高速冲液脉冲放电制备纳米硅球

通过Ansys对单脉冲放电过程进行温度分布仿真时发现,当脉宽很小时,汽化体积所占比例很高,即材料利用率较高,但是产率较低;而加大脉宽时,产率较高,但是汽化比例较低。为综合两者的优势,利用大脉宽加工,使放电通道移动。仿真结果表明,相对于放电通道静止,其在材料利用率和产率上都有了大幅度提高。当在加工中引入高速冲液时,实验表明其能促使放电通道发生漂移,收集产物后称量、计算,其产率达到了1g/h。     

基于比例阀控制的液压附件部件综合试验台的设计

针对某飞机液压系统对液压附件、部件的测试要求,设计了多支路液压系统综合试验台,实现了对飞机液压系统中作动器的动作时间、次数和速度等参数测试,对液压缸、阀、集成块等附件在不同压力、流量和温度等条件下的性能测试。该设计主要采用比例阀控制压力和流量,多级过滤器进行油源净化,PLC和继电器实现测控、电位计进行压力和流量调节,数显表直接显示压力、流量和温度、时间等参数。通过实际测试验证,试验台工作稳定、安全可靠、调整方便、显示直观、振动噪音小、不泄露,满足了某型号飞机液压附件部件测试的要求。     

舰尾流环境中载机纵向QFT/TECS控制系统设计

为了消除舰尾流对载机着舰过程产生的影响,同时完成低动压状态下飞行速度与高度的解耦工作,基于定量反馈理论/总能量控制理论(QFT/TECS)设计了纵向着舰控制系统。针对着舰过程中数学模型所具有的不确定因素及舰尾流对下滑航迹的影响,以载机高度变化率为控制对象,使用定量反馈理论结合推力补偿系统进行了内回路鲁棒控制律设计。外回路控制律设计是以总能量控制理论为基础,通过粒子群优化算法对待调控制参数进行寻优,进而实现了对高度、速度等参数的精确控制,完成了载机纵向着舰轨迹与速度的解耦工作。仿真结果表明,该控制律在拥有较强的鲁棒性的基础上具有良好的解耦控制能力,实现了载机着舰段的高度与速度的解耦控制,明显提高了载机对着舰轨迹的跟踪能力,可满足不确定条件下载机的着舰要求。     

Influence of curved thin-film device on deformation of a solar sail

A spinning solar sail IKAROS’s membrane is estimated to unexpectedly deform into an inverted pyramid shape due to thin-film devices with curvature, such as thin-film solar cells and steering devices on the membrane. It is important to investigate the deformation caused by the curved thin-film devices and predict the sail shape because the out-of-plane deformation greatly affects solar radiation pressure (SRP) and SRP torque. The purpose of this paper is to clarify the relationship between the global shape and orientation and position of curved thin-film devices and to evaluate SRP torque on the global shape using finite element analysis. The global shape is evaluated based on the out-of-plane displacement and the SRP torque. When the curved thin-film devices make the membrane shrink in the circumferential, diagonal, and radial direction, the sail deforms into a pyramid shape, an inverted pyramid one, and a saddle one, respectively. The saddle shape is more desirable for solar sails than the inverted pyramid shape and the pyramid one from the viewpoint of shape stability to SRP and control of SRP torque in the normal direction of the sail (windmill torque). The position of the thin-film device tends to increase the absolute value of windmill torque when it is biased circumferentially from the petal central axis. The suggested design principles for the arrangement of thin-film devices is that the curved thin-film devices should be directed so that the sail shrinks in the radial direction in order to deform the sail into a saddle shape with high shape stability, and the position of the thin-film devices should be biased in the circumferential direction paying attention to the absolute value of windmill torque to determine the direction of windmill torque.     

Deorbiting spacecraft with passively stabilised attitude using a simplified quasi-rhombic-pyramid sail

This paper studies deorbiting using an analogue to the quasi-rhombic-pyramid concept for planar motion. The focus is on maintaining a stable (meaning oscillatory) attitude close to the direction of the velocity of the spacecraft relative to the atmosphere. The study consists of a massive computation of deorbit times chosen in a region of the phase space where atmospheric drag plays a leading role. Here, no damping effects are considered. Thus, any passive stabilisation observed is either due to solar radiation pressure or atmospheric drag. The results show that such stable deorbiting is feasible up to a threshold that depends upon the physical parameters of the sail. This threshold is around 500 km of altitude. Stable deorbiting is also shown to reduce the unpredictability that appears due to tumbling.     

Temporal variation of the arterial pressure in healthy young people and its relation to geomagnetic activity in Mexico

We present a study of the temporal behavior of the systolic (SBP) and diastolic (DBP) blood pressure for a sample of 51 normotensive, healthy volunteers, 18 men and 33 women with an average age of 19 years old in Mexico City, Mexico, during April and May, 2008. We divided the data by sex along the circadian rhythm. Three geomagnetic storms occurred during the studied time-span. The strongest one, a moderate storm, is attributed to a coronal hole border that reached the Earth. The ANOVA test applied to the strongest storm showed that even though we are dealing with a moderate geomagnetic storm, there are statistically significant responses of the blood pressure. The superposed epoch analysis during a three-day window around the strongest storm shows that on average the largest changes occurred for the SBP. Moreover, the SBP largest increases occurred two days before and one day after this storm, and women are the most sensitive group as they present larger SBP and DBP average changes than men. Finally, given the small size of the sample, we cannot generalize our results.     

Reentry survival analysis of tumbling metallic hollow cylinder

The survival of orbital debris reentering the Earth’s atmosphere is considered. The numerical approach of NASA’s Object Reentry Survival Analysis Tool (ORSAT) is reviewed, and a new equation accounting for reradiation heat loss of hollow cylindrical objects is presented. Based on these, a code called Survivability Analysis Program for Atmospheric Reentry (SAPAR) has been developed, and the new equation for reradiation heat loss is validated. Using this equation in conjunction with the formulation used in ORSAT, a comparative case study on the Delta-II second stage cylindrical tank is given, demonstrating that the analysis using the proposed equation is in good agreement with the actual recovered object when a practical value for thermal emissivity is used. A detailed explanation of the revised formulation is given, and additional simulation results are presented. Finally, discussions are made to address the applicability of the proposed equation to be incorporated in future survival analyses of orbital debris.     

环刷刷丝接触压力检测系统设计

环刷是导电滑环的重要组成部件,其接触压力是滑环使刷丝变形后产生的刷丝对滑环的作用力。环刷刷丝接触压力值微小,影响因素较多,但环刷刷丝接触压力的大小将直接关系着导电滑环的技术性能和使用寿命。本文针对环刷的特点详细研究了环刷刷丝接触压力的测量方法和技术,并设计了一套环刷刷丝接触压力检测系统,实现了对环刷刷丝接触压力的自动精密测量。     

测点布局对航空发动机总压畸变指数的影响

为了阐明测点布局对航空发动机进气总压畸变测试结果的影响，利用旋转总压测量耙对5种畸变流场的稳态和动态总 压畸变成分进行了测试，计算了旋转总压测量耙位于不同位置时畸变流场的稳态周向总压畸变指数和动态总压畸变指数，分析了 不同测点布局下总压畸变指数计算结果的偏差。结果表明：测量耙/测点与畸变流场的相对周向位置对总压畸变指数计算结果的 准确性至关重要，对于所分析的5种畸变流场，增加测量耙/测点周向数目并不能使总压畸变指数计算结果的偏差单调减小，但可 降低其对测量耙/测点周向位置的敏感度。基于畸变区域周向分布设计稳态总压畸变测量耙的周向位置，组合使用不同相对半径 处测点对动态总压畸变进行监测，可提高总压畸变指数计算结果的准确性。     

基于功率裕度的某型发动机全寿命性能研究

随着使用时间不断增加,研究飞行队所有选装ARRIEL2S系列发动机全寿命性能变化趋势的必要性突显.针对SRRIEL2S系列发动机全寿命性能参数变化特点,提出使用基于可几误差舍弃理论处理发动机功率校验数据,分区间描绘该系发动机全寿命性能指标变化趋势,给出该系发动机全寿命性能特点,为机务工程人员监控该系发动机提供有利依据；提出延长功率校验间隔的假设,并在理论上做了充分论证,为节约该系发动机运行成本提供一个明确及可行的方向.