高转速大长径比传动杆动态特性研究

大客发动机径向传动杆具有长径比大、转速高等特点.为保证传动杆可靠工作,需进行精确的动态特性分析,而边界条件的选取和简化是保证传动杆动态特性准确性的关键.分别使用了简化模型和整体模型计算了传动杆的模态,通过边界条件的选取设置,对传动杆进行了动态特性分析和试验验证,并与试验结果进行了对比.结果显示,使用整体模型计算得到的传动杆模态振型与试验结果较为一致,证明了传动杆边界条件选取方法的正确性.     

Robust Navier-Stokes method for predicting unsteady flowfield and aerodynamic characteristics of helicopter rotor

A robust unsteady rotor flowfield solver CLORNS code is established to predict the complex unsteady aerodynamic characteristics of rotor flowfield. In order to handle the difficult problem about grid generation around rotor with complex aerodynamic shape in this CFD code,a parameterized grid generated method is established, and the moving-embedded grids are constructed by several proposed universal methods. In this work, the unsteady Reynolds-Averaged Navier-Stokes(RANS) equations with Spalart-Allmaras are selected as the governing equations to predict the unsteady flowfield of helicopter rotor. The discretization of convective fluxes is accomplished by employing the second-order central difference scheme, third-order MUSCL-Roe scheme, and fifth-order WENO-Roe scheme. Aimed at simulating the unsteady aerodynamic characteristics of helicopter rotor, the dual-time scheme with implicit LU-SGS scheme is employed to accomplish the temporal discretization. In order to improve the computational efficiency of holecells and donor elements searching of the moving-embedded grid technology, the ‘‘disturbance diffraction method" and ‘‘minimum distance scheme of donor elements method" are established in this work. To improve the computational efficiency, Message Passing Interface(MPI) parallel method based on subdivision of grid, local preconditioning method and Full Approximation Storage(FAS) multi-grid method are combined in this code. By comparison of the numerical results simulated by CLORNS code with test data, it is illustrated that the present code could simulate the aerodynamic loads and aerodynamic noise characteristics of helicopter rotor accurately.     

一种翼身融合飞行器的失速特性研究

翼身融合（BWB）布局飞行器作为下一代商用飞机的主要构型之一，越来越受到重视。对于翼身融合飞行器的研究主要针对其巡航状态的特性，而对其失速特性的研究较少。对一种翼身融合客机构型进行风洞试验研究，采用测力试验方法对其无增升装置的构型，以及具有翼梢小翼、前缘缝翼和机身上部双吊舱的组合部件构型下的纵向特性进行研究，特别是对其失速特性的分析，并通过二维粒子图像测试技术以及油流试验对其失速过程的流动机理进行研究。结果表明，无增升装置的基本构型下，翼身融合飞行器可以保持低速飞行，而各组合构型都具有提高最大升力系数的作用。对失速过程的分析表明，随着迎角的增大，飞机表面流场分离区域从翼梢开始逐渐向翼根以及机身发展，当外翼段完全处于分离区域时，飞机并不会马上失速，因为中心体同样具有提供升力的作用，且中心体的流动分离较外翼的流动分离更晚，所以当外翼在失速迎角出现升力损失时可以通过中心体的升力进行补偿，维持其低速飞行状态，真正的失速发生在中心体出现流动分离之后。     

Factors influencing the acoustic characteristics of the reverberation chamber

Main factors influencing the characteristics of the acoustic reverberation chamber are considered. Studies of mode density and calculation of required acoustic power are carried out from the relations of the RK-600 chamber dimensions depending on technical requirements for the ground-based experimental development of communication space vehicles (SV).     

Case studies of height structure of TID propagation characteristics using cross-correlation analysis of incoherent scatter radar and DPS-4 ionosonde data

The height structure of TID characteristics is studied on the base of the electron density profiles measured by two beams of the incoherent scatter radar and DPS-4 ionosonde. The height profiles of the TID propagation characteristics are obtained by means of cross-correlation and spectrum analysis of the radar and ionosonde data. The noticeable height variability of the TID parameters is observed. The variability is explained by interference of several TIDs. The obtained TID propagation characteristics are compared with known results of the TID studies.     

Quality characteristics of the radish grown under reduced atmospheric pressure

This study addresses whether reduced atmospheric pressure (hypobaria) affects the quality traits of radish grown under such environments. Radish (Raphanus sativus L. cv. Cherry Bomb Hybrid II) plants were grown hydroponically in specially designed hypobaric plant growth chambers at three atmospheric pressures; 33, 66, and 96 kPa (control). Oxygen and carbon dioxide partial pressures were maintained constant at 21 and 0.12 kPa, respectively. Plants were harvested at 21 days after planting, with aerial shoots and swollen hypocotyls (edible portion of the radish referred to as the “root” hereafter) separated immediately upon removal from the chambers. Samples were subsequently evaluated for their sensory characteristics (color, taste, overall appearance, and texture), taste-determining factors (glucosinolate and soluble carbohydrate content and myrosinase activity), proximate nutrients (protein, dietary fiber, and carbohydrate) and potential health benefit attributes (antioxidant capacity). In roots of control plants, concentrations of glucosinolate, total soluble sugar, and nitrate, as well as myrosinase activity and total antioxidant capacity (measured as ORAC_FL), were 2.9, 20, 5.1, 9.4, and 1.9 times greater than the amount in leaves, respectively. There was no significant difference in total antioxidant capacity, sensory characteristics, carbohydrate composition, or proximate nutrient content among the three pressure treatments. However, glucosinolate content in the root and nitrate concentration in the leaf declined as the atmospheric pressure decreased, suggesting perturbation to some nitrogen-related metabolism.     

扫描波束缝隙阵列天线方案设想

扫描波束缝隙阵列天线是一种相控阵天线,采用寄生振子实现波导缝隙天线的圆极化辐射,全金属结构可以承受恶劣的温度环境。每副天线可实现±45°一维扫描,两副天线组阵再辅以卫星自旋,可以实现全空间覆盖。此天线的优点是扫描范围宽、重量轻、结构紧凑和能在极端温度下工作。文章介绍了该天线的技术特点、方案设计和仿真分析结果。     

燃气流量可控的固体火箭冲压发动机燃气发生器动态特性

燃气流量可控的燃气发生器与燃气流量恒定的燃气发生器工作特性具有较大差异,燃气流量可控的燃气发生器是一个非最小相位系统。推导建立了燃气流量可控的燃气发生器的小扰动线性化动态模型,并基于此模型分析了燃气发生器负调特性的影响因素及燃气发生器系统的频率特性,得到了燃气发生器系统增益及时间常数随燃气发生器自由容积及燃气调节阀阀门面积的变化关系。研究表明,燃气发生器具有变参数特性。     

失调对叶片-轮盘耦合系统振动影响的预测

叶片 -轮盘系统的周期对称性经常由于制造、材料,以及非均匀磨损和其它因素而被破坏,引起系统出现失调现象,表现为结构特性的微小变化可能导致叶片振幅和响应的急剧增大。而失调也导致此类周期对称性结构振动特性计算的复杂化。利用有限元通用程序和模态综合技术,建立失调叶片 -轮盘耦合系统三维有限元模型,对一个有1 6个叶片的叶片 -轮盘耦合系统进行了振动特性计算分析,给出了叶片分散度和耦合度对振动特性的影响。     

悬臂柔性转子动力特性及高速动平衡试验

试验研究了装不同弹性支承和金属橡胶阻尼器(组合支承)的火箭发动机氧涡轮泵转子的动力特性,并对装优选出的组合支承的转子进行了高速动平衡及重复性考核试验。结果表明:悬臂柔性转子的动力特性可以通过支承的优化组合而得到改善,单面平衡技术大幅度减小了转子的动挠度和弹支的动应力,分解和重新装配所带来的装配不平衡不会实质性的影响转子原有的平衡状态。