含低速冲击损伤层压板的压缩破坏研究

对复合材料的结构损伤演化过程的研究在飞机结构设计中具有越来越重要的工程指导意义。针对含低速冲击损伤层压板的压缩分析,提出了一种考虑层间损伤的三维有限元模型,该模型通过层间节点耦合方式,将复合材料层压板各子层粘合到一起,能准确、形象的模拟层间的相互作用。同时,基于累积损伤思想开发了复合材料层压板压缩过程的损伤仿真程序,该...     

热发射测速技术

本文叙述了一种通过探测高温两相流中热粒子的热辐射来测量粒子速度的热发射测速技术,该技术曾多次用于测量电弧加热器射流和火箭弹尾喷火焰中的粒子速度,取得了比较满意的结果。     

流量测量所需管流条件的试验研究

速度法测量气体流量,其前提条件是被测面的管流为充分发展、对称分布的典型管流。通过90°弯头管流试验研究分析,得出弯头下游不同距离截面上的管流分布情况,为90°弯头下游选择典型管流的测量位置提供了可靠的依据。     

飞翼布局组合舵面航向控制特性综合研究

寻求高效实用的航向控制措施一直是飞翼布局飞行器设计的难点。提出了一种由外翼上翼面嵌入式阻力舵和其相对应的后缘副翼组成的组合舵航向控制措施,通过CFD方法、风洞试验和模型飞行试验3种研究手段,综合研究了单独部件和组合舵在低速、亚声速时的航向控制特性。结果表明：单独阻力舵的航向控制能力比较强,但与纵横向力矩耦合严重,需与其他舵组合使用;单独副翼的航向控制能力很弱,且与纵横向力矩耦合非常严重,建议不单独作为航向控制措施使用;组合舵的航向控制能力强,选取阻力舵与副翼的舵偏角角度差在0°~5°范围的组合舵方案,可以大幅度削弱与纵横向的力矩耦合程度,实现操纵舵面解耦设计;无论单独部件,还是组合舵,舵偏角为0°~6°范围的力矩变化规律较差,建议通过预置舵偏角等方式避开此角度区域。     

带落速落角约束的高超声速飞行器俯冲轨迹规划方法

针对高超声速飞行器俯冲段精确打击任务需求,提出了一种能够同时满足落速与落角约束的轨迹规划方法。建立了两段式轨迹规划策略,第一段采用参数化控制剖面调节飞行速度,第二段采用传统偏置比例导引律实现落角控制。将控制剖面的参数设计分解为多参数优化与单参数搜索两个问题：通过离线求解可行初始位置范围最大的多参数优化问题,提高控制剖面对初始偏差的适应性;通过在线求解带罚函数的单参数搜索问题,得到落速偏差最小的俯冲轨迹。结合高超声速飞行器模型,对所提出的俯冲轨迹规划方法进行了仿真。结果表明,该方法能够得到满足落速与落角约束的俯冲轨迹,具有较好的求解效率,且对初始状态偏差具有较强的鲁棒性。     

贴地飞行时旋翼空气动力学实验研究

 本文对贴地飞行时的旋翼进行了流场显示和桨盘处下洗速度测量的实验研究。揭示并研究了环流和地面涡现象及其对旋翼平面下洗速度分布的影响,指出了旋翼贴地飞行时拉力、力矩等剧烈变化的原因。     

大角速度柔性航天器动力学模型修正

将拉格朗日方程及其准坐标形式用于中心刚体加柔性附件航天器的拉格朗日函数,推导了中心刚体加柔性附件航天器动力学模型。针对航天器大角速度,分析中心刚体角速度对角动量方程的影响,对传统动力学模型进行修正。航天器绕惯量主轴大角速度自旋仿真结果验证了修正后的动力学模型对于大角速度航天器的有效性。     

Study on ballistic penetration resistance of titanium alloy TC4, Part II: Numerical analysis

Enhancing containment capability and reducing weight are always great concerns in the design of casings. Ballistic tests can help to mitigate a catastrophic event after a blade out, yet taking time and costing money. A wise way is to hunt for a validated numerical simulation technology, through which the material dynamic behavior over the strain rate range in the ballistic tests should be represented and reasonable failure strain should be defined. The simulation results show that the validation of the numerical simulation technology based on the test data can accurately estimate the absorption energy, describe the physical process and failure mode during the penetration, as well as the failure mechanism. It is found that energy dissipation of projectiles is in manner of compression stage, energy conversion stage, and interactive scrap stage. An effect indicator is proposed, where the factors of critical velocity including impact orientation and mass of projectiles and thickness of casings are considered. The critical velocity presents a linear relation with the effect indicator, which implies the critical velocity obtained by the flat casing could underestimate the capability of the real casing.     

Integration of GPS and low cost INS for pedestrian navigation aided by building layout

In outdoor environments, GPS is often used for pedestrian navigation by utilizing its signals for position computation, but in indoor or semi-obstructed environments, GPS signals are often unavailable. Therefore, pedestrian navigation for these environments should be realized by the integration of GPS and inertial navigation system （INS）. However, the lowcost INS could induce errors that may result in a large position drift. The problem can be minimized by mounting the sensors on the pedestrian＇s foot, using zero velocity update （ZUPT） method with the standard navigation algorithm to restrict the error growth. However, heading drift still remains despite using ZUPT measurements since the heading error is unobservable. Also, tbot mounted INS suffers from the initialization ambiguity of position and heading from GPS. In this paper, a novel algorithm is developed to mitigate the heading drift problem when using ZUPT. The method uses building lay- out to aid the heading measurement in Kalman filter, and it could also be combined for the initial- ization. The algorithm has been investigated with real field trials using the low cost Microstrain 3DM-GX3-25 inertial sensor, a Leica GS10 GPS receiver and a uBlox EVK-6T GPS receiver. It could be concluded that the proposed method offers a significant improvement in position accuracy for the long period, allowing pedestrian navigation for nearly40 min with mean position error less than 2.8 m. This method also has a considerable effect on the accuracy of the initialization.     

基于角速率和速度增量的捷联惯性导航算法研究

捷联惯性导航算法一般是基于惯性器件输出为角速率、比力或角增量、速度增量进行设计的,不能直接应用于陀螺输出为角速率、加速度计输出为速度增量的捷联惯性导航系统。为了解决此问题和满足精度要求,重新设计了一套捷联惯性导航算法:姿态更新算法采用了经典的四阶龙格-库塔法,推导出了一种新的速度更新算法,该算法可以有效补偿速度计算中的划桨效应误差。仿真结果表明,该种速度更新算法仿真速度快、精度高,具有一定的工程实用价值。