基于无线激光通信的转子参数遥测方法研究

为了满足航空发动机转子、直升机旋翼等旋转部件动态参数的高速实时采集需求,提出了一种基于无线激光通信的旋转部件非接触参数遥测方法,并给出了基于该方法的参数遥测系统总体方案.重点研究了光电数据传输通道中发射激光器的信号驱动、光电探测器的信号放大及串行/解串器等关键电路的设计方法.设计了理论最大传输速率达622 Mb/s的无线激光通信收发模块,并测试了收发模块的实际性能.最后,研制了参数遥测试验样机,该样机在旋转状态下的数据传输率达300 Mb/s,满足航空发动机转子的动态参数遥测要求.      

月面钻取采样回转齿轮副啮合生热试验研究

针对月面钻取采样装置的回转齿轮副啮合热进行理论分析,依据辐射换热定律建立了理论温升模型;模拟实际月面真空、带载工况并开展试验研究。分析了啮合热在月面高真空环境的制约条件下,向机体外传播的方式、传热途径以及散发不畅时的积聚作用对附近运动副工作特性的影响。研究结果表明：回转齿轮副作为钻具驱动单元动力传递的中间环节,在20Nm负载转矩工况下持续运行40分钟,理论预测最大温升28.66℃,与试验测量的最大温升结果28℃相吻合,充分验证了钻进驱动单元热设计的正确性,准确地识别出回转齿轮副啮合热积聚的潜在风险。     

Design of face-hobbed spiral bevel gears with reduced maximum tooth contact pressure and transmission errors

The aim of this study is to define optimal tooth modifications, introduced by appropriately chosen head-cutter geometry and machine tool setting, to simultaneously minimize tooth contact pressure and angular displacement error of the driven gear (transmission error) of face-hobbed spiral bevel gears. As a result of these modifications, the gear pair becomes mismatched, and a point contact replaces the theoretical line contact. In the applied loaded tooth contact analysis it is assumed that the point contact under load is spreading over a surface along the whole or part of the ’’potential’’ contact line. A computer program was developed to implement the formulation provided above. By using this program the influence of tooth modifications introduced by the variation in machine tool settings and in head cutter data on load and pressure distributions, transmission errors, and fillet stresses is investigated and discussed. The correlation between the ease-off obtained by pinion tooth modifications and the corresponding tooth contact pressure distribution is investigated and the obtained results are presented.     

基于混沌序列加权抽样和排序变换的图像置乱

为增强网络中传输的数字图像信息的安全性,对一类典型的基于混沌排序图像置乱算法——Ye算法进行了研究,给出应用间隔抽样混沌序列置乱图像可以提高混沌排序置乱算法置乱度这一性质,并依据近似熵理论给出其提升的依据.为增加图像置乱算法的密钥空间,结合Shannon加权保密思想,设计了基于加权抽样混沌序列排序图像置乱算法.结果表明,该方法密钥空间大,置乱强度高,抗重构攻击.     

星地遥感数据压缩的差分编码方法研究

为了提高星地传输的工作效率,文章以信息论为理论基础,提出一种差分编码方法用于星地遥感数据的传输。同时,鉴于地表覆盖本身的不确定度与应用需求的不同,提出了分区预测差分编码与保持立体测量精度的差分编码。这两种压缩策略可进一步显著提高差分编码的压缩比。     

管式间接蒸发冷却器换热管的亲水性

对管式间接蒸发冷却器在应用过程中存在的换热管表面亲水性较差的问题进行分析,介绍亲水性的表征方法,分析亲水涂膜需要具备的性能,并详细介绍了三种亲水涂膜各自的特点及亲水机理。提出采用亲水溶液对铝箔表面进行亲水整理的方法来提高其亲水性,结果显示经过亲水处理后铝箔表面亲水性和持续亲水性都大大提高。     

民机机翼千斤顶顶升装置分析

千斤顶顶升情况是民用飞机在进行维修、更换零部件时必须考虑的一个状态。对民机顶升的相关适航条款进行了理解;对B737及A320的机翼顶升装置进行了总结对比,通过传力分析,比较了其优缺点。两种机型的传力方式稍有不同：B737机翼顶升载荷的垂直分量由加强肋承担主要传递到前梁,水平分量通过挤压由下壁板承担;A320机翼顶升载荷...     

基于传动误差和齿面印痕控制的弧齿锥齿轮小轮加工参数的设计(英文)

This paper proposes a new approach to design pinion machine tool-settings for spiral bevel gears by controlling contact path and transmission errors. It is based on the satisfaction of contact condition of three given control points on the tooth surface. The three meshing points are controlled to be on a predesigned straight contact path that meets the pre-designed parabolic function of transmission errors. Designed separately, the magnitude of transmission errors and the orientation of the contact path are subjected to precise control. In addition, in order to meet the manufacturing requirements, we suggest to modify the values of blank offset, one of the pinion machine tool-settings, and redesign pinion ma- chine tool-settings to ensure that the magnitude and the geometry of transmission errors should not be influenced apart from minor effects on the predesigned straight contact path. The proposed approach together with its ideas has been proven by a numerical example and the manufacturing practice of a pair of spiral bevel gears.     

一种AMR磁罗盘的误差建模与校准方法

针对传统磁罗盘硬磁校准时容易受到外界干扰,标定校准为相对值的问题,详细分析了AMR(Anisotropic Magneto Resistance,各向异性磁阻效应)磁罗盘的系统误差并建立其误差模型,提出了标量校准方法用于磁罗盘的硬磁标定校准.与传统方法相比,该方法不需要确切的航向参考值,利用任意多位置下的大量测试数据通过迭代求取校准参数的最优解,通过施加约束避免校准过程中磁干扰的影响,并且校准值为绝对矢量.经过硬磁校准,磁罗盘航向精度提高7倍.实验结果验证了该方法的有效性和实用性.     

高温环境对振动测试信号传输参数的影响

为了研究发动机试车运行时高温环境对振动特性测试信号传输参数的影响, 利用电磁场-热耦合理论, 探讨了温度场对电磁场各场量的影响.结合实际测试传输网络, 提出了一种能有效提取多导体传输参数的传输电路法.该方法用经典的能量法进行了验证, 取得了很好的一致性.电阻和电感参数均随环境温度的升高而增加, 且电阻受温度影响的变化幅度尤为明显.多输出响应时多导体的邻近耦合响应随温度升高而加剧, 互电参数受温度和导体间距的影响明显.