带凹腔的超声速燃烧室燃烧流场数值模拟

对带凹腔结构的燃烧室二维甲烷燃烧流场进行了数值模拟.采用迎风3阶精度MUSCL格式求解二维含组分守恒N-S方程,湍流模型采用剪切修正的RNG k-e湍流模型,分别分析了凹腔不同的长深比和导流槽结构对燃料燃烧的影响;对喷甲烷燃烧工况进行了计算研究.结果表明:凹腔可以提高燃烧效率,却使总压恢复系数降低;凹腔的长深比越高,燃烧效率越高,总压恢复系数越低;在总压恢复系数较高的情况下,采用导流槽可进一步提高燃烧效率.     

小型氢原子频标

介绍了小型主动式氢频标的工作原理、关键技术 ,并给出了目前达到的技术指标 。     

用于光纤F-P声压传感器的直流补偿解调技术研究

提出了一种改进的双腔直流补偿技术，用于解调非本征法布里-珀罗干涉(EFPI)光纤传感器，以消除腔长差与入射光波长相匹配的要求。通过消除直流分量和校准信号相位，可以从具有任意相位差的原始信号中获 得两路正交信号。通过理论仿真，制作了具有不同腔长差的EFPI光纤传感器，对所提出的方法进行了试验验证。 结果表明，该方法在解调双 F P腔 EFPI传感器时，不需要保证初始相位差恒定，且对腔长漂移不敏感，具有良好的 稳定性和实用价值。     

Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

Multi-scale simulation model of air system based on cross-dimensional data transmission method

The Secondary Air System (SAS) plays an important role in the safe operation and performance of aeroengines. The traditional 1D-3D coupling method loses information when used for secondary air systems, which affects the calculation accuracy. In this paper, a Cross-dimensional Data Transmission method (CDT) from 3D to 1D is proposed by introducing flow field uniformity into the data transmission. First, a uniformity index was established to quantify the flow field parameter distribution characteristics, and a uniformity index prediction model based on the locally weighted regression method (Lowess) was established to quickly obtain the flow field information. Then, an information selection criterion in 3D to 1D data transmission was established based on the Spearman rank correlation coefficient between the uniformity index and the accuracy of coupling calculation, and the calculation method was automatically determined according to the established criterion. Finally, a modified function was obtained by fitting the ratio of the 3D mass-average parameters to the analytical solution, which are then used to modify the selected parameters at the 1D-3D interface. Taking a typical disk cavity air system as an example, the results show that the calculation accuracy of the CDT method is greatly improved by a relative 53.88% compared with the traditional 1D-3D coupling method. Furthermore, the CDT method achieves a speedup of 2 to 3 orders of magnitude compared to the 3D calculation.     

卫星大部件二维转台装配工艺方法

为了满足某卫星大部件二维转台在地面重力状态装配后，保证其在轨解锁前精度一致性，提出了二维转台装配工艺优化方法。首先通过模拟载荷配重试验，探索转台星上接口重力下变化规律，保证结构板组合加工偏差，优化卫星层板组合加工工艺方法;其次分析二维转台机构变形，采用卸载装星工装，并对二维转台卸载装配前后关键变形进行精测对比。二维转台通过模拟试验和卸载装配后，保证了地面重力压紧状态和卸载状态下装配精度均在设计指标内，满足卫星二维转台装配要求。通过模拟试验确定结构加工公差余量，在进行卸载装配时，对卸载前后精度精测对比，是卫星大部件载荷装配工艺的正确方法。