不确定参数结构特征值问题的概率统计方法和区间分析方法的比较

 基于区间数学理论、灵敏度分析理论、Kronecker代数理论,应用Taylor级数展开、概率摄动技术,提出了具有不确定参数结构的特征值问题的区间分析方法。结合工程实例与传统的概率分析方法进行比较,给出了两种方法的数值解法及各自解法的Kronecker代数形式。数值算例的结果显示了区间分析方法在具有不确定参数结构特征值问题分析中的价值和有效性。     

铝合金T型材拉弯成形的有限元模拟

针对目前拉弯成形中的问题,采用有限元模拟的方法,对带下陷拉弯过程进行计算机仿真,得到优化后的工艺参数,避免了盲目的试拉,提高了加工效率,降低了拉弯成本,积累了带下陷拉弯成形的经验,提高了公司拉弯工艺水平。     

某起落架正常收／放系统失效原因分析

正确运用246雷达天线“正常或应急”液压操纵开关和液压马达壳体回油“正常或应急”开关的工作状态，关系到飞机液压操纵系统的安全性。若天线液压操纵开关和马达壳体回油开关配合不当，将引起飞机液压操纵系统失效。     

发动机零部件稳态应力计算的状态函数法

借鉴发动机气动参数相似准则的基本思想, 提出了根据典型工作点的应力结果直接推算出其它状态点的状态函数法.利用该方法可以快速计算发动机任意状态点的稳态应力、位移、温度, 可以便捷地为构件寿命预估提供应力谱, 使发动机零部件寿命计算过程大大简化.该方法在发动机零部件寿命预估和管理等方面有较高的实用价值.      

通用航空机队设备可靠性动态识别模型

通用航空机队设备可靠性是通航单位安全运行的前提条件,是影响运营单位经济效益的重要因素之一。根据通航单位机队设备可靠性数据统计、分析及实际使用情况,采用ATA100章节名称作为指标源。综合可变模糊识别方法和权重阶梯朴素贝叶斯分类器模型的优势,构建了通用航空机队设备可靠性动态识别模型。为了避免主观给定指标权重导致的不合理,应用熵权法客观获取指标权重。最后利用实例测试样本验证了权重阶梯朴素贝叶斯分类器的合理性,并基于该方法对待识别样本进行了可靠性状态识别。实例分析表明：基于权重阶梯朴素贝叶斯分类器的通用航空机队设备可靠性状态识别模型具有较强的可行性和合理性,为通用航空机队设备可靠性状态提供了一种科学的识别方法。     

Effects of yaw-roll coupling ratio on lateral-directional aerodynamic characteristics

Experimental investigation of large amplitude yaw-roll coupled oscillations was conducted in a low-speed wind tunnel using an aircraft configuration model. A special test rig was designed and constructed to provide different coupled motions from low to high angles of attack.A parameter ‘‘coupling ratio" was introduced to indicate the extent of yaw-roll coupling. At each pitch angle, seven coupling ratios were designed to study the yaw-roll coupling effects on the lateraldirectional aerodynamic characteristics systematically. At high angles of attack, the damping characteristics of yawing and rolling moments drastically varied with coupling ratios. In the coupled motions with the rotation taking place about the wind axis, the lateral-directional aerodynamic moments exhibited unsteady characteristics and were different from the ‘‘quasi-steady" results of the rotary balance tests. The calculated results of the traditional aerodynamic derivative method were also compared with the experimental data. At low and very high angles of attack, the aerodynamic derivative method was applicative. However, within a wide range of angles of attack, the calculated results of aerodynamic derivative method were inconsistent with the experimental data, due to the drastic changes of damping characteristics of lateral-directional aerodynamic moments with yaw-roll coupling ratios.     

基于SE模块改进Xception的动物种类识别

Xception是Inception网络的一种极端化表现,在与Inception v3参数相近的情况下,它能够达到更高的准确度。由于神经网络提取的特征不一定都是有用特征,因此以Xception为基础,将SE(Squeeze and Excitation）模块加入该网络,调整特征通道的权重,使得网络的精确度得到提高。通过实验,融合SE模块的Xception网络训练精确度分别在Oxford-IIIT Pet数据集和CUB_200_2011数据集上提升了1%~1.7%和0.8%~1%,证明了SE模块能够进一步提升Xception的精确度。将改进后的Xception应用到动物种类识别中,根据精确度曲线对实验策略调整改进,最终在测试集上获得95.63%的识别率。     

Design and analysis of a truss deployable antenna mechanism based on a 3UU-3URU unit

Space deployable structures with large calibers, high accuracy, and large folding ratios are indispensable equipment in the aerospace field. Given that the single-DOF 3RR-3RRR deployable unit cannot be fully folded, this study proposes a 3UU-3URU deployable unit with two kinds of DOF: folding movement and orientation adjustment. First, based on the G-K formula, the DOF of the 3UU-3URU unit is analyzed. Then, the 3UU-3URU unit is used to construct a deployable truss antenna with a curved surface, and the DOF of the whole deployable antenna containing multiple 3UU-3URU units is calculated. The structural design of a deployable antenna with two loops is carried out with specific parameters and geometric relations. Next, a DOF simulation of a basic combination unit composed of three 3UU-3URU units is performed. Finally, a prototype of the basic combination unit is manufactured, and the DOF of the mechanism is experimentally verified.     

A novel approach for predicting inlet pressure of aircraft hydraulic pumps under transient conditions

Cavitation caused by insufficient suction is a major factor that influences the life of aircraft pumps. Currently, pressurizing the tank can solve the cavitation problem under steady large-flow conditions. However, this method is not always effective under transient conditions (from zero flow to full flow in a very short time). Moreover, to apply and design other measures, such as a boost impeller, the suction dynamics during the transient period must be investigated. In this paper, a novel approach based on the pressure wave propagation theory is proposed for predicting the inlet pressure of an aircraft pump under transient conditions. First, a dynamic model of a typical aircraft pump is established in the form of differential equations. Then, the transient flow model of the inlet line is described using momentum and continuity equations, and the governing equations are discretized by the method of characteristics and the finite difference method. The simulated results are in good agreement with the results from verification tests. Further simulation analysis indicates that the wave velocity and transient time may influence the inlet and reservoir pressure as well as the size of the inlet line. Finally, solutions for upgrading the inlet pressure are discussed. These solutions provide guidelines for designing inlet installations.     

关于大容量高速立式电机加装大转动惯量飞轮的设计研究

电机在发生事故突然失电时,为确保系统安全,要求电机能拖动设备依靠自身惯量,继续运转2 min。由于电机自身惯量远小于系统惯量要求,因此需在电机本体上加装大直径、大重量飞轮,以提供足够的惯量。在大容量、高速立式电动机加装大转动惯量飞轮后,电机的稳定运行变得至关重要,因此对电机自身的刚度、轴系及结构设计的合理性需进行验证。针对电机的关键点结构设计及计算,并通过现场运行,对电机的可靠性进行了验证。这为电机的工程运用提供参考。