基于传动性能和垂直轮位的弧齿锥齿轮齿面设计

根据齿面印痕的位置、方向及传动误差幅值的要求,在齿面上设计三个啮合点,通过对这三个啮合点的控制,达到对齿面啮合质量的全程控制.为了满足不同的加工要求,在此基础上,按照给定的垂直轮位的值对小轮加工参数进行再设计,保证传动误差的幅值不变且接触迹线仅有较小的改变.最后分别用该方法和美国Gleason公司的软件设计一对齿轮,并进行齿面印痕、传动误差和齿面对比,两种设计是基本一致的.      

Aero-optical effects simulation technique for starlight transmission in boundary layer under high-speed conditions

Aero-optical effects for starlight transmission in the high-speed flow field will reduce the accuracy of the star sensor on an aircraft. Numerical simulations for aero-optical effects usually require plenty of calculations, which cause difficulties when designing a celestial navigation system for a high-speed aircraft. In this study, an Aero-Optical Simulator For Starlight Transmission (AOSST) in the boundary layer is developed. It effectively reduces the computational burden compared to that of the widely used CFD simulation, and it achieves satisfactory accuracy. In this simulator, gas ellipsoids satisfying certain design rules are used to simulate coherent density structures in boundary layers. Design rules for the gas ellipsoids are found from published experimental and high-fidelity CFD simulation results. The generated wavefront distortion by AOSST is anchored with the scale law for aero-optical distortion in the boundary layer by determining some control parameters, which enables the simulator to output reliable results over a wide range of flight states. Four numerical examples are provided to verify the performance of AOSST. The results demonstrate that AOSST is able to simulate the directional dependence of aero-optical distortions in boundary layers, the variation trend of distorted wavefront shapes with Reynolds number, and the grayscale distribution on the disturbed star map.     

CCPT系统中基于副边阻抗调制技术的反向信号与能量叠加传输技术研究

为了解决金属环境条件下的无线供电和信号传输需求，提出了一种基于电容耦合方式的无线能量和信号并行传输方案。通过建立E类放大器的数学模型，分析电容耦合系统的传输特性和阻抗影响机理，设计了适用于E类放大器结构的调制与解调电路，并通过仿真验证了电路的可行性，为CCPT系统从能量传输到信号回传提供了系统性的理论指导。     

Best practices for model-based and simulation-aided engineering of power transmission and motion control systems

This paper deals with the modelling and simulation of aircraft systems, in particular for power transmission and control. It is intended to review, propose and disseminate best practices for making model-based/simulation-aided engineering more efficient at any phase of the system life cycle. The proposals are aimed at creating value, not only by increasing the performance of the product under study but also by shortening the time to market, capitalizing knowledge, mitigating risks and facilitating concurrent engineering. The needs associated with the engineering activities are firstly identified to define a set of requirements for the models. Then, these requirements are used to drive the considerations leading to model development, focusing in particular on the process, modelled physical effects, modelling level, model architecting and concurrent engineering. The third part deals with the model implementation, giving special consideration to the different types of models, causalities, parameterization, implementation and verification. Each part is illustrated by examples related to safety critical actuators.     

卫星通信全代理同态可信传输机制研究

卫星通信及应用已经成为当前社会生活的重要组成部分。为了解决卫星通信数据安全传输、信息隐私保护、接收端信息依赖等问题，基于低轨卫星气象数据传输的典型应用场景，提出了一套全代理同态加密传输模型（FPRM），并依据卫星通信系统架构将其实例化，从而设计卫星通信全代理同态可信传输系统与运行机制。该机制增加系统的通信安全和隐私保护，实现密文的可计算和传输全代理，有效融合卫星、商业数据中心以及互联网资源，降低运行成本，提高资源利用率，具有重要的实际意义和应用价值。最后，通过试验证明该模型的性能和数据扩展性具有可行性。     

具有时变刚度传动误差及间隙的齿轮系统动力学分析

建立了 ４ 自由度的直齿圆柱齿轮系统的非线性动力学方程。该方程包含了时变啮合刚度、传动误差及间隙。利用齿轮结构的旋转对称性,提出了用一个啮合齿对上的参数表示其它啮合齿对上参数的方法。为了求解方程,提出了一种有效的数值方法——基于打靶法的局部参数化延拓法。该方法不但能够得到非线性振动微分方程的周期解,而且特别适合处理含奇异点的非线性特征值问题。最后给出了一个数值计算示例。     

频率选择表面(FSS)柔性屏铺覆工艺对透波窗口透波性能的影响

为了研究工程中柔性FSS屏铺覆工艺对透波窗口通带插损的影响,设计并制备了几种不同工艺缺陷的平板,采用自由空间传输反射法研究了平板在不同入射角下的通带损耗.结果 表明:拼接缝隙使通带损耗在0°和60°入射角下增加了0.3dB;拼接褶皱使通带损耗在0°入射角下增加了0.77 dB,在60°入射角下增加了1.55 dB;多层...     

空间太阳能电站的关键技术及发展建议

1968年美国的P. Glaser博士最早提出空间太阳能电站（SSPS）概念构想。作为一个巨大的空间系统,空间太阳能电站的技术难度非常大,其真正实现预计还需要几十年的时间。文章通过对国外典型空间太阳能电站概念及其关键技术进行比较分析,在此基础上初步提出空间太阳能电站关键技术体系和发展建议。     

高效率远距离激光无线能量传输方案设计

为了提高激光传能的电到电转化效率,文章设计了一种激光传能系统,采用相位阵列提高光束接收端光强分布的均匀度同时提高激光发射端与光束接收端之间的瞄准精度,优化了光电池排列设计,增大了光电池对激光束的接收效率及光电转换效率,从而提高了激光传能的电到电转换效率。     

空间太阳能电站的激光无线能量传输技术研究

以空间太阳能电站为研究背景,通过对大功率激光发射、高效激光能量接收、高功率激光光束控制等关键技术的研究,提出了一种可用于空间太阳能电站的激光无线能量传输系统,可为未来空间太阳能电站的建设和应用提供技术支撑和方法储备,同时也可为我国空间科学研究及新能源应用提出了一种安全、高效、先进的技术手段。