离心式压气机出口动态压力的关联维数特征分析

基于相空间重构理论,以800kW离心式压气机在不同工况下的出口动态压力为研究对象,分析了其时域、频域和关联维数特征,目的是实现喘振识别.结果表明:系统稳态时,动态压力幅值小且随机特性强,系统的混沌特征较为明显.此状态下的关联维数曲线波动很大,饱和关联维数也较大(8～20),并且部分时段不存在饱和关联维数.而随着系统经过...     

某型涡轴发动机喘振攻关与验证

针对某型涡轴发动机夏季试车时常发生加速喘振故障的问题,使用故障树初步分析引起喘振的主要原因,并通过径向扩压器叶片进行流场仿真、串装、多台发动机对比计量、试车试验等,对喘振原因进行深入分析。研究表明径向扩压器进口叶根倒角变大对发动机加速性能有一定程度的改善作用,大气条件对发动机加速性有一定影响,径扩面积越大、叶根圆角与进气边转接越顺滑,越有利于加速性能。     

Pneumatic pressure control based on improved NMPC and its application to aeroengine surge simulation

In the semi-physical simulation of aeroengines, using the pneumatic pressure servo control technology to provide realistic pneumatic excitation to the sensors and electronic controller can improve the confidence of the simulation and reduce the test cost and risk. However, the existing methods could not satisfy the precise simulation of large-amplitude and high-frequency pulsating pressure during aeroengine surge. In this paper, a pneumatic pressure control system with asymmetric groups of the High-Speed on–off Valve (HSV) is designed, and an Improved Nonlinear Model Predictive Control (INMPC) method is proposed. First, the volumetric flow characteristics of HSV are tested and analyzed with Pulse Width Modulation (PWM) signal input. Then, a simplified HSV model with the volume flow characteristic correction is developed. Based on these, an integrated model for the whole system is further established and used as the prediction model in INMPC. To improve the computational speed of the rolling optimization process, the mapping scheme from control signal to PWM duty cycle of HSVs and the objective function with exterior penalty function are designed. Finally, the random step, sinusoidal and real engine surge data are set as the reference pressure in multiple comparative experiments to verify the effectiveness of the pressure tracking system.     

A high-safety active/passive hybrid control approach for compressor surge based on nonlinear model predictive control

Surge active control can expand the stable operating range of the compressor. However, the difficulty of flow measurement, dynamic uncertainty disturbance, actuator delay characteristics, hard constraints of control variable, and system security measures have not been fully considered in the existing active control system, which significantly hinders its engineering application. Therefore, a nonlinear model predictive surge active control method is first presented based on flow estimator designed by using a continuous-time Kalman filter for dealing with the hard constraint of control variable and the impact of actuator delay of compression system with dynamic uncertainty. Then, a high-safety active/surge passive hybrid control strategy is designed, dominated by the surge active control and supplemented by the surge passive control, to ensure the compression system’s safe and stable operation. Lastly, the simulation results suggest that the flow estimator accurately estimates the compressor flow. When considering the delay impact of the actuators and sensors and measurement noise on the system, the proposed method exhibits stronger robustness than the existing methods. The active/surge passive hybrid control strategy can successfully ensure the compression system's safe and stable operation. This paper is of high practical significance for the engineering application of future compressor surge active control technologies.