飞机飞行控制律/操纵效率器多学科优化设计

基于近似模型和遗传算法,针对多操纵面布局飞机提出一种对全包线飞行控制律和操纵效率器几何形状与位置进行多学科优化的设计方法.该方法采用力矩控制方式进行控制,应用鲁棒增益调参方法设计全包线飞行控制系统,利用试验设计方法和径向基神经网络响应面获取近似的气动学科模型和控制学科模型,在近似模型基础上由遗传算法获得优化的设计参数并最终获得优化的控制律和操纵效率器.以某多操纵面布局无尾飞机为例进行计算机飞行仿真验证,结果表明该方法具有可行性.      

硅橡胶基防热涂层动态烧蚀行为及机理研究

针对两种典型硅橡胶基防热涂层开展高温燃气流烧蚀实验，通过对烧蚀后涂层的宏观及微观形貌分析，探讨了其防隔热机理及烧蚀模型。研究结果表明：烧蚀后两种涂层均存在液态层、陶瓷层、热解层以及原始层；烧蚀过程中甲基苯基硅橡胶涂层主要发生主链“回咬”成环反应，导致树脂基体交联密度降低，力学性能下降，涂层外表面发生开裂，甲基乙烯基硅橡胶涂层则主要发生侧基交联反应，使树脂基体交联密度上升，促进涂层发生陶瓷化转变；热辐射、热容吸热、热解反应吸热以及热阻塞效应为四种主要的热耗散机制，质量损失产生的原因主要包括反应气体释放以及气动剪切力导致的机械剥蚀。     

大型民用飞机偏离特性与尾旋敏感性分析

为了研究某常规布局大型民用飞机的偏离特性与尾旋敏感性,在CARDC的FL-14水平风洞(Φ3. 2m)中进行了飞机模型的大迎角静态测力试验。通过对试验结果的充分挖掘,利用一系列的稳定性判据进行分析,获得了飞机的大致初始偏离迎角和偏离区间,并预测了飞机的尾旋敏感性。     

轴压开口圆柱薄壳屈曲分析与试验

开口圆柱薄壳结构的轴向承载能力和稳定性分析是空间薄壁管式伸展机构(STEM,Storable Tubular Extendable Member)设计的关键问题之一.基于特征值屈曲分析方法,研究了轴压铍青铜开口圆柱薄壳结构在两端固支条件下的屈曲载荷与设计参数间的关系,利用幂函数拟合的方法建立了一种轴压开口圆柱薄壳屈曲载荷模型.通过铍青铜开口圆柱薄壳轴向压缩试验对特征值屈曲分析和所建立的轴压开口圆柱薄壳屈曲载荷模型进行了验证.结果表明:特征值屈曲分析方法可用于各向同性材料开口圆柱薄壳结构在两端固支条件下的轴向承载能力与稳定性分析;使用轴压开口圆柱薄壳屈曲载荷模型计算各向同性材料的开口圆柱薄壳在两端固支条件下受轴压作用时的屈曲载荷,最大误差为21%.     

Anthropogenic trigger of substorms and energetic particles precipitations

The high-frequency (HF) emission in near-Earth space from various powerful transmitters (radio communications, radars, broadcasting, universal time and navigation stations, etc.) form an integral part of the modern world that it cannot do without. In particular, special-purpose research facilities equipped with powerful HF transmitters are used successfully for plasma experiments and local modification of the ionosphere. In this work, we are using the results of a complex space-ground experiment to show that exposure of the subauroral region to HF emission can not only cause local changes in the ionosphere, but can also trigger processes in the magnetosphere–ionosphere system that result in intensive substorm activity (precipitations of high-energy particles, aurorae, significant variations in the ionospheric parameters and, as a consequence, in radio propagation conditions).     

Efficiency optimized fuel supply strategy of aircraft engine based on air-fuel ratio control

Accurate fuel injection control of aircraft engine can optimize the energy efficiency of UAV power system while meeting the propeller speed requirement. Traditional injection control method such as open-loop calibration causes instability of fuel supply which brings the risk of power loss of UAV. Considering that the closed-loop control of AFR can ensure a stable fuel feeding, this paper proposes an AFR control based fuel supply strategy in order to improve the efficiency of fuel-powered UAV while obtaining the required engine speed. According to the optimum fuel injection results, we implement fuzzy-PID method to control the set AFR in different situations. Through simulation and experiment studies, the results indicate that, to begin with, the calibrated mathematical model of the aircraft engine is effective. Next, this fuel supply strategy based on AFR control can normally realize the engine speed regulation, and the applied control algorithm can eliminate the overshoot of AFR throughout all the working progress. What is more,the fuel supply strategy can averagely shorten the response time of the engine speed by about two seconds. In addition, compared with the open-loop calibration, in this work the power efficiency is improved by 9% to 33%. Last but not the least, the endurance can be improved by 30 min with a normal engine speed. This paper can be a reference for the optimization of UAV aircraft engine.     

Reconnection and fast particle production in tokamak and solar plasmas

Detailed in situ studies of magnetic reconnection and particle acceleration, which play a crucial role in the release and redistribution of energy in solar flares, can be performed in tokamak plasmas under conditions resembling those of the flaring solar corona. Recent measurements and modelling of fast particle production during reconnection events in the Mega-Amp Spherical Tokamak (MAST) are described. Specifically, observations in this device of electron acceleration during edge localised modes, and of both ion and electron acceleration during merging-compression plasma start-up, are presented, and possible implications of these studies for particle acceleration in flares are discussed. The results from MAST lend weight to the conjecture that large numbers of ions are accelerated to sub-MeV energies in flares.     

旋转式电动机构试验装置测量不确定度评定

着重介绍了旋转式电动机构试验装置现场校准的原理及测量不确定度的评定方法.     

计算物理中的数学实验方法

论述了计算物理与数学实验的关系,以及数学实验对计算物理的重要性,并通过实例说明,利用数学实验方法可以简化计算,突出物理概念,使问题得到更好的解决。