可重复使用航天器再入段复合控制方法研究

可重复使用航天器再入过程初期,反作用力控制系统是其姿态控制的主要手段,结合气动舵面可以减小飞行器对该系统的总冲需求,提高飞行器动态响应特性。给出了反作用力控制系统与气动舵面复合姿态控制系统的组成及三种复合控制指令分配策略,并进行了仿真计算,分析了三种策略的姿态控制效果及总冲需求。仿真结果表明,三种方法均能完成飞行器姿态控制,并各有其优缺点,研究结果为航天器飞行控制系统控制律设计提供了有效参考。     

一种基于ADS-B、WAM和雷达的组合监视方法及其架构

978MHz的广播式自动相关监视系统(ADS-B)技术在通用航空空管领域有广泛应用。中国民航飞行学院在我国首次应用ADS-B系统。从2005年至今,中国民航学院的所有5个机场建立了地面基站,150架飞机加装了机载ADS-B系统,系统运转良好,极大地提高了训练飞行的安全性和空域的利用率。为保证系统数据的精度和完整性,本文介绍了一种方法,即实现多种导航覆盖的ADS-B、广域多点相关系统(WAMLAT)和雷达监视的组合方法,以提高空中交通监视的可靠性,满足空中交通监视所需的导航精度、导航完整性和监视完整性要求。这种综合构型监视方法,将有助于推动多监视源的应用。     

变循环发动机总体结构和模式转换机构研究

根据1种涡扇发动机的总体结构设计方案,围绕变循环特征的适应性进行了改进设计,给出了变循环发动机的总体结构初步方案,设计了模式转换原理及其结构实现方案;以其可调面积涵道引射器的设计为例,进行了模式转换机构运动仿真及其关键件的有限元分析,从机构运动和强度分析方面确定了该方案的可行性.     

Earth observation from space – The issue of environmental sustainability

Remote sensing scientists work under assumptions that should not be taken for granted and should, therefore, be challenged. These assumptions include the following:1. Space, especially Low Earth Orbit (LEO), will always be available to governmental and commercial space entities that launch Earth remote sensing missions.2. Space launches are benign with respect to environmental impacts.3. Minimization of Type 1 error, which provides increased confidence in the experimental outcome, is the best way to assess the significance of environmental change.4. Large-area remote sensing investigations, i.e. national, continental, global studies, are best done from space.5. National space missions should trump international, cooperative space missions to ensure national control and distribution of the data products.At best, all of these points are arguable, and in some cases, they're wrong. Development of observational space systems that are compatible with sustainability principles should be a primary concern when Earth remote sensing space systems are envisioned, designed, and launched. The discussion is based on the hypothesis that reducing the environmental impacts of the data acquisition step, which is at the very beginning of the information stream leading to decision and action, will enhance coherence in the information stream and strengthen the capacity of measurement processes to meet their stated functional goal, i.e. sustainable management of Earth resources. We suggest that unconventional points of view should be adopted and when appropriate, remedial measures considered that could help to reduce the environmental footprint of space remote sensing and of Earth observation and monitoring systems in general. This article discusses these five assumptions in the context of sustainable management of Earth's resources. Taking each assumption in turn, we find the following:(1) Space debris may limit access to Low Earth Orbit over the next decades.(2) Relatively speaking, given that they're rare event, space launches may be benign, but study is merited on upper stratospheric and exospheric layers given the chemical activity associated with rocket combustion by-products.(3) Minimization of Type II error should be considered in situations where minimization of Type I error greatly hampers or precludes our ability to correct the environmental condition being studied.(4) In certain situations, airborne collects may be less expensive and more environmentally benign, and comparative studies should be done to determine which path is wisest.(5) International cooperation and data sharing will reduce instrument and launch costs and mission redundancy. Given fiscal concerns of most of the major space agencies – e.g. NASA, ESA, CNES – it seems prudent to combine resources.     

Solar cycle variation of “killer” electrons at geosynchronous orbit and electron flux correlation with the solar wind parameters and ULF waves intensity

To construct models for hazard prediction from radiation belt particles to satellite electronics, one should know temporal behavior of the particle fluxes. We analyzed 11-year variation in relativistic electron flux (E>2 MeV) at geosynchronous orbit using measurements made by GOES satellites during the 23rd sunspot cycle. As it is believed that electron flux enhancements are connected with the high-speed solar wind streams and ULF or/and VLF activity in the magnetosphere, we studied also solar cycle changes in rank order cross-correlation of the outer radiation belt electron flux with the solar wind speed and both interplanetary and on-ground wave intensity. Data from magnetometers and plasma sensors onboard the spacecraft ACE and WIND, as well as magnetic measurements at two mid-latitude diametrically opposite INTERMAGNET observatories were used. Results obtained show that average value of relativistic electron flux at the decay and minimum phases of solar activity is one order higher than the flux during maximum sunspot activity. Of all solar wind parameters, only solar wind speed variation has significant correlation with changes in relativistic electron flux, taking the lead over the latter by 2 days. Variations in ULF amplitude advance changes in electron flux by 3 days. Results of the above study may be of interest for model makers developing forecast algorithms.     

变循环发动机建模方法研究及验证

研究了变循环发动机(VCE)关键部件建模技术.采用叶尖叶根分段建模技术建立了两段风扇的数学模型,使之更适用于VCE.基于流场分析,建立了活门开度、外涵道进口总压、动压与外涵道总压恢复系数之间的智能映射,完善了外涵道模型.建立了VCE部件共同工作方程,获得了VCE部件级数学模型.基于欧洲空间与推进系统仿真数据库进行设计点计算,并开展了仿真验证.仿真结果表明:建立的数学模型表现出的工作性能与实际发动机实验结果一致,在低马赫数下双外涵道模式推力更大、耗油率更低;相反在高马赫数下单外涵道模式推力及耗油率优于双外涵模式,验证了所采用建模方法的有效性.      

基于模型的载人航天器研制方法研究与实践

载人航天器具有系统规模大、技术难度高、单件小批量、无法通过多次飞行持续完善设计、可靠性要求高等特点。当前载人航天器研制中仍存在着参数化和模型化程度不高、基于模型的系统综合仿真验证不足、研制各环节缺乏数字化集成等问题,传统基于文本的系统工程方法已无法满足研制需求,亟需采用基于模型的系统工程方法。本文针对载人航天器的研制现状和应用需求,提出了面向载人航天器全生命周期的模型体系,定义了需求模型、功能模型、产品模型、工程模型、制造模型、实做模型等六类模型,提出了基于模型的研制流程,包含系统设计闭环验证、产品设计闭环验证、实做产品闭环验证3个验证环节,并深入探索了各研制环节中不同模型间的传递与关联关系。以某型号载人航天器为应用基础,系统地验证了提出的方法。     

某膨胀循环发动机推力室冷却结构流场仿真分析

为了研究某膨胀循环氢氧发动机推力室冷却结构流场分布特性,进行了单根冷却通道和完整冷却通道结构的三维CFD分析。仿真计算过程中,以单根通道模型的仿真结果作为完整通道结构模型流场仿真分析的边界条件之一,并考虑了材料物性参数随温度或压力的变化。分析结果表明:1)仿真预测的温升、压降与热试验实测值吻合,该推力室冷却通道流量相对偏差范围为-4.8%~6.6%,由此造成喉部气壁温的环向偏差为33 K;2)集合器管内流体的环向流动压差、法兰起分流或汇聚作用时拐弯效应形成的压力波动是造成冷却通道流量不均匀分布的主要原因,出口集合器内的压力分布对通道流量分布起主要作用;3)提高通道流量均匀性的措施可以从增大出口集合器管径或采用变管径设计、采用扩口型法兰并设置弧形导流片、集合器的进、出口法兰布置在同一环向位置等方面进行考虑。     

基于偏最小二乘回归分析的装备研制费用估算方法及应用

介绍了寿命周期费用的概念以及各阶段分布情况;针对经典回归分析的不足,采用偏最小二乘回归分析对某装备样本数据进行分析建模;建立了研制费用与几个相关指标的回归方程,并将估算结果与经典的回归分析进行对比,验证模型的合理性。该模型能较好地反映了费用与各指标之间的关系,对后续寿命周期费用的分析与控制有一定的意义。     

2024-T3铝合金孔板高低周复合疲劳试验研究

对2034-T3铝合金孔板试件进行了高低周复合疲劳性能试验,研究高低周循环次数比对复合疲劳寿命的影响,建立了高低周循环次数和应力幅比与高低周复合疲劳寿命之间的关系式,并对现有损伤累积模型的适用性进行了分析讨论。试验和分析结果表明：随着高低周循环次数增大,复合疲劳寿命有显著的降低,复合疲劳寿命与高低周循环次数比呈对数线性关系。现有的累积损伤准则对试验结果的预测偏于危险,非线性累积损伤准则优于线性累积损伤准则。