液冷模块的热仿真分析

运用基于CFD的热仿真软件Flotherm对液冷模块进行了热仿真分析,分别研究了在不同环境温度,不同冷却液流量以及不同冷却液温度条件下,液冷模块内部温度场的变化规律。仿真分析结果表明,环境温度对液冷模块的温度场影响非常小;液冷模块冷却液流量的增幅与元器件温度的降幅并非正比关系;元器件温度的升幅与冷却液温度的增幅相同。     

航空发动机总温热电偶校检问题

由于航空总温热偶气动构件的复杂性，校验问题一直悬而未决。制成后的电偶热电特性迁移，及配套特性变化强调了配套校验是必要的。本文在着重分析了以上问题后，介绍了自行研制的已获国家专利的ＳＴＴ－１Ａ系列总温热电偶校验器。     

Longitudinal behaviors of the IRI-B parameters of the equatorial electron density profiles retrieved from FORMOSAT-3/COSMIC radio occultation measurements

The electron density profiles in the bottomside F₂-layer ionosphere are described by the thickness parameter B0 and the shape parameter B1 in the International Reference Ionosphere (IRI) model. We collected the ionospheric electron density (N_e) profiles from the FORMOSAT-3/COSMIC (F3/C) radio occultation measurements from DoY (day number of year) 194, 2006 to DoY 293, 2008 to investigate the daytime behaviors of IRI-B parameters (B0 and B1) in the equatorial regions. Our fittings confirm that the IRI bottomside profile function can well describe the averaged profiles in the bottomside ionosphere. Analysis of the equatorial electron density profile datasets provides unprecedented detail of the behaviors of B0 and B1 parameters in equatorial regions at low solar activity. The longitudinal averaged B1 has values comparable with IRI-2007 while it shows little seasonal variation. In contrast, the observed B0 presents semiannual variation with maxima in solstice months and minima in equinox months, which is not reproduced by IRI-2007. Moreover, there are complicated longitudinal variations of B0 with patterns varying with seasons. Peaks are distinct in the wave-like longitudinal structure of B0 in equinox months. An outstanding feature is that a stable peak appears around 100°E in four seasons. The significant longitudinal variation of B0 provides challenges for further improving the presentations of the bottomside ionosphere in IRI.     

Variation of rain drop size distribution with rain rate at a few coastal and high altitude stations in southern peninsular India

Rain drop size distribution (DSD) was measured at four places in Southern India {Thiruvananthapuram, Kochi, Munnar and Sriharikota (SHAR)} using a Joss–Waldvogel (JW) impact type disdrometer. The data for each minute were corrected for dead time errors and rain rate was computed from the corrected data. The data for a whole month were then sorted according to rain rate (R) into several classes ranging from 0.1 to >100 mm/h. The average DSD in each class was computed, and the lognormal distribution function was fitted to the average. In all the cases, the function fitted the data very well. The fit parameters were found to have dependence on rain rate. The total number of drops (N_T), the geometric mean diameter (D_g) and the standard geometric deviation (σ) were also computed from the fit parameters. The standard geometric deviation (σ) was found to be more or less constant with rain rate at all the sites and in all months. The other two parameters (N_T and D_g) were found to vary exponentially with rain rate except in Munnar, a high altitude station. At Thiruvananthapuram, in most of the months, N_T increased exponentially with rain rate up to some value of R, which was different in different months, and then remained more or less constant or decrease slightly. In all cases, the variation of N_T and D_g was such that N_TD_g³ increased linearly with rain rate.     

有限元法在光学侧窗热防护设计中的应用

光学侧窗热环境极为严酷,可采用液体对流内冷却技术对光学侧窗进行热防护。以有限元法对光学侧窗温度场进行了分析研究,研究结果表明:该方法计算精度可靠;液体对流内冷却技术能有效起到降温的作用。同时还定量的给出了冷却液用量对结构温度场的影响,为设计的经济可行性提供了保障。     

主燃孔位置对基于RQL高温升燃烧室流动与燃烧特性影响的数值模拟

为将富油燃烧/快速淬熄/贫油燃烧（RQL）用于高温升燃烧室设计，以实现温升与排放的良好统一，对不同主燃孔位置下 的单头部矩形燃烧室流动、淬熄区气流混合、燃烧和排放特性进行数值模拟。结果表明：燃烧室中心回流区的长度和高度随着主 燃孔轴向距离的增大而增大。随着主燃孔轴向距离的增大，主燃孔射流深度增加，射流角度逐渐向下游偏转，导致淬熄区内气流 的混合效果减弱；随着主燃孔位置的后移，富油区内的当量比显著增大，导致CO和碳烟的生成量迅速增加，淬熄区内的沿程高温 区域面积逐渐缩小，燃烧效率逐渐降低。当X/H=0.7时，燃烧室沿程NO生成量始终处在较大值；而当X/H=0.9时，燃烧室沿程NO 生成量始终处于较小值，但CO的生成量增大。     

拓扑优化在机载计算机结构设计中的应用

为了解决机载计算机零件结构设计过程中出现的材料分布不合理及重量要求苛刻等问题，在设计过程中引入拓扑优化。介绍了基于变密度法的拓扑优化理论，以Hyperworks／Optistruct为拓扑优化分析平台，对某机载计算机零件进行了拓扑优化，确定了零件的最佳材料分布。结果表明：通过优化设计可以在保持零件基本结构性能的基础上减轻其重量。     

Ansys在镀锌锅空间温度场分析中的应用

利用Ansys对镀锌锅上方空间的温度场进行模拟。在模拟过程中，利用Ansys软件中的FlotranCFD模块建立模型，计算锌锅上方空间的流场和温度场分布情况，分析温度的主要影响因素，为热镀锌生产线的工程设计提供了理论依据。此方法也为温度分析提供了一种新的思路。     

运载火箭贮箱壁板化铣旋转设备的设计

根据运载火箭贮箱壁板精密化学铣切减重的技术要求,分析了设计技术难点,通过确定制动电机,计算传动比、线速度,释放扭矩和消除两侧齿轮间隙等,研制了一套专用定位倍式化学铣切旋转设备。采用倍式转动化学铣切,减少了传动间隙,提高了转动扭矩和使用寿命加工精度,确保运载火箭贮箱壁板的精密化学铣切的要求。     

Three dimensional investigation of the shock train structure in a convergent–divergent nozzle

Three-dimensional computational fluid dynamics analyses have been employed to study the compressible and turbulent flow of the shock train in a convergent–divergent nozzle. The primary goal is to determine the behavior, location, and number of shocks. In this context, full multi-grid initialization, Reynolds stress turbulence model (RSM), and the grid adaption techniques in the Fluent software are utilized under the 3D investigation. The results showed that RSM solution matches with the experimental data suitably. The effects of applying heat generation sources and changing inlet flow total temperature have been investigated. Our simulations showed that changes in the heat generation rate and total temperature of the intake flow influence on the starting point of shock, shock strength, minimum pressure, as well as the maximum flow Mach number.