粒子拖尾长度对高频DPIV测量误差的影响

基于连续激光源的高采样频率DPIV系统在进行曝光时可能会产生粒子拖尾现象。明渠湍流试验和数值模拟试验结果显示，粒子拖尾长度的增加会导致平均流速减小和湍流强度增大。分析表明，导致平均流速误差的原因之一是诊断窗口边缘局部粒子图像的缺失，且图像缺失程度会随着粒子拖尾长度增加而增大，从而使平均速度随粒子拖尾长度增加而减小；粒子拖尾的另一个直接后果是增大了粒子图像的有效粒径，从而导致湍流强度增大。通过增大第二个诊断窗口的尺寸，进行相关函数标准化和相关系数补偿等方法，可以消除粒子拖尾长度引起的误差。     

富勒襟翼外形的参数化建模及优化

富勒襟翼能够产生比普通单缝襟翼更大的升力增量,而且比双缝和多缝襟翼结构简单、活动部件少,更有利与气动优化,在现代民用飞机上有着越来越多的应用。本文使用二次曲线分段构造富勒襟翼的几何外形,使用SST-k-ω湍流模型对气动网格模型进行数值模拟,以此为基础优化襟翼的几何外形来提高襟翼的升力增量,并对襟翼外形优化前后的计算结果进行了分析。研究结果表明,通过优化富勒襟翼外形,可以提高襟翼头部的吸力峰值,进而提高对主翼环量诱导作用,使得两段翼型的升力系数增加。基于CFD流场显示,可以发现由于襟翼缝道流动对襟翼气流的分离起到抑制作用,因此随着两段翼型迎角的适当增加,反而可以改善襟翼上方气流的分离情况。     

沟槽面湍流边界层湍流度分布

应用激光测速(LDV)技术对沟槽面湍流边界层湍流度分布进行了精细的测量,实验结果表明,在湍流边界层区域沟槽面湍流度最大值比光滑面要小,但出现的位置比光滑面要远.此外,紧靠沟槽面,即y++<4内,沟槽面有较大的湍流度,说明沟槽面有使近壁区流动紊动增加的趋势.对于y/δ≥0.06的区域,湍流度可用u′\u=2.3 exp (-0.9y/δ)描述,而在y/δ<0.06内,则有u′/u =36.4y/δ.     

MHD Spectroscopy of Transonic Flows

In previous publications (Keppens et al.: 2002, Astrophys. J. 569, L121; Goedbloed et al.: 2004a, Phys. Plasmas 11, 28), we have demonstrated that stationary rotation of magnetized plasma about a compact central object permits an enormous number of different MHD instabilities, with the well-known magneto-rotational instability (Velikhov, E. P.: 1959, Soviet Phys.–JETP Lett. 36, 995; Chandrasekhar, S.: 1960, Proc. Natl. Acad. Sci. U.S.A. 46, 253; Balbus, S. A. and Hawley, J. F.: 1991, Astrophys. J. 376, 214) as just one of them. We here concentrate on the new instabilities found that are driven by transonic transitions of the poloidal flow. A particularly promising class of instabilities, from the point of view of MHD turbulence in accretion disks, is the class of trans-slow Alfv’en continuum modes, that occur when the poloidal flow exceeds a critical value of the slow magnetosonic speed. When this happens, virtually every magnetic/flow surface of the disk becomes unstable with respect to highly localized modes of the continuous spectrum. The mode structures rotate, in turn, about the rotating disk. These structures lock and become explosively unstable when the mass of the central object is increased beyond a certain critical value. Their growth rates then become huge, of the order of the Alfv’en transit time. These instabilities appear to have all requisite properties to facilitate accretion flows across magnetic surfaces and jet formation.     

封闭圆柱形粉尘爆炸罐内扬尘诱导湍流特性的确定

采用热线风速仪和系综平均法测定和研究了封闭圆柱形粉尘爆炸罐内扬尘湍流的瞬态特性，并与球形爆炸容器内已测定的扬尘湍流瞬态特性进行了比较，对系综平均法用于扬尘湍流的测量误差与测量次数的关系进行了探讨。     

蜡纸存贮法在高超声速脉冲风洞舵-锥干扰流场显示中的应用

简述了蜡纸存贮法在高超声速脉冲风洞锥—舵干扰流场显示中的应用，给出了迎风面内舵周围干扰区立体和平面展开两种油流谱图，揭示了其三维干扰流动的特征。     

基于LES方法的平板非定常激波/湍流边界层干扰研究

以高超声速发动机进气道湍流分离控制为应用背景,采用大涡模拟(LES)方法进行马赫数为3.0(唇口附近马赫数约为3.0)的激波/湍流边界层干扰(SWTBLI)流场机理研究.利用扰动循环引入的方法,先得到充分发展湍流场,然后根据斜激波关系式引入激波的方法进行激波/湍流干扰模拟.研究结果显示:充分发展湍流场在激波作用下产生逆...     

High-order implicit discontinuous Galerkin schemes for unsteady compressible Navier–Stokes equations

Efficient solution techniques for high-order temporal and spatial discontinuous Galerkin(DG) discretizations of the unsteady Navier–Stokes equations are developed. A fourth-order implicit Runge–Kutta(IRK) scheme is applied for the time integration and a multigrid preconditioned GMRES solver is extended to solve the nonlinear system arising from each IRK stage. Several modifications to the implicit solver have been considered to achieve the efficiency enhancement and meantime to reduce the memory requirement. A variety of time-accurate viscous flow simulations are performed to assess the resulting high-order implicit DG methods. The designed order of accuracy for temporal discretization scheme is validate and the present implicit solver shows the superior performance by allowing quite large time step to be used in solving time-implicit systems. Numerical results are in good agreement with the published data and demonstrate the potential advantages of the high-order scheme in gaining both the high accuracy and the high efficiency.     

湍动能模拟内部声激励的计算研究

为了研究襟翼表面的声激励对多段翼型升力特性的影响机理,利用湍动能假设进行数值计算研究。以湍动能的量值、雷诺数以及襟翼与主翼的搭接量为参数,研究上述参数的变化对升力特性的影响,得到的结果与实验值符合良好。在多段翼型缝道处加入湍动能的影响规律是：（1）在升力特性线性段减少了升力系数,在失速点附近可以推迟分离,提高升力系数;（2）当雷诺数增加时,湍动能对升力系数的影响量减小;（3）在搭接量为零时,湍动能的影响最大。上述规律与在缝道处加入声学激励的影响规律一致,表明采用注入湍动能来类比声学激励有一定的应用价值。     

Scaling of interaction lengths for hypersonic shock wave/turbulent boundary layer interactions

The interaction length induced by Shock Wave/Turbulent Boundary-Layer Interactions (SWTBLIs) in the hypersonic flow was investigated using a scaling analysis, in which the interaction length normalized by the displacement thickness of boundary layer was correlated with a corrected non-dimensional separation criterion across the interaction after accounting for the wall temperature effects. A large number of hypersonic SWTBLIs were compiled to examine the scaling analysis over a wide range of Mach numbers, Reynolds numbers, and wall temperatures. The results indicate that the hypersonic SWTBLIs with low Reynolds numbers collapse on the supersonic SWTBLIs, while the hypersonic cases with high Reynolds numbers show a more rapid growth of the interaction length than that with low Reynolds numbers. Thus, two scaling relationships are identified according to different Reynolds numbers for the hypersonic SWTBLIs. The scaling analysis provides valuable guidelines for engineering prediction of the interaction length, and thus, enriches the knowledge of hypersonic SWTBLIs.