The geomagnetic solar flare effect identified by SIIG as an indicator of a solar flare observed by GOES satellites

This paper studies the efficiency of geomagnetic solar flare effects (gsfe) in X solar flare detection; so during the period 1999–2007 a comparison between solar flare (sf) observed by satellites of the Geostationary Operational Environmental Satellite (GOES) programme and gsfe published by the Service International des Indices Geomagnetiques (SIIG) is made.     

Statistical characterisation of spread F over South Africa

The occurrence of mid-latitude spread F (SF) over South Africa has not been extensively studied since the installation of the DPS-4 digisondes in 1996 and 2000 at Grahamstown (33.32 °S, 26.50 °E) and Madimbo (22.38 °S, 30.88 °E) respectively. This study is intended to quantify the probability of occurrence of F region disturbances associated with SF over South Africa. A study was conducted using data for 8 years (2001–2008) over Madimbo (with a time resolution of 30 min) and Grahamstown (with a variable time resolution of 15 and 30 min). In this study, SF has been classified into frequency SF (FSF), range SF (RSF) and mixed SF (MSF). The SF events were identified by manually identifying ionograms showing SF and tabulating them according to type for further statistical analysis. The results show that the diurnal pattern of SF peaks strongly between 01:00 and 02:00 local time, LT (LT = UT + 2 h), where UT is the universal time. This pattern is true for all seasons and types of SF at Madimbo and Grahamstown in 2001 and 2005, except for RSF which had peaks during autumn and spring in 2001 at Madimbo. The probability of both MSF and FSF tends to increase with decreasing solar activity, with a peak in 2005 (a moderate solar activity period). The seasonal peaks of MSF and FSF are more frequent during winter months at both Madimbo and Grahamstown. In this study, SF was evident in ∼0.03% and ∼0.06% of the available ionograms at Madimbo and Grahamstown respectively during the 8 years.     

航空燃气涡轮冷气掺混流动损失的数值研究

采用理论分析的研究方法,对不同冷气掺混形式造成的涡轮气动性能的变化进行了数值计算研究。针对气膜冷却所造成的流动损失,采用修正的Ito等压混合模型;而针对尾缘冷气喷射所造成的流动损失,则采用了修正的Schoberi流动损失模型。对于不同的冷却方式,假定它们之间对主流造成的流动损失是相互独立。以某高压涡轮导向器作为研究对象,分析了各种冷气参数和几何参数对冷气掺混过程的影响规律。研究结果表明,涡轮叶片气冷过程引起的叶栅总压损失随冷气入射角度、吹气比、混合层厚度的变化而显著变化,通过优化设计可以使气冷过程造成的流动损失最小。     

Solar Irradiance Variability Since 1978

Since November 1978 a set of total solar irradiance (TSI) measurements from space is available, yielding a time series of more than 25 years. Presently, there are three TSI composites available, called PMOD, ACRIM and IRMB, which are all constructed from the same original data, but use different procedures to correct for sensitivity changes. The PMOD composite is the only one which also corrects the early HF data for degradation. The results from the detailed analysis of the VIRGO radiometry allow a good understanding of the effects influencing the long-term behaviour of classical radiometers in space. Thus, a re-analysis of the behaviour of HF/NIMBUS-7 and ACRIM-I/SMM was indicated. For the former the situation is complicated by the fact that there are no in-flight means to determine changes due to exposure to solar radiation by comparison with a less exposed radiometer on the same spacecraft. The geometry and optical property of the cavity of HF is, however, very similar to the PMO6-type radiometers, so the behaviour of the PMO6V radiometers on VIRGO can be used as a model. ACRIM-I had to be revised mainly due to a henceforth undetected early increase and a more detailed analysis of its degradation. The results are not only important for solar radiometry from space, but they also provide a more reliable TSI during cycle 21. The differences between the revised PMOD composite and the ACRIM and IRMB are discussed by comparison with a TSI reconstruction from Kitt-Peak magnetograms. As the PMOD composite is the only one which has reliable data for cycle 21, the behaviour of the three solar cycles can now be compared and the similarities and differences discussed.     

全站仪检测数据管理系统

介绍了全站仪检测数据管理系统。本系统以FoxPro for Windows为基础,采用模块结构,具有对检测数据录入修改,自动转换,成果计算,查询显示等功能,实现了系统数据管理和处理的一体化。     

回流燃烧室流动特性试验

为了揭示有/无燃烧状态下燃烧室热态和冷态流场的特征和流动特性,针对某型回流燃烧室单头部试验件,使用粒子图像测速仪（PIV）,测量燃烧室燃烧状态下不同截面处的热态流场,以及没有燃烧状态下不同截面处的冷态流场,探讨不同总压损失系数对回流燃烧室热态/冷态流场特征及流动特性的影响。研究表明:随着总压损失系数的增大,冷态条件下各截面流场结构基本保持不变,如射流孔穿透深度、射流角度、回流区位置及大小、流线等基本保持一致,但是各位置点速度大小逐渐增大。热态条件下各截面流场随着总压损失系数增大,流场结构也基本保持不变;相同总压损失系数时,热态流场与冷态流场存在差异,燃油喷射与气流的相对运动将会对燃烧室头部的流场结构造成影响,速度较冷态流动时略微增大。      

基于自动控制的蒸汽式热压机加热控制系统研究

介绍一种用于多层加热加压聚合生产绝缘材料的热压机加热系统,它具有自动化程度高、高效、节能的特点,将现有的蒸汽式加热系统的温度均匀性控制提高到一个新的台阶。     

大涵道比风扇/增压级进气畸变数值模拟研究

为探究进口总压畸变下大涵道比风扇/增压级内部流场的主要特征,基于三维彻体力模型的思想,开发了一套能够实现风扇/增压级内外涵联算功能的三维数值计算程序。利用该程序模拟了某大涵道比风扇/增压级在周向总压畸变进气下的三维流场。计算结果表明：大涵道比风扇单转子不同叶高处的畸变传递特征差异较大,转子出口总压畸变强度由叶根到叶尖逐渐降低,在叶尖处衰减为最小值1.5%;在转子出口相应诱导出的总温畸变强度由叶根到叶尖逐渐升高,在叶尖处达到最大值1.4%;进口周向总压畸变导致风扇转子总压比下降0.5%,而风扇转子出口形成的总压总温复合畸变导致增压级总压比下降2%;总压畸变在增压级中呈逐级衰减趋势,而高温畸变区的周向范围在逐级增加。     

前可变面积涵道引射器特性的试验与数值模拟

为了研究主、次流的进口总压比及出口背压对前可变面积涵道引射器(FVABI)工作特性的影响与流动掺混机理,采用试验与三维数值模拟方法对不同进口总压比下引射器工作性能及掺混流场随背压变化规律进行了分析。结果表明:标准k -ε模型用于引射器掺混流场的模拟具有较好的准确性;进口总压比越大,引射器总压损失越大;进口总压比不变,随背压增加,引射器总压损失先减小后增加;进口总压比不变,引射器在背压变化过程中存在总压损失最小点;背压减小时,引射器存在临界工况点,且进口总压比越大达到临界工况点的背压越大,可变涵道比的范围变窄;主、次流掺混过程主要集中在沿气流方向上x/l=03~06位置之间,在黏性力作用下动量、质量充分交换,沿流向截面速度径向分布趋于均匀。     

航空齿轮磨削加工安装偏心误差补偿研究

磨齿加工时齿坯几何中心与回转工作台轴心存在安装偏心误差,降低了磨齿加工精度。以数控成型砂轮磨齿机工作原理为基础,建立偏心误差磨削加工几何模型;提出安装偏心误差补偿法,建立偏心误差补偿数学模型,通过数学模型求出磨削砂轮在X、Y两个方向的进给补偿增量;以YK73125数控成型砂轮磨齿机为例,进行安装偏心误差补偿实验,齿轮的左右齿面单个齿距极限偏差绝对值分别减小了0.9μm和1.6μm,齿距累积总偏差绝对值分别减小了49.6μm和43.3μm。结果表明:安装偏心误差与单个齿距偏差和齿距累积总偏差成正比;采用安装偏心误差补偿进行磨齿加工,有效地减小了单个齿距偏差和齿距累积总偏差,齿轮的精度有所提高。