拟目标点位置修正误差变大,能否保证闭路制导的精度值得探讨。通过给弹道一个大扰动进行了弹道仿真,结果表明,弹道大扰动会引起闭路制导的方法误差变大。     

加油机尾流场建模与仿真分析

提出了等效气动效应法,建立了加油机尾流场的等效扰动模型。等效气动效应法采用逐点积分方法和加权平均方法,将尾流的影响等效为受油机运动方程直接可用的平均风速度和风梯度。对不同状态下受油机所受尾流的扰动作用进行了仿真。结果表明,扰动模型与实际情况比较符合。     

The Genesis Solar Wind Concentrator Target: Mass Fractionation Characterised by Neon Isotopes

The concentrator on Genesis provided samples of increased fluences of solar wind ions for precise determination of the oxygen isotopic composition. The concentration process caused mass fractionation as a function of the radial target position. This fractionation was measured using Ne released by UV laser ablation and compared with modelled Ne data, obtained from ion-trajectory simulations. Measured data show that the concentrator performed as expected and indicate a radially symmetric concentration process. Measured concentration factors are up to ∼30 at the target centre. The total range of isotopic fractionation along the target radius is 3.8%/amu, with monotonically decreasing ²⁰Ne/²²Ne towards the centre, which differs from model predictions. We discuss potential reasons and propose future attempts to overcome these disagreements.     

Galactic Wind: Mass Fractionation and Cosmic Ray Acceleration

The dynamical and chemical effects of the Galactic Wind are discussed. This wind is primarily driven by the pressure gradient of the Cosmic Rays. Assuming the latter to be accelerated in the Supernova Remnants of the disk which at the same time produce the Hot Interstellar Medium, it is argued that the gas removed by the wind is enriched in the nucleosynthesis products of Supernova explosions. Therefore the moderate mass loss through this wind should still be able to remove a substantial amount of metals, opening the way for stars to produce more metals than observed in the disk, by e.g. assuming a Salpeter-type stellar initial mass function beyond a few Solar masses. The wind also allows a global, physically appealing interpretation of Cosmic Ray propagation and escape from the Galaxy. In addition the spiral structure of the disk induces periodic pressure waves in the expanding wind that become a sawtooth shock wave train at large distances which can re-accelerate “knee” particles coming from the disk sources. This new Galactic Cosmic Ray component can reach energies of a few×10¹⁸ eV and may contribute to the juncture between the particles of Galactic and extragalactic origin in the observed overall Cosmic Ray spectrum.     

三维舵面绕流的N-S方程计算研究

基于粘性非结构混合网格,采用格心格式的有限体积法,应用Spalart-Allmaras湍流模型进行绕三维舵面流动的N-S方程数值模拟。操纵面铰链力矩的计算结果与风洞试验结果的对比分析表明,计算方法对粘性流动具有良好的适应性。对舵面铰链力矩随迎角、马赫数、雷诺数变化的规律也进行了分析研究。     

考虑系统扰动的永磁同步电机复合控制策略

提出一种结合滑模速度控制和扩展滑模扰动观测器的永磁同步电机复合控制策略。滑模速度控制采用新型趋近律设计,扩展滑模扰动观测器对系统内部参数摄动以及外部负载干扰进行准确估计。所设计的复合控制器通过系统扰动估计环节对控制系统中的综合扰动项进行实时估计,用以对速度控制环节进行前馈补偿,实现控制系统自抗扰控制。试验结果验证了所提出控制策略的有效性和可行性。     

风电及高压电机用绝缘浸渍漆选型试验研究

选取国内常用的两种树脂与环氧酸酐浸渍树脂作对比测试。通过对树脂常规性能及浸渍模拟线圈电性能测试,得出结论:1号树脂具有较好的储存稳定性,电性能与环氧酸酐相当,可作为环氧酸酐的替代品。