Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

Study on the breakup lengths of free round liquid jets

IntroductionBreakup and atomization of roundliquidjetshad been widely used in internal combustion en-gines,gas turbines,and liquid rocket engines.Recently,with the development of scramjet en-gines and the deepening of fuel atomization re-search,it attract…     

基于网格变形技术的涡轮叶片变形传递

为实现学科耦合,需要在涡轮叶片多学科设计优化的气动模型和结构模型之间传递温度、气压和变形等载荷.研究结构变形向气动网格传递的实现方法.参数空间插值方法解决耦合面网格不一致时的变形插值问题;网格变形技术用来调整气动网格内部节点的位置,保证变形传递后的网格质量.某涡轮叶片变形传递实例的表明:该方法能够用于多学科设计优化问题中的变形传递.      

GEO卫星热控涂层αS退化空间综合环境模拟试验

文章用综合低能辐照试验模拟15年地球同步轨道环境对热控材料S781白漆、SR107-ZK白漆、镀银FEP、OSR片的太阳吸收率退化趋势。有机白漆有严重退化,而OSR和 镀银FEP材料退化较少。通过与飞行试验结果比较,证明了本次模拟试验的有效性。通过利用退化趋势的试验数据,应用最小二乘法获得退化数学模型。二次指数退化模型与4种材料退化曲线符合较好。更长试验时间结果可以通过数学模型外推的方法获得。经试验验证,用8年试验数据外推15年数据误差不超过1%。     

双太阳翼GEO卫星在轨角动量管控方法

地球同步轨道(GEO)卫星在轨的主要环境干扰力矩为太阳光压力矩和重力梯度力矩,干扰力矩的累积效应表现为飞轮转速的变化,需要通过外力矩进行角动量卸载避免飞轮饱和。由于GEO磁场极弱,卫星无法使用磁力矩卸载,只能通过喷气卸载,而喷气将对卫星轨道产生影响,因此需要尽可能延长卸载周期。针对配置双对称太阳电池阵GEO卫星的角动量管控需求,首先建立卫星在惯性空间中角动量积累模型,并映射到卫星本体系中,得到本体系中的角动量变化规律。通过飞轮在轨转速遥测数据,精确辨识获取环境干扰力矩特征参数,获得真实可靠的干扰模型。以角动量卸载周期最长为原则,基于在轨环境干扰模型制定角动量管控策略,并准确预估下次角动量卸载时间。经在轨数据处理与分析表明:提出的角动量管控策略,可有效将飞轮的角动量卸载周期提升为原来的2倍,有效提升卫星在轨应用效能,具有实际工程意义。     

一种基于余数周期的 PRI精确估计算法

针对传统脉冲重复间隔（PRI）分选算法在估计PRI方面存在的不足,提出了一种对PRI周期信号的周期进行精确估计的算法。该算法首先从待分选脉冲序列中提取出属于一部雷达的脉冲样本,然后利用同余方程的余数周期性质对该雷达脉冲序列的PRI进行精确的估计。相对于传统的PRI估计算法,该算法有效地消除了TOA量化误差对PRI估计造成的影响,可以精确地估计出雷达脉冲序列的准确 PRI数值,从而能够更好地满足信号分选算法的处理需求。理论推导及仿真实验均表明了该算法的有效性。     

Earth observation from space – The issue of environmental sustainability

Remote sensing scientists work under assumptions that should not be taken for granted and should, therefore, be challenged. These assumptions include the following:1. Space, especially Low Earth Orbit (LEO), will always be available to governmental and commercial space entities that launch Earth remote sensing missions.2. Space launches are benign with respect to environmental impacts.3. Minimization of Type 1 error, which provides increased confidence in the experimental outcome, is the best way to assess the significance of environmental change.4. Large-area remote sensing investigations, i.e. national, continental, global studies, are best done from space.5. National space missions should trump international, cooperative space missions to ensure national control and distribution of the data products.At best, all of these points are arguable, and in some cases, they're wrong. Development of observational space systems that are compatible with sustainability principles should be a primary concern when Earth remote sensing space systems are envisioned, designed, and launched. The discussion is based on the hypothesis that reducing the environmental impacts of the data acquisition step, which is at the very beginning of the information stream leading to decision and action, will enhance coherence in the information stream and strengthen the capacity of measurement processes to meet their stated functional goal, i.e. sustainable management of Earth resources. We suggest that unconventional points of view should be adopted and when appropriate, remedial measures considered that could help to reduce the environmental footprint of space remote sensing and of Earth observation and monitoring systems in general. This article discusses these five assumptions in the context of sustainable management of Earth's resources. Taking each assumption in turn, we find the following:(1) Space debris may limit access to Low Earth Orbit over the next decades.(2) Relatively speaking, given that they're rare event, space launches may be benign, but study is merited on upper stratospheric and exospheric layers given the chemical activity associated with rocket combustion by-products.(3) Minimization of Type II error should be considered in situations where minimization of Type I error greatly hampers or precludes our ability to correct the environmental condition being studied.(4) In certain situations, airborne collects may be less expensive and more environmentally benign, and comparative studies should be done to determine which path is wisest.(5) International cooperation and data sharing will reduce instrument and launch costs and mission redundancy. Given fiscal concerns of most of the major space agencies – e.g. NASA, ESA, CNES – it seems prudent to combine resources.     

SSPS-OMEGA超大型球形聚光器结构拓扑构型与设计

为同时兼顾千米量级尺度空间太阳能电站聚光系统的在轨发射安装难度、光学收集效率、稳定性及结构工艺等多方面的因素,提出采用基于球面正多面体的经纬线划分法模块化构建球形聚光器。该方法不仅可实现基础划分单元分布均匀、规格种类少,降低在轨构建与运载发射难度。而且只要合理控制弧高等分数和基础划分单元的口径就可以同时保证聚光系统的光学收集效率。理论与仿真结果显示,当弧高等分数为24时,该划分法共有25种基础单元件,整个球面被分成5762块。并且此时模块化构建的实际球形聚光器的光学收集效率与理想球面相比基本保持不变,解决了太阳能电站聚光系统设计中存在的关键问题。     

飞行器智能设计愿景与关键问题

未来飞行器正朝着多元化、无人化和智能化的方向发展,高超声速、超隐身和变体等新型飞行器不断涌现。而传统飞行器解耦分拆的设计方法越来越难以满足未来飞行器综合性能全面提升的要求,只有通过整体化设计才能充分发掘飞行器的潜能。通过分析传统飞行器设计中存在的问题,提出满足全生命周期要求的飞行器智能设计体系理念,利用知识库的构建将智能赋予飞行器平台系统设计、制造生产和运维这3个阶段,并通过数字孪生技术进行飞行器全生命周期的仿真、分析和预测,以对飞行器设计、运行等数据进行更新,使该体系形成闭环。就飞行器智能设计体系中需要的关键技术及涉及的科学问题等进行了讨论,并给出了未来发展方向以供参考。     

SABRE预冷器计算模型及其在整机模型中的应用

预冷器的性能对SABRE等预冷组合循环发动机具有重要影响,为实现发动机方案设计阶段预冷器的快速设计与评估,建立了预冷器准二维快速评估模型。将SABRE预冷器的几何结构简化为一个扇环形区域,沿径向和周向将该区域划分为二维节点。应用守恒方程及传热关联式完成单个节点计算,再求解节点矩阵的平衡方程组,计算内外流体特定节点上参数的二维分布,得到预冷器出口参数。将模型嵌入发动机总体性能程序中,实现了发动机设计及非设计点的预冷器性能计算的功能。与文献数据对比结果表明,预冷器模型传热计算误差小于5%,摩擦阻力误差小于10%。整机计算结果显示,Ma0~5范围内,预冷器空气侧温降范围为143K至932K,温降随飞行马赫数升高单调上升。预冷器传热有效度范围为0.896-0.945,空气侧总压恢复系数范围为0.852-0.904。