片切磨削方法构造的自由曲面磨削支持系统

以操作者高效准确操作数控磨削中心为目的,开发了自由曲面磨削支持系统,进行了基于球头磨具的磨削中心基础研究。讨论了获得高精度曲面的加工要点,并提出了片切磨削方法。     

Grinding force and surface quality in creep feed profile grinding of turbine blade root of nickel-based superalloy with microcrystalline alumina abrasive wheels

Creep feed profile grinding of the fir-tree blade root forms of single crystal nickel-based superalloy was conducted using microcrystalline alumina abrasive wheels in the present study. The grinding force and the surface quality in terms of surface topography, subsurface microstructure, microhardness and residual stress obtained under different grinding conditions were evaluated comparatively. Experimental results indicated that the grinding force was influenced significantly by the competing predominance between the grinding parameters and the cross-sectional root workpiece profile. In addition, the root workpiece surface, including the root peak and valley regions, was produced with the large difference in surface quality due to the nonuniform grinding loads along the root workpiece profile in normal section. Detailed results showed that the surface roughness, subsurface plastic deformation and work hardening level of the root valley region were higher by up to 25%, 20% and 7% in average than those obtained in the root peak region, respectively, in the current investigation. Finally, the superior parameters were recommended in the creep feed profile grinding of the fir-tree blade root forms. This study is helpful to provide industry guidance to optimize the machining process for the high-valued parts with complicated profiles.     

基于工业机器人的飞机柔性装配技术

研究了基于工业机器人的飞机柔性装配技术,着重讨论了机器人精度补偿、末端执行器设计、法线检测与找正、系统控制、离线编程等关键技术。通过在小翼部件加工中的应用,达到了孔位精度±0.5mm、法向精度±0.5°等关键技术指标。结果表明,对于特定应用对象采用机器人技术进行飞机部件自动装配为一个理想、低成本的解决方案,随着当今工业机器人性能不断增强,配以末端执行器和相关的补偿系统,在航空工业作为装配平台是可行的。     

超高速部分流式切线泵的设计试验研究

提出超高速部分流式切线泵的结构设计和理论计算方法,探讨切线泵的流量系数与喉部面积的关系。最后,通过应用实例总结相关的技术问题。     

难加工材料缓进给磨削加工表面完整性的试验研究

 利用X射线应力仪、显微硬度计、俄歇电子能谱仪、扫描电镜和金相显微镜系统地研究了难加工材料缓进给磨削的表面完整性,讨论了表面粗糙度、冷作硬化、残余应力及其分布、表面层元素的分布以及试件的疲劳性能。 试验表明,缓进给磨削的表面完整性优于铣削和普通磨削。     

凸轮型面加工技术探讨

介绍了一种利用加工中心配备专用磨头磨削凸轮复杂型面的特殊加工方法,研究解决了复杂凸轮型面的仿形加工、计量检测及数控加工编程技巧等问题。     

叶片磨抛机器人力/位混合控制的设计与实现

为提高航空类发动机叶片的自动化磨抛精度,减小复杂曲面叶片加工轨迹控制误差,采用基于六维力传感器的机器人力/位混合控制策略,实现机器人磨抛轨迹的在线修正。搭建以Staubli机器人和ATI六维力传感器为核心部件的叶片磨抛验证平台,通过C++开发上位机,采集磨抛过程中六维力传感器信息并进行Kalman滤波。通过示教确定机器人运动轨迹,对机器人运动轨迹与力传感器信息进行采集分析,确定基于力/位混合控制可以实现机器人运动轨迹的在线修正,为复杂曲面的叶片磨抛轨迹控制提供一种解决方案。     

振动液体磨料研磨去毛刺工艺

采用低频振动液体磨料研磨去毛刺工艺进行了去除微小孔钻削毛刺的试验。试验结果表明,该工艺方法能有效去除毛刺,具有工艺成本低,操作简便等优点,有较高的工程实用价值。     

Specific grinding energy and surface roughness of nanoparticle jet minimum quantity lubrication in grinding

Nanoparticles with the anti-wear and friction reducing features were applied as cooling lubricant in the grinding fluid. Dry grinding, flood grinding, minimal quantity of lubrication（MQL）, and nanoparticle jet MQL were used in the grinding experiments. The specific grinding energy of dry grinding, flood grinding and MQL were 84, 29.8, 45.5 J/mm³, respectively. The specific grinding energy significantly decreased to 32.7 J/mm³ in nanoparticle MQL. Compared with dry grinding, the surface roughness values of flood grinding, MQL, and nanoparticle jet MQL were significantly reduced with the surface topography profile values reduced by 11%, 2.5%, and 10%,respectively, and the ten point height of microcosmic unflatness values reduced by 1.5%, 0.5%,and 1.3%, respectively. These results verified the satisfactory lubrication effects of nanoparticle MQL. MoS₂, carbon nanotube（CNT）, and ZrO₂ nanoparticles were also added in the grinding fluid of nanoparticle jet MQL to analyze their grinding surface lubrication effects. The specific grinding energy of MoS₂ nanoparticle was only 32.7 J/mm³, which was 8.22% and 10.39% lower than those of the other two nanoparticles. Moreover, the surface roughness of workpiece was also smaller with MoS₂ nanoparticle, which indicated its remarkable lubrication effects. Furthermore,the role of MoS₂ particles in the grinding surface lubrication at different nanoparticle volume concentrations was analyzed. MoS₂ volume concentrations of 1%, 2%, and 3% were used.Experimental results revealed that the specific grinding energy and the workpiece surface roughness initially increased and then decreased as MoS₂ nanoparticle volume concentration increased.Satisfactory grinding surface lubrication effects were obtained with 2% MoS₂ nanoparticle volume concentration.     

惯性器件精密零件微小毛刺去除技术研究

针对惯性器件中的外形复杂类零件、通孔交叉孔类零件、特殊材料类零件等微小毛刺去除需求,分析了现有控制工艺方法不足.通过开展高效率、高质量的零件毛刺去除试验,研究了磨粒流去毛刺、磁力研磨去毛刺、强力超声波去毛刺等精密去毛刺新方法对产品质量的影响,分析了先进去毛刺工艺方法的适用性,探索了惯性器件零件去毛刺技术发展方向.