子波变换在实验流体力学中的应用

介绍了子波分析的历史、基本知识以及在实验流体力学方面的应用。讨论了子波变换在客观辨识湍流边界层相干结构方面的应用。作者用子波变换的方法提出了确定湍流边界层相干结构挥发时间尺度的能量最大准则，提取了相干结构对应的速度信号波形。用于波变换研究了湍流边界层脉动速度信号的局部奇异性行为，发现相干结构发生处脉动速度信号的局部奇异性指数为负值。     

激波过弯道绕双圆柱流场

采用单曝光光栅干涉或双曝光光栅干涉，研究激波过弯道绕双圆柱传播的微波流场。采用单曝光法，成功显示入射激波到第一圆柱上的反射、绕射，到达第二圆柱上的反射、绕射。在同一底片上采用双次曝光，第一次脉冲记录直道上的平面波，第二次脉冲记录激渡过弯道绕双圆柱流场。这些照片对于研究反射、绕射及它们边界的相互作用是很有用的。     

GRECO中棱边绕射场计算的改进

图形电磁计算 (GRECO)方法是计算复杂目标高频区雷达散射截面 (RCS)的有效方法之一。分析了原始GRECO方法在判定目标图象棱边象素的不足之处 ,给出了相应的改进措施。改进后的软件能够更准确、充分地判定目标的棱边象素及获得棱边参数。在边缘绕射场的计算方面 ,指出了相关文献中存在的错误 ,给出了基于等效电磁流法 (MEC)和物理绕射理论 (PTD)的边缘绕射场计算式 ,及与物理光学 (PO)场叠加求取RCS的完整表达式。计算实例表明 ,新的方法具有更高的准确度 ,与实验测量值吻合     

带摆镜的制冷型中波红外像方扫描光学系统设计

基本形式的像方扫描光学系统依然需要复杂的二维回转机构带动成像镜组做二维扫描,所以二维回转机构需要承担较大载荷。分析了基本形式的像方扫描光学系统形式,并在基本形式基础上加入摆镜,只通过二维摆镜的旋转达到扫描像面的目的,大大减小二维回转机构载荷,提高扫描速度,简化了系统结构,减小了系统体积。加入摆镜后的光学系统除具有基本形式像方扫描光学系统的性质外,还有了新的限制条件,对带摆镜的像方扫描光学系统进行了分析,提出了设计条件及设计方法,并设计出具有较大视场的像方扫描光学系统。     

航空制件超声检测中的声场特性分析

 针对航空制件超声检测中影响缺陷定量准确性的声场问题进行了深入讨论, 研究了脉冲波声场的计算方法, 设计了相应的计算软件并绘制出实用换能器声轴线上的声压分布曲线, 分析了不同材料和厚度的采样回波对频谱的影响, 比较了连续波声场和脉冲波声场的分布特性及异同点。研究结果为提高超声检测中缺陷定量的准确性和科学性提供了依据。     

周期结构电磁特性在高频真空器件中的应用

作为行波类真空电子器件的核心组件,慢波结构是一种周期结构,其场可以有无限多个模式,每个模式由无穷多个空间谐波构成.每个空间谐波有相应的色散曲线且曲线各段有不同的特性.提出了周期结构色散特性的全维度开发的概念,并以一种可用微电机系统(MEMS)技术加工的折叠波导(FWG)慢波结构为例,对其色散特性进行了分析,利用这些色散特性开展了行波管(TWT)、返波管(BWO)等传统器件的研究工作,同时提出了过模器件、带边振荡器(BO)和谐波放大器(THAT)等新型器件,这些器件的实验研究则以W波段及其以上频率为主,最后给出了突破的关键技术以及测试得到的器件的主要性能.      

子带自适应阵列处理的实现与性能分析

针对空频自适应滤波处理中节拍样点两端的输出信干噪比急剧下降的问题,建立了子带自适应阵列处理与空时自适应阵列处理等效关系的数学模型,指出了变换正交基函数的影响,提出利用时频分析特性优良的小波包变换取代傅立叶变换形成新的子带自适应阵列处理,减少子带间的频谱混叠,从而提高系统节拍样点两端的输出信干噪比。对基于不同窗函数的空频自适应处理和基于小波包变换的子带自适应处理进行了性能仿真,验证了小波包相对于加窗空频自适应处理的优越性。     

Multiple-site investigation of the properties of an HF radio channel and the ionosphere using Digital Radio Mondiale broadcasting

The Digital Radio Mondiale (DRM), one of the new digital radio broadcasting standards, has been designed to overcome typical short wave radio channel difficulties, such as the multipath propagation and fast temporal changes of the received signal level, both related to the properties of the ionosphere along the path of propagation. In particular, some of the RF carriers used in the applied COFDM transmission technique serve to estimate the current state of the radio channel to enable the proper demodulation of the received signal.We have been detecting such RF carriers on select frequency channels (standard DRM broadcast) using a network of recording stations located in different parts of Poland in order to collect data on the HF radio channel. We have been also evaluating the usefulness of this procedure in providing information on the current state of the ionosphere in the refraction region between the transmitter and receivers. When the DRM system becomes more widespread, this method can supplement data that comes from the ionosondes, since it does not require much financial resources and the receivers can be easily scattered over a large area. This paper presents a set of experimental data and its analysis.     

Effect of blade tip winglet on the performance of a highly loaded transonic compressor rotor

The tip leakage flow has an important influence on the performance of transonic com-pressor. Blade tip winglet has been proved to be an effective method to control the tip leakage flow in compressor, while the physical mechanisms of blade tip winglet have been poorly understood. A numerical study for a highly loaded transonic compressor rotor has been conducted to understand the effect of varying the location of blade tip winglet on the performance of the rotor. Two kinds of tip winglet were designed and investigated. The effects of blade tip winglet on the compressor over-all performance, stability and tip flow structure were presented and discussed. It is found that the interaction of the tip winglet with the flow in the tip region is different when the winglet is located at suction-side or pressure-side of the blade tip. Results indicate that the suction-side winglet (SW) is ineffective to improve the performance of compressor rotor. In addition, a significant stall range extension equivalent to 33.74% with a very small penalty in efficiency can be obtained by the pressure-side winglet (PW). An attempt has been made to explain the fundamental mechanisms of blade tip winglet in detail.     

亚声速叶片与跨声速叶片的气动阻尼比较

为了研究叶轮机中叶片与流场流固耦合作用情况下的气动阻尼,分别以亚声速和跨声速转子叶片为例计算气动阻尼。根据对非定常气动力的分析,提出了一种与结构等效粘滞阻尼比对应的模态气动等效粘滞阻尼比的定义。采用弱耦合分域求解的算法,在线性范围内,计算并比较了跨声速叶片和亚声速叶片模态和振幅对模态气动阻尼比的影响,根据分布气动阻尼比研究压缩波对模态气动阻尼比的影响。研究结果表明这两类叶片的气动阻尼特性基本一致,所提参数对两类叶片的气动阻尼的影响基本相同。