Unsteady analysis of jet impingement under vibration conditions

The vibration of thermodynamic machinery will affect its cooling system. In this research, a high-resolution simulation of jet impingement was performed to quantify the unsteady turbulent convection under vibration conditions. A newly developed Self-Adaptive Turbulence Eddy Simulation(SATES) method was used. The Reynolds number was Re = 23000, the jet-towall distance was fixed at H/D = 2, and the vibrating frequency of the impinging wall f varied from 0 to 200 Hz. Compared with the static wall c...     

Aerodynamic characteristics of store during lateral jet assisted separation from cavity using free drop technique

Aimed at the problem of store separation from internal cavity, this paper innovatively puts forward a separation scheme of using lateral jet to assist store safe separation. The jet ensures that the store is continuously subjected to down head moment during separation, so as to ensure safe separation. The wind tunnel free drop test technique with lateral jet is established, which can ensure that there is no support interference in the motion process of the store and more truly simulate the motio...     

1种节能环保带喷射泵的排气引射器设计方案

提出了1种新式带喷射泵的排气引射器设计方案。通过计算表明，在高空模拟试验台中应用带有喷射泵的引射器，可以将湿燃气中的水蒸气冷凝分离出来，减少次流流量，降低排气温度，大幅度提高燃气总压，从而提高引射系数，并可实现无污染排放。     

固液捆绑火箭上升过程喷流干扰特性及底部热环境研究

固体喷流和液体喷流的来流与喷流之间相互干扰，在喷流交汇碰撞区域使流场温度、压力特性发生变化，对箭体底部的加热效应增强。特别是含有固体颗粒的固体助推器喷流与液体芯级喷流混合，对传热特性产生明显影响。本文用连续相模型模拟气相、离散相模型(DPM)模拟固体粒子相、DO模型模拟含有固体粒子的介质辐射，对固液捆绑火箭在上升飞行过程中的气固两相喷流的演变过程进行仿真研究。仿真结果表明:在不同的发动机组合之间出现高温区域，并随着喷流扩张和飞行高度增加，高温区向箭体底部移动，喷流中小粒径固体颗粒分布在喷流与空气的边界混合层区域，大粒径固体颗粒分布在喷流交互中心区域，底部最大对流热流密度与辐射热流密度为90 kW/m²和400 kW/m²。将仿真实验结果与飞行试验数据进行了对比分析，发现两者吻合较好，验证了仿真结果的准确性。     

Radially loading rotary extrusion for manufacturing large-size conical cylinders with inner transverse high ribs

The Large-size Conical Cylinders with Inner Transverse High Ribs (LCCWITHR) can reduce the weight of the parts while maintaining high rigidity and strength. Radially Loading Rotary Extrusion (RLRE) forming technology can achieve integral forming of LCCWITHR through the synergy of radial and rotary movements of dies. The flow law of the material during the forming process is the key to forming large-size inner ribs. At present, there is no unified understanding of the metal flow law of RLRE forming technology. An analytical expression was derived to predict the Radial Direction (RD) deformation loads. The FE simulation and process experiment were carried out to investigate the effects of the inclination angle, thickness factor and transition arc radius of the split top dies on the spacing of the metal diversion plane, the metal flow velocity of the rib area and the final radius of the inner rib. The influence of the split top dies loading distance and the bottom die rotation angle of each pass on the inner radius of the inner rib was verified. And the optimal combination of dies shape parameters and loading paths which can make the metal flow orderly was obtained: the inclination angle is 140°, the thickness factor is 3.64, the transition arc radius is 16 mm; the top dies loading distance is 15 mm, the bottom die rotation angle is 45°. The FE simulation results have been found to be in close agreement with physics experiment. The research results reveal the metal flow law of rib growth in the RLRE of LCCWITHR, which lays a theoretical foundation for subsequent thorough research and process optimization.     

双层壁冷却结构中多排射流冲击冷却的换热和流阻特性

采用稳态热敏液晶技术对双层壁冷却结构中的多排(包括顺排和叉排)射流冲击冷却结构进行了风洞实验,同时结合数值模拟的方法,对两种射流冲击冷却结构的传热和流阻特性的差异进行了研究.实验结果表明:流量系数和冲击靶板上的努塞尔数均随着雷诺数的增大而增大,而冲击孔的排布方式对面平均努塞尔数的影响较小,但是叉排结构的流量系数高于顺排...     

低温液体火箭燃烧室内射流雾化研究进展

从理论、实验和数值计算方面，阐述和总结了低温推进剂射流雾化的研究现状和进展。对射流雾化机理及形态进行了分类，重点从对比常温流体与低温流体射流雾化特征参数不同的角度，梳理了射流雾化方面的数值研究方法，并介绍了低温射流雾化的相关实验研究。结果表明:空气扰动破碎机理仍是最广为接受的理论，而超临界工况下射流雾化形态不符合现有的射流雾化分类；数值计算方法逐渐由流体体积法和水平集法向直接数值模拟转变，对闪蒸现象的建模是研究重难点之一；低温流体射流喷雾实验数据匮乏，需通过丰富测量手段，提高测量精度的途径获得完整、准确的实验数据。      

加工装配误差影响下偏转射流压力伺服阀静态特性分析

电液压力伺服阀是电液压力伺服控制系统的核心控制元件，广泛应用于航空、航天、军事等领域。区别于流量伺服阀，压力伺服阀在滑阀放大器的设计上多采用带有压力控制容腔的三通阀结构，不同的滑阀结构使得现有的偏转射流流量伺服阀仿真模型难以满足压力伺服阀性能预测的需求。本文基于AMESim平台建立了偏转射流压力伺服阀的仿真模型，并通过实验对仿真模型进行了验证，验证结果表明仿真模型能够准确地描述压力伺服阀的静态特性。最后，通过仿真模型分析了加工装配误差影响下压力伺服阀输出性能差异，仿真结果可为偏转射流压力伺服阀的性能预测和结构设计提供参考。