集群无人机队形重构及虚拟仿真验证

队形重构是集群无人机（UAV）控制的重要问题，指无人机按照要求安全、无碰撞地从一个队形变换到另一个队形，其难点在于快速规划最优安全轨迹并控制无人机进行轨迹姿态的高精度跟踪。针对集群无人机队形重构的上述问题，首先，基于CAPT（Concurrent Assignment and Planning of Trajectories）算法，解决了多无人机的目标分配和轨迹生成的实时性问题，实现了集群无人机的最优安全路径规划；其次，提出一种有限时间多变量积分滑模连续控制算法，解决了无人机轨迹姿态的高精度跟踪问题，并通过MATLAB仿真验证了该控制算法的有效性；最后，为了更加真实直观地演示无人机三维仿真效果，建立了基于Gazebo-ROS的无人机仿真平台，实现了12架四旋翼无人机队形重构"建模-仿真-可视化"的一体化仿真演示，验证了上述路径规划算法和轨迹姿态控制算法的有效性。     

具有时间约束的无人机遗传算法航迹规划

为无人机进行航迹规划不仅要满足路径的有效性,还需要考虑无人机的到达时间约束.将遗传算法应用于动态环境中无人机的航迹规划,通过编码生成初始航迹,确定合理的适应度函数和进化操作,同时根据要求到达时间约束为每个航迹加入过点速度和到达时间信息,最终搜索规划出可飞且满足时间约束的航迹.在仿真实验中实现了针对移动目标的规划和突然出现威胁的局部重规划.     

Analysis of precipitable water vapour characteristics from GNSS measurements during the snow season in Liaoning Province,China

Global Navigation Satellite System (GNSS) remote sensing precipitable water vapour (PWV) data from November 2015 to March 2019 were combined with snowfall observation data and used to analyse PWV characteristics in Liaoning Province during the snow season (from November to March the following year) and their relationship with snowfall. The potential of using GNSS for PWV measurements was demonstrated using sounding data with a correlation coefficient higher than 0.9 and a mean bias error lower than 0.5 mm. According to the GNSS PWV data gathered at 30-min intervals from 68 GNSS stations in Liaoning during the snow season, the monthly PWV average was highest in November and lowest in January. Negative correlations were found between PWV and altitude. Most of the water vapour was concentrated in the low layer of the atmosphere, and the contribution of this vapour to the PWV was higher during the snow season than in summer. A total of 43 snow cases were identified using the snowfall records from 53 GNSS stations, and the characteristics of PWV during these snowfalls were analysed. An increase in PWV was observed before snowfall events. Moreover, the influence of synoptic systems and air mass origins on PWV was analysed based on National Centers for Environmental Prediction (NCEP) reanalysis data and the Hybrid Single Particle Lagrangian Integrated Trajectory (HYSPLIT) model. The results show that the water vapour condition was better when the synoptic systems or air masses came from areas south of Liaoning.     

弹道跟踪数据融合处理的快速算法

针对弹道跟踪数据融合处理中的大计算量环节研究了快速算法。用样条函数表示弹道参数,建立了多测元的联合观测模型和弹道参数的非线性融合计算模型,给出了弹道参数的求解算法,分析了弹道参数融合计算中的大型矩阵运算问题,利用基础线性代数函数库提高了大型矩阵的运算速度。建立了样条模型计算的非线性约束优化模型,给出了确定样条节点位置的优化算法,通过分析样条模型的计算原理设计了并行算法,实现了样条模型的并行化计算。仿真结果表明,弹道参数融合计算和样条模型计算的效率都得到了显著提高,计算时间减少了65.47%,对缩短数据处理周期有重要意义。     

基于LADRC的无人直升机轨迹跟踪

无人直升机轨迹控制系统是对多输入/多输出强耦合非线性系统进行解耦控制的系统。为解决无人直升机轨迹控制效果依赖于直升机物理参数的测量和辨识精度以及外部扰动大小问题,提出了一种基于线性自抗扰控制(LADRC)的多回路无人直升机轨迹控制系统。首先建立无人直升机X-Cell的飞行动力学模型,并引入风切变、大气紊流和突风模型以更加准确模拟真实飞行环境;然后对X-Cell进行配平计算以验证动力学模型和配平算法的准确性,并选取一组配平值作为轨迹控制仿真的初始状态和操纵量;随后根据被控量的动力学方程阶次选取对应的一阶和二阶LADRC基本控制器,并结合时间尺度原理,自内向外依次构建无人直升机的姿态、速度和位置控制回路,将三回路串联从而建立了无人直升机轨迹控制系统;而后进行了稳定性分析,特征根计算结果表明轨迹控制系统镇定了X-Cell开环系统不稳定的动态特性;最后将该控制系统应用于各种扰动下直升机轨迹跟踪仿真,结果表明本文无人直升机轨迹控制系统能很好地实现带爬升率的"8"字形轨迹跟踪,且相比于基于比例积分和微分(PID)控制的轨迹控制系统,该控制系统具有更优的鲁棒性和抗扰性。     

Tangent-impulse transfer from elliptic orbit to an excess velocity vector

The two-body orbital transfer problem from an elliptic parking orbit to an excess veloc-ity vector with the tangent impulse is studied. The direction of the impulse is constrained to be aligned with the velocity vector, then speed changes are enough to nullify the relative velocity. First, if one tangent impulse is used, the transfer orbit is obtained by solving a single-variable function about the true anomaly of the initial orbit. For the initial circular orbit, the closed-form solution is derived. For the initial elliptic orbit, the discontinuous point is solved, then the initial true anomaly is obtained by a numerical iterative approach; moreover, an alternative method is proposed to avoid the singularity. There is only one solution for one-tangent-impulse escape trajectory. Then, based on the one-tangent-impulse solution, the minimum-energy multi-tangent-impulse escape trajectory is obtained by a numerical optimization algorithm, e.g., the genetic method. Finally, several examples are provided to validate the proposed method. The numerical results show that the minimum-energy multi-tangent-impulse escape trajectory is the same as the one-tangent-impulse trajectory.     

Optimal guidance of extended trajectory shaping

To control missile＇s miss distance as well as terminal impact angle, by involving the timeto-go-nth power in the cost function, an extended optimal guidance law against a constant maneuvering target or a stationary target is proposed using the linear quadratic optimal control theory.An extended trajectory shaping guidance（ETSG） law is then proposed under the assumption that the missile-target relative velocity is constant and the line of sight angle is small. For a lag-free ETSG system, closed-form solutions for the missile＇s acceleration command are derived by the method of Schwartz inequality and linear simulations are performed to verify the closed-form results. Normalized adjoint systems for miss distance and terminal impact angle error are presented independently for stationary targets and constant maneuvering targets, respectively. Detailed discussions about the terminal misses and impact angle errors induced by terminal impact angle constraint, initial heading error, seeker zero position errors and target maneuvering, are performed.     

基于样条拟合和双向滤波的助推段弹道估计

三次B样条拟合在助推段弹道估计中应用广泛,但存在弹道两端点邻域估计误差过大的问题.通过对B样条基函数矩阵的特性进行分析,发现其原因为端点邻域估计时能利用的有效观测数据最少.因此,提出一种基于样条拟合和双向滤波相结合的弹道估计策略：首先将双星观测数据利用无迹变换转换为等效位置观测;然后利用三次B样条拟合弹道;最后基于一种自适应卡尔曼滤波器,采用双向滤波策略改善样条拟合的端点估计精度.仿真结果表明：组合方法使样条拟合的端点估计误差减少40％,同时使估计弹道更平滑.此结果满足实时性要求.     

嫦娥三号动力落月段轨迹确定策略

针对CE-3（嫦娥三号）月球探测器动力下降弧段,特别是悬停避障段频繁机动的特点,提出了采用B样条函数逼近方法进行落月轨迹确定.仿真分析表明：在动力下降运动较平滑弧段,B样条逼近法计算结果略优于多项式拟合法;而在频繁机动弧段,B样条逼近法有明显优势.计算结果表明,加入VLBI（Very Long Baseline Interferometry,甚长基线干涉测量）数据后能有效提高落月轨迹确定精度,在没有系统误差的情况下联合定位后位置精度优于50 m.此外,还分析了三向测量系统差对定位的影响,可对CE 3任务提供参考.最后对CE 3实测数据进行处理,动力落月段末点位置和着陆器定位计算值相差不到200 m.     

一种适用于小推力轨控发动机“二次变轨”机动突防方案

针对突防发动机轨控推力较小,难以产生在拦截器末制导段内成功突防所需的机动过载的实际情况,提出避开拦截器机动性能最强的末制导段,而选择在拦截器自由飞行段和末制导结束后实施“二次机动变轨”的突防方案,旨在解决弹道中段机动突防方案的有效性问题.建立了推力方向、推力持续时间等轨控发动机主要控制参数的优化规划模型,提供了基于遗传...