机载热管冷板振动与加速度试验研究

为了考察机载振动与加速度环境对热管冷板传热性能的影响,以不同结构形式的普通铜水热管冷板与微热管阵列冷板为研究对象,搭建振动与加速度试验台进行试验。试验结果表明:Z向振动与加速度较X向与Y向对热管冷板传热性能的影响大,但振动的影响基本可以忽略,微热管阵列冷板受加速度的影响大于双U型普通热管冷板;加速度量级的增加对热管冷板传热性能的影响较小;双U型普通热管冷板在振动与加速度条件下的性能最优。     

Towards a cooperation between the arts,space science research and the European Space Agency – Preliminary findings of the ESA Topical Team Arts and Sciences (ETTAS)

The arts offer alternative insights into reality, which are explored by science in general, and broadened by the activities conducted by the European Space Agency [4] and other space agencies. Similar to the way the members of ESA are ambassadors for spaceflight and science, artists and cultural professionals are ambassadors for human expression, experimentation, and exploration. In June 2011, the ESA Topical Team Arts and Sciences (ETTAS) held a three-day workshop at the European Astronaut Centre in Cologne, Germany. During this workshop, topics and ideas were discussed to develop initiatives between the arts, sciences and ESA. The aim was to foster and expand the human and cultural aspects of space exploration, and at the same time offer a means of communication that aims to reach audiences beyond the scope of traditional space-related channels. The consensus of the team was that establishing and sustaining a transdisciplinary professional community consisting of ESA representatives, scientists and artists would fuel knowledge transfer, and mutual inspiration. Potential ways to provide a sustainable cooperation within and between the various groups were discussed. We present the preliminary findings including a number of measures and mechanisms to initiate and conduct such an initiative. Plausible organisational measures, procedures and consequences, as well as a proposition on how to proceed are also discussed. Overall, the involvement and cooperation between the arts, space science research and ESA will enhance in the citizens of the ESA member states the sense of public ownership of ESA results, and participation in ESA?s research.     

某涡轮导向叶片换热实验与计算

针对某涡轮导向叶片,实验测量了光滑叶片表面的压力系数和速比系数,并使用瞬态液晶测量技术获得了叶片全表面传热系数分布.分别使用shear stress transport（SST）,k-ω,k-ε和renormalization group（RNG）k-ε四种湍流模型模拟了相同结构尺寸的叶栅通道内的流动与换热,并与实验结果进行对比.结果表明:压力面压力系数沿弧长方向逐渐下降,吸力面上压力系数先快速下降达到最小值后缓慢上升（出现逆压梯度）.叶栅通道和叶片表面附近气流流动结构的复杂性导致叶片表面传热系数分布较为复杂.4种湍流模型对压力系数和速比系数的计算结果相互差别不大,计算数据也比较接近实验值.关于叶片表面传热系数,SST模型计算结果分布规律与实验接近,而其他3种湍流模型都没有能模拟出吸力面边界层分离对换热的影响.      

飞机-驾驶员闭环系统模糊预见控制器设计

针对驾驶员操纵延迟和飞机不确定性所导致的人-机系统跟踪性能降低的问题,提出一种基于T-S模糊模型的鲁棒预见辅助驾驶方法。建立驾驶员-飞机时滞不确定T-S模糊模型,引入预见控制思想补偿驾驶员延迟,以跟踪误差和驾驶员操纵负担为性能指标,将存在模型不确定性的人-机指令跟踪问题转化为模糊最优保性能控制问题,并推导了该凸优化所应满足的线性矩阵不等式。为克服预见步数增多引起增广系统维数较大、进而导致线性矩阵不等式不易求解的缺陷,设计了一种次优的预见控制器。最后,分别通过驾驶员模型仿真和飞行模拟器实验,验证了所设计的模糊预见控制器的有效性。     

基于核部分非负矩阵分解的亚像元级地物光谱分析

为了进一步提高亚像元级地物的光谱分析精度,提出了一种基于核部分非负矩阵分解(Kernel Protection Non-negative Matrix Factorization,KPNMF)的非线性解混算法.首先通过基于凸面几何理论的端元提取方法提取纯像元端元候选像素集合,然后根据候选像素的空间纯度指数判断纯像元端元.在纯像元端元信息已知的条件下,利用核方法对部分非负矩阵分解(Protection Non-negative Matrix Factorization,PNMF)进行推广,构造相应的目标函数,推导迭代求解过程,分解求得亚像元端元光谱和所有端元的丰度.试验结果表明,提出的解混算法具有良好的非线性分解能力,解混结果优于线性解混算法.     

火星车双向抽展式转移坡道展开原理及特性分析

我国首次火星探测任务将于2020年实施,一步实现"绕""着""巡"的目标。着陆器在火星表面软着陆后,火星车能否沿转移坡道安全转移至火星表面,关系着本次任务的成败。从火星车转移坡道功能要求出发,提出了一种双向抽展式转移坡道方案,解决了大展出比、驱动共用、可靠展开等关键问题,对其展开原理及力学特性进行分析,并开展了模拟火星重力环境的展开试验,为我国火星车转移坡道设计提供参考。     

空间充气薄膜衍射成像结构的热力耦合分析

随着空间光学技术的发展,衍射成像系统成为空间光学领域的研究热点。提出了一种充气薄膜衍射成像结构设计方案,针对其在空间热载荷作用下的热力耦合效应开展研究。建立了充气薄膜衍射成像结构的热力耦合顺序分析框架,基于I DEAS和ANSYS软件二次开发技术,实现了热力耦合数值分析,得到了结构在轨运行时的瞬态温度场、热应力、热变形等。分析结果表明,充气支撑结构产生了较大热变形,但最大热应力远小于聚酰亚胺薄膜材料的抗拉强度,而镜面中心处没有出现较大的热变形响应,为充气薄膜衍射成像结构的防热设计提供了技术支持。     

A robust semi-analytic method to solve the minimum ΔV two-impulse rendezvous problem

A novel semi-analytic approach is developed to determine the minimum $\mathrm{\Delta }V$ for a two-impulse rendezvous and validated both empirically and analytically. A previously published closed-form $\mathrm{\Delta }V$ estimate and the Lambert minimum energy transfer is used to establish upper and lower bounds of the minimum $\mathrm{\Delta }V$ transfer between two orbits. These bounds, in conjunction with the bisection method, operate on a nonlinear radical cost function to guarantee linear convergence. This approach has several real world applications including a low earth orbit (LEO) to highly elliptical orbit (HEO), and a HEO to retrograde geosynchronous orbit transfer. The minimum $\mathrm{\Delta }V$ estimates are better than those reported in the existing literature, while run times improved as much as two orders of magnitude over a fixed time Lambert solver. All singularity cases were addressed such that any orbital geometry, including Hohmann and radial elliptic transfers, converged to the global minimum $\mathrm{\Delta }V$. This approach will work for both coplanar and non-coplanar 3D geometries for any orbit type.     

燃气源控制气流非稳态耦合传热问题研究(Ⅰ)--计算模型和方法

针对某燃气源控制气流与导热套环之间的非稳态耦合传热问题,建立了数学模型,并采用整体求解的方法进行求解,即把流体区域的流动和对流换热与固体区域的导热过程组合起来,作为一个统一换热过程来处理。为确保计算结果在物理上的真实性,采用“假密度”法求解以温度T为求解变量的能量方程。对于非稳态控制方程离散后的离散方程采用了PISO方法进行求解。     

飞灰空心微珠/聚丙烯复合材料的弹性模量预测

基于三相球自洽模型和Mori-Tanaka方法,首先给出了计算含多相球形空心夹杂复合材料有效体积模量和有效剪切模量的一般公式,然后计算了飞灰空心微珠/聚丙烯复合材料的有效弹性模量随微珠含量及尺寸的变化规律.计算结果与实验结果吻合良好,表明:对于给定种类的空心微珠,微珠的含量及其大小是决定复合材料弹性模量的主要因素,微珠内压对复合材料弹性模量的影响可忽略不计.