基于BDS-2/BDS-3联合处理的北斗超快速钟差预报优化策略

针对北斗卫星导航系统(BDS)钟差预报产品无法满足高精度快速服务需求的现状，提出了一种基于BDS-2/BDS-3联合估计的超快速卫星钟差预报优化策略。区别于传统两步法预报模型，利用稀疏建模方法一步求解所有模型项，并通过BDS-2/BDS-3星间相关性实现了模型系数解的增强；为进一步降低模型残差的影响，基于残差序列时空相关性，利用半变异函数重构了模型估计的权阵。为验证提出的钟差预报模型，设计了12套对比方案，实验结果表明：基于稀疏建模的钟差模型参数一步估计可略微提高钟差预报精度；通过引入星间相关性对随机模型进行精化，钟差序列一步建模可分别将BDS-2与BDS-3卫星钟差18h预报精度提升28.6%与27.2%；基于半变异函数建模的模型残差相关性提取，可实现BDS-2与BDS-3预报钟差精度8.0%与11.1%的提升。因此，提出的优化策略对当前北斗超快速卫星钟差预报产品精化具有重要意义。     

环境激励条件建筑结构的试验建模研究

通过环境激励模态识别技术对一座中高层新结构大楼环境激励试验建模研究。首先介绍了试验模型设计 ,并在现场测量整栋大楼在环境激励下的振动响应。然后采用新发展的频率空间域方法 ( FSDD)进行模态识别 ,分别在 0～ 4.5 Hz和 0～ 6.5 Hz频率范围识别出 9阶弯曲和扭转模态频率和振型。采用频率空间域方法识别了结构的阻尼特性 ,并得到满意的结果。所得试验模型已成功应用于 CFT大楼的有限元动态模型修正。所研发的试验建模技术可望在结构响应预报 ,健康监测和振动控制中发挥重要作用     

高速风洞引射式进排气动力模拟试验研究

为了测定具有埋入式进气道的某航弹发动机进排气对航弹的气动影响量 ,采用引射式动力模拟器在FL 7高速风洞 ,首次在国内成功地进行了高速风洞进排气动力模拟试验。试验模型缩比为 1∶1 0 ,M =0 .7,P0j/P∞ =2 .62 ,Cφ=0 .79。试验结果表明 ,有动力后XD,CL,CD增加 ,Cma减少。试验表明在高速风洞中对于小尺寸的试验模型 ,采用引射式动力模拟器开展进排气动力模拟试验是一种简便适用的好方法     

钝体燃烧器后能量逆转和紊流参数的数学模拟

本文用非定常数值法研究了钝体燃烧器后的紊流参数分布和能量逆转,并对Boussinesq的雷诺应力模式和双方程k-ε紊流模型提出了改进方案。这样不仅计算出了能量逆转区,而且紊流参数分布也与实验相符。     

三维有限元网格的自动划分

本文作者从研究结构的数学模型入手,讨论了建立三维结构有限元计算模型的方法。成功地获得了一些具有应用代表性的三维板壳和块体结构有限元计算网格的自动划分原理和算法。     

基于BP网络的热工过程模型辨识方法

主要研究了人工神经网络在辨识火电厂热工过程模型中的应用，利用Visual C^ 语言构造BP神经网络,提出了把BP网络权值转换为传递函数的方法，针对火电厂常见的热工过程，不用人为加入特殊的激励信号，只利用现场生产中自然存在的扰动信号进行辨识试验，试验结果准确可靠。     

基于参数化模型和遗传算法的复合材料加筋壁板结构选型优化研究

针对复合材料加筋壁板的结构优化选型问题,采用辅助层压板和添加极小弹性模量材料的复合材料加筋壁板有限元建模方法,应用PATRAN/NASTRAN的参数化建模功能和遗传算法相结合的复合材料加筋壁板的优化方法,对5种复合材料结构形式进行了从2000N/mm到6000N/mm压缩载荷下的结构优化分析。结果表明,当载荷小于4500N/mm时,最有效的加筋壁板结构型式为J型;当压缩载荷大于4500N/mm时,最有效的加筋壁板结构型式为I型。     

Using gamma-ray burst prompt emission to probe relativistic shock acceleration

It is widely accepted that the prompt transient signal in the 10 keV–10 GeV band from gamma-ray bursts (GRBs) arises from multiple shocks internal to the ultra-relativistic expansion. The detailed understanding of the dissipation and accompanying acceleration at these shocks is a currently topical subject. This paper explores the relationship between GRB prompt emission spectra and the electron (or ion) acceleration properties at the relativistic shocks that pertain to GRB models. The focus is on the array of possible high-energy power-law indices in accelerated populations, highlighting how spectra above 1 MeV can probe the field obliquity in GRB internal shocks, and the character of hydromagnetic turbulence in their environs. It is emphasized that diffusive shock acceleration theory generates no canonical spectrum at relativistic MHD discontinuities. This diversity is commensurate with the significant range of spectral indices discerned in prompt burst emission. Such system diagnostics are now being enhanced by the broad-band spectral coverage of bursts by the Fermi Gamma-Ray Space Telescope; while the Gamma-Ray Burst Monitor (GBM) provides key diagnostics on the lower energy portions of the particle population, the focus here is on constraints in the non-thermal, power-law regime of the particle distribution that are provided by the Large Area Telescope (LAT).     

数值模拟方法对NASA CRM模型阻力预测的影响

在复杂工程外形的数值模拟中，网格类型、规模和分布、湍流模型、数值格式等都会不同程度影响模拟结果。如何评估这些模拟方法对模拟结果的影响，并识别对模拟结果影响较显著的因素，对于CFD的发展方向有积极的借鉴指导意义。为了综合研究不同因素对商用运输机外形阻力预测的影响，以AIAA第六届阻力预测会议外形NASA CRM为研究对象，同时考虑了网格、湍流模型、无黏通量格式和体心梯度求解方法等因素对阻力预测的影响。分析中采用枚举法和正交试验设计两种方法，并使用了基于聚类分析的定性敏感性分析方法和基于Mckay主影响分析的定量方法，识别出对阻力预测影响较大的因素，这为数值模拟方法的发展指明了方向。     

Modeling novel methodologies for unmanned aerial systems–Applications to the UAS-S4 Ehecatl and the UAS-S45 Bálaam

The rising demand for Unmanned Aerial Systems(UASs) to perform tasks in hostile environments has emphasized the need for their simulation models for the preliminary evaluations of their missions. The efficiency of the UAS model is directly related to its capacity to estimate its flight dynamics with minimum computational resources. The literature describes several techniques to estimate accurate aircraft flight dynamics. Most of them are based on system identification. This paper presents an alternative methodology to obtain complete model of the S4 and S45 unmanned aerial systems. The UAS-S4 and the UAS-S45 models were divided into four sub-models, each corresponding to a specific discipline: aerodynamics, propulsion, mass and inertia, and actuator. The‘‘aerodynamic" sub-model was built using the Fderivatives in-house code, which is an improvement of the classical DATCOM procedure. The ‘‘propulsion" sub-model was obtained by coupling a two-stroke engine model based on the ideal Otto cycle and a Blade Element Theory(BET) analysis of the propeller. The ‘‘mass and the inertia" sub-model was designed utilizing the Raymer and DATCOM methodologies. A sub-model of an actuator using servomotor characteristics was employed to complete the model. The total model was then checked by validation of each submodel with numerical and experimental data. The results indicate that the obtained model was accurate and could be used to design a flight simulator.