自适应机翼翼型变形的研究现状及关键技术

自适应机翼具有巨大的应用潜力,是未来飞机设计的必然趋势,已经得到了广泛的关注。分别从自适应变弯度前缘、自适应变弯度后缘以及变厚度机翼三个方面阐述了其变形原理,并对使用的蒙皮、驱动方式、研究方法等进行了归纳总结,指出了未来的发展趋势,提出了自适应机翼亟需解决的关键技术,包括兼具大变形和高承载功能的柔性蒙皮的设计、自适应驱动系统设计、协同控制系统的设计、分布式传感器网络,可为自适应机翼结构的设计与实现途径提供一定的技术参考。     

Framework and development of data-driven physics based model with application in dimensional accuracy prediction in pocket milling

In the manufacturing of thin wall components for aerospace industry, apart from the side wall contour error, the Remaining Bottom Thickness Error (RBTE) for the thin-wall pocket component (e.g. rocket shell) is of the same importance but overlooked in current research. If the RBTE reduces by 30%, the weight reduction of the entire component will reach up to tens of kilograms while improving the dynamic balance performance of the large component. Current RBTE control requires the off-process measurement of limited discrete points on the component bottom to provide the reference value for compensation. This leads to incompleteness in the remaining bottom thickness control and redundant measurement in manufacturing. In this paper, the framework of data-driven physics based model is proposed and developed for the real-time prediction of critical quality for large components, which enables accurate prediction and compensation of RBTE value for the thin wall components. The physics based model considers the primary root cause, in terms of tool deflection and clamping stiffness induced Axial Material Removal Thickness (AMRT) variation, for the RBTE formation. And to incorporate the dynamic and inherent coupling of the complicated manufacturing system, the multi-feature fusion and machine learning algorithm, i.e. kernel Principal Component Analysis (kPCA) and kernel Support Vector Regression (kSVR), are incorporated with the physics based model. Therefore, the proposed data-driven physics based model combines both process mechanism and the system disturbance to achieve better prediction accuracy. The final verification experiment is implemented to validate the effectiveness of the proposed method for dimensional accuracy prediction in pocket milling, and the prediction accuracy of AMRT achieves 0.014 mm and 0.019 mm for straight and corner milling, respectively.     

垂直起降运载火箭返回轨迹不确定性优化

针对垂直起降运载火箭一子级在返回着陆的过程中存在的参数不确定性,提出了一种基于非侵入式多项式混沌展开的序列优化和可靠度评估的返回轨迹不确定性优化方法。首先,建立了返回多飞行段轨迹在确定性条件下的优化模型。然后,为同时兼顾轨迹的鲁棒性和可靠性,建立了由鲁棒最优目标函数、基于可靠度的路径约束和鲁棒等式约束组成的不确定性返回轨迹优化模型。最后,基于非侵入式多项式混沌展开方法对鲁棒目标函数和等式约束进行量化处理,将原随机鲁棒优化问题转化为高维状态空间中的等价确定性优化问题;为提高路径约束的可靠度评估效率,基于非侵入式多项式混沌展开方法对最可能点法进行改进,进一步发展了序列优化和可靠度评估策略。数值仿真结果表明,所提出的不确定性优化方法具有较好的鲁棒性,可以满足工程可靠性指标要求,同时还具有较高的精度和计算效率。     

Impact of bending dies with different friction forms on forming force and quality of tubes manufactured by free bending technology

In the 3D free bending forming system, the bending die can be designed either in a sliding type or rolling friction type. Bending die-based sliding friction type is often called normal bending dies; however, the bending dies-based rolling friction type includes bending die-based roller type and ball type in structure. In the current study, the impact of three bending dies on the forming force, and the bent tube quality was investigated. The obtained results showed that the tangential stresses and strains of the tubes formed by the bending die-based roller type were the smallest among the three bending dies. Besides, the spherical bearing force P_U was reduced drastically after using the roller type and ball type compared to the sliding friction type. Moreover, the uniformity of the wall thickness distribution of the tubes formed by the roller type and ball type was better than those obtained from the sliding friction type. In addition, the cross-section distortion rate was reduced by 2.8% using the roller type, and 1.8% using ball-type compared to the sliding friction type.     

Analysis on Potential Conflict Frequency of Intersected Air Routes in Terminal Airspace Design

In order to obtain accurate conflict risks in terminal airspace design, the concept and calculation model of potential conflict frequency for intersected routes are proposed. Conflict frequency is represented by the product of horizontal conflict frequency and vertical conflict probability. The horizontal conflict frequency is derived from the probability density distribution of conflicts in a period of time. Based on the recorded radar trajectory data, the concept and model of ROUTE distance are proposed, and the probability density function of aircraft height at a specified ROUTE distance is deduced by kernel density estimation. Furthermore, vertical conflict probability and its horizontal distribution are achieved. Examples of three intersected arrival and departure route design schemes are studied. Compared with scheme 1, the conflict frequency values of the other two improved schemes decrease to 53 % and 24%, respectively. The results show that the model can quantify potential conflict frequency of intersec ted routes.     

CVI沉积炭纤维束的组织结构

采用CVI工艺在常压下对单束炭纤维进行热解沉积,天然气为前驱体,N2为载气,沉积温度为1 020～1 100℃,沿纤维束轴向分布。对不同位置炭纤维束外和束内热解炭组织结构分别进行PLM表征。研究发现,束外热解炭在距离热电偶(0位置)上方40～80 mm处沉积厚度达到最大,在0～80 mm内组织结构良好,主体为高织构;束内沉积热解炭的厚度较均匀,组织结构的变化与束外一致。对气体裂解过程中的反应气体组分进行模拟并与实验对比,发现生成高织构时,热解反应中间产物中的C2H2/C6H6范围为15～35。     

盘轴转子系统临界转速计算的改进传递矩阵法

在用传递矩阵法分析转子系统的临界转速时,传统的方法是忽略轮盘的厚度,将轮盘的传递矩阵作为点矩阵来处理的,这样会导致转子轴的刚度比实际模型的低,进而导致临界转速的计算结果偏低。本文将通过轮盘的传递矩阵作为场矩阵来处理,对计及轮盘厚度的传递矩阵进行了推导。分别使用传统传递矩阵法和本文提出的改进传递矩阵法对2个盘在不同位置的单盘转子模型以及一个多盘转子系统的临界转速进行了计算。对比结果表明,传统传递矩阵法的计算误差很容易就会达到一个不可忽略的水平,改进的传递矩阵法解决了这一问题。     

基于MHSS算法的ARAIM完好性和可用性预测

传统的接收机自主完好性监视只能提供非精密进近阶段的完好性监视,无法实现对完好性要求更加严格的飞行阶段的监视,而高级接收机自主完好性监视（AdvancedReceiverAutonomousIntegrityMonitoring,ARAIM）可以在精密进近阶段为飞机提供满足航向信标性能垂直引导（LocalizerPerformancewithVerticalguidance,LPV）的完好性监视服务。文章基于多假设分组解算法,根据目前的星座环境,结合民航不同飞行阶段的应用需求,对ARAIM算法进行仿真研究。针对水平保护级（HorizontalProtectionLevel,HPL）和垂直保护级（VerticalProtectionLevel,VPL）的指标,在不同星座组合环境下,选取南北半球不同经纬度的5个观测机场,分别仿真了HPL和VPL的变化情况,并对全球HPL和VPL平均分布趋势,以及以99%的概率满足LPV-200进近可用性指标时,ARAIM可用性的全球覆盖率进行了仿真预测分析。仿真结果表明,不论是全球定位系统和格洛纳斯双星座还是增加北斗卫星导航系统后的三星座,5个观测机场的HPL和VPL均能满足LPV-200进近对完好性指标的要求;但在全球范围内,双星座条件下,ARAIM并不能完全支持LPV-200进近对完好性监视的要求,而三星座则可大大提高ARAIM的可用性,为民航用户提供满足精密进近的所需导航服务性能。     

气压垂直导航中修正高度分析

在世界海拔最高民用机场四川稻城亚丁机场的基于性能导航(PBN)飞行程序设计过程中,由于GPS在垂直方向精度较低,最后进近航段采用气压垂直导航(Baro-VNAV).但机场海拔高,这种导航方式受到修正高度的影响较大.因此通过对ISA偏差对气压高度的影响公式进行推导,得出修正高度公式,利用Matlab对机场温度、航段高、机场标高与修正高度H修的关系进行分析,并以四川稻城亚丁机场Baro-VNAV实例进行了验证.最终给出了在PBN飞行程序设计过程中的建议.     

Performance evaluation of IRI-2007 at equatorial latitudes and its Matlab version for GNSS applications

International Reference Ionosphere (IRI) model is the widely used empirical model for ionospheric predictions, especially TEC which is an important parameter for radio navigation and communication. The Fortran based IRI-2007 does not support real-time interactive visualization and debugging. Therefore, the source code is converted into Matlab and is validated for the purposes of this study. This facilitates easy representation of results and for near real-time implementation of IRI in the applications including spacecraft launching, now casting, pseudolite based navigation systems etc. In addition, the vertical delay results over the equatorial region derived from IRI and GPS data of three IGS stations namely Libreville (Garbon, Africa), Brasilia (Brazil, South America) and Hyderabad (India, Asia) are compared. As the IRI model does not account for plasmasphere TEC, the vertical delays are underestimated compared to vertical delays of GPS signals. Therefore, the model should be modified accordingly for precise TEC estimation.