Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

The role of AVDR in linear cascade testing

Linear cascade testing plays an important role in the research and development of turbomachinery and is widely used over the world.The ideal cascade model of a turbomachinery blade row is two-dimensional.In actual linear cascade testing, the flow through the test section converges due to the development of the boundary layer and secondary flow along the sidewall surfaces of the test section.Axial velocity density ratio(AVDR) is adopted to account for the deviation of the tested cascade flow from the ideal 2D model.Among numerous published cascade works, the influence of AVDR on cascade performance is seen to be complicated with many affecting factors, such as those related to cascade/blade geometry and flow conditions.Also, controlling AVDR is limited by the facility capability.Furthermore, real blade-to-blade flow in turbomachines is usually associated with AVDR greater than unity due to limited span of blades between the hub and shroud such that cascade testing without reducing AVDR could be favored sometimes.All these facets add complexity and diversification to the matter.The current paper reviews previous studies and results on AVDR.Consolidated understanding on the role of AVDR and recommendations on how to deal with it in linear cascade testing are provided.      

基于距离像特征的复合速度估计算法研究

首先分析了步进频率宽带信号混频处理原理和目标速度对距离像的影响。在此基础上,提出了基于距离像熵和距离像对比度的速度估计算法,详细分析了这两种算法的数学原理、步骤、效果、适用条件等。最后,基于这两种算法又提出了复合速度估计算法,大大提高了速度估计精度。     

GNSS Satellite Autonomous Integrity Monitoring (SAIM) using inter-satellite measurements

Integrity is the ability of Global Navigation Satellite Systems (GNSS) to detect faults in measurements and provide timely warnings to users and operators when the navigation system cannot meet the defined performance standards, which is of great importance for safety of life critical applications. Compared with both Receiver Autonomous Integrity Monitoring (RAIM) and ground based GNSS Integrity Channel (GIC) methods which are widely adopted nowadays, the Satellite Autonomous Integrity Monitoring (SAIM) method can be used to monitor orbit/ephemeris and clock errors, and has advantages in monitoring orbit and clock quality and providing instantaneous responses when faults happen.     

防风网对煤堆遮风效果的风洞实验研究

为了考察防风网对堆场煤堆的遮风效果,进行了防风网与煤堆之间区域的流场可视化实验。使用风洞模拟大气边界层条件,并将开孔率为38.5%的防风网模型布置在煤堆模型前方。实验中采用粒子成像测速(PIV)系统测量了防风网和堆场区域的平均风速分布,并且获得了煤堆表面的摩擦风速分布,进一步估算煤堆起尘量的变化情况。实验发现,防风网可有效降低煤堆表面迎风区域的摩擦风速,而对背风面的流场分布影响较小。研究结果可为防风网的遮护作用提供一定的实验支持。     

SACMA和QMW试验方法对复合材料层合板低速冲击后压缩行为的影响

采用了 SACMA标准和一种小试样试验方法对复合材料层合板低速冲击后的压缩 (CAI)行为进行试验研究 ,从层合板的冲击损伤分布、冲击后压缩破坏过程 ,以及层合板的准静态横向压缩、开孔后压缩等多方面进行对比 ,结果表明 ,这两种试验方法存在很大差别 ,试验方法不同 ,层合板低速冲击后的压缩行为也不同 ;采用 SACMA标准所测得的低速冲击后压缩强度更能全面反映基体韧性的优劣。作为 CAI试验标准 ,小试样试验方法还有待改进     

固体颗粒冲蚀对钛合金ZrN涂层抗冲蚀性能的影响

采用真空电弧镀在TC11钛合金上沉积ZrN涂层,固体颗粒冲蚀实验研究不同冲蚀颗粒、冲蚀速度、冲蚀角度对涂层抗冲蚀性能的影响,并用SEM观察表面及断面形貌.结果表明,在相同冲蚀条件下,ZrN涂层冲蚀率随冲蚀颗粒硬度、冲击角度及冲蚀颗粒速度的增加而增加,冲蚀角度为90°时,ZrN涂层冲蚀速率最大,ZrN涂层提高了TC11钛合金的抗冲蚀性能.     

上游叶片尾迹对转子叶片非定常表面压力频谱特性影响的研究

为了研究上游叶片尾迹对轴流压气机转子叶片非定常表面压力的影响,采用在叶片表面埋设微型压力传感器的方法,测量了一个单级低速轴流压气机转子叶片的非定常压力分布。对转子叶片非定常压力分布的分析显示:转子叶片压力面非定常表面压力主要受上游叶片尾迹影响,其主导频率为上游叶片尾迹频率及其倍频,压力波动幅度随上游叶片尾迹的衰减而沿流向减弱。转子叶片吸力面非定常压力受叶片附面层和上游叶片尾迹共同影响,其主导频率为上游叶片尾迹频率及其倍频,但是在吸力面前部气流加速区压力波动幅度沿流向增大,而在吸力面后部气流减速区压力波动幅度沿流向减小。在存在尾缘分离的情况下,在分离区附近产生较大压力波动。尾缘气流分离产生的压力波动频谱中含有上游叶片尾迹频率及其倍频的分量,但其频谱可能比较复杂,并非单一地受上游叶片尾迹影响。      

弹道导弹突防某型ABL的自旋速度研究

叙述了某型机载激光武器(ABL)的作战方案、杀伤威力及其对弹道导弹的威胁。针对弹道导弹主动段自旋的突防方案,分析了弹道导弹自旋速度的上限、下限和具备突防某型ABL能力的最小自旋速度。以某型远程弹道导弹为例,通过仿真计算确定了其突防某型ABL最合适的自旋速度范围。研究结果表明,所确定的自旋速度范围既能在某型弹道导弹上实现,又能达到突防某型ABL的效果,表明弹道导弹主动段自旋是防御激光武器的一种有效措施。     

RP-3航空煤油模拟替代燃料燃烧特性的实验

在定容弹中实验测试了初始压力分别为0.1、0.3 MPa、初始温度分别为390、400、420 K、当量比范围为0.8～1.5时RP-3航空煤油模拟替代燃料的层流燃烧特性,并对比分析了模拟替代燃料与RP-3航空煤油的层流燃烧速率。结果表明,模拟替代燃料层流燃烧火焰的马克斯坦长度随初始压力或当量比的降低逐渐增大,表明火焰稳定性逐步增强;初始温度对火焰稳定性的影响不明显;随初始温度的升高或初始压力的降低,模拟替代燃料的层流燃烧速率逐渐升高;随着当量比的逐渐增大,模拟替代燃料的层流燃烧速率先增大后降低,在当量比为1.2时达到最大;在相同工况下,模拟替代燃料与RP-3航空煤油的层流燃烧速率吻合较好。