钛合金导管的涡流检测

通过对大批量的钛合金管材进行涡流检测,从涡流检测原理以及影响因素等方面分析了缺陷信号、噪声信号的产生以及差异,通过多次调试试验得到了各种规格管材的检测参数,其中对检测结果影响比较大的频率、增益进行了多次对比试验,得到了最佳参数范围,为管材的可靠性判断提供了依据.     

Matrix Power Control Algorithm for Multi-input Multi-output Random Vibration Test

 Both auto-power spectrum and cross-power spectrum need to be controlled in multi-input multi-output (MIMO) random vibration test. During the control process with the difference control algorithm (DCA), a lower triangular matrix is derived from Cholesky decomposition of a reference spectrum matrix. The diagonal elements of the lower triangular matrix (DELTM) may become negative. These negative values have no meaning in physical significance and can cause divergence of auto-power spectrum control. A proportional root mean square control algorithm (PRMSCA) provides another method to avoid the divergence caused by negative values of DELTM, but PRMSCA cannot control the cross-power spectrum. A new control algorithm named matrix power control algorithm (MPCA) is proposed in the paper. MPCA can guarantee that DELTM is always positive in the auto-power spectrum control. MPCA can also control the cross-power spectrum. After these three control algorithms are analyzed, three-input three-output random vibration control tests are implemented on a three-axis vibration shaker. The results show the validity of the proposed MPCA.     

透波材料高温介电性能评价表征

概述了透波材料高温介电性能评价表征的研究意义及相关的基本概念、测试方法;介绍了国内外发展现状,以高Q腔法为例阐述了高温测试中关键共性技术,并对典型测试结果进行了分析;展望了透波材料高温介电性能评价表征的发展及应用前景.     

航空嵌入式软件测试环境确认方法研究

通过对国军标与DO-178B对航空嵌入式软件测试环境确认要求的对比与分析,提出了一种满足国军标与DO-178B要求的航空嵌入式软件测试环境确认方法。实际运用表明,方法灵活、高效、可操作性强,可以满足航空嵌入式软件测试环境确认的要求。     

飞机喷口滑油泵斜盘操控性能的试验系统研制与调试

为在规定的θ-P试验条件下检测斜盘操控性能,喷口滑油泵测试液压系统中设置了3个固定孔径的节流器.通过对斜盘扭矩测试的试验方法、步骤及试验设备的介绍,以正向节流孔参数确定为例,建立了系统压力P与油泵斜盘角度θ的方程式,并通过标准泵的预置节流孔试验,获得了与油泵和节流孔结构形状有关的系数.再采用维算-试验测试-对比修改的试...     

Modeling and identification of an electro-mechanical system: The LISA grabbing positioning and release mechanism case

In the frame of space missions, mechanisms often constitute critical systems whose functionality and performance need to be tested on ground before the mission launch. The LISA scientific space mission will detect gravitational waves by measuring the relative displacement of pairs of free-floating test masses set into geodesic motion onboard of three spacecrafts. Inside each satellite, the injection of the test masses from the caged configuration into the geodesic trajectory will be performed by the grabbing positioning and release mechanism. To provide a successful injection, the test masses must be dynamically released with a minimal residual velocity against adhesion with the holding device. A parameter that determines the test mass residual velocity is the quickness of the retraction of the holding device. The need arises then to characterize the dynamic response of the release mechanism in order to predict its behaviour in the in-flight conditions. Once a validated model of the mechanism is available, the compliance of the system to the tight requirement on the maximum allowed residual velocity of the test mass may be verified. Starting from an electro-mechanical model of the mechanism dynamics, this paper presents the results of the experimental identification of its relevant parameters.     

基于光固化快速成型技术的测压风洞模型孔道制造与性能评价

传统金属加工制造测压风洞模型存在难度大、周期长、成本高的问题,利用光固化快速成型技术,可以实现测压风洞模型气动外形-内部孔道的一体化成型制造.设计制作了不同孔径、长度的孔道结构模型,对孔道成型质量和孔道结构参数之间以及孔道半径与设计半径之间的关系进行了研究,并对孔道的气密性以及通气性进行了验证.研究得出了可成型的测压模...     

气象卫星地面测试成像终端软件设计与实现

根据气象卫星地面测试对成像终端软件的要求，对成像终端软件的设计与工程实现进行了研究。给出了成像终端软件的接口要求、设计思想、实现方法和可靠性设计等。整星测试结果表明，成像终端软件的设计原理和实现方法合理可行。     

提高动量实验仪测量精度的研究

动量实验仪是验证流体动量方程的重要仪器。国内外常用的动量实验仪测量精度较低，冲击力的测量值与理论计算值偏差Δ值在２２％ 以内。本文介绍了影响测量精度的几个关键性技术问题及其解决方法，研制出一种高精度小型动量仪，将Δ值降至５％ 以内。     

电液伺服疲劳试验机负荷系统失准调整和校准

叙述了美国MTS公司生产的MTS－810（809）系列电液伺服疲劳试验机负荷系统、DC检测器和量程校准模块的原理、调整方法和力值校准方法。