物流作业成本的计算系统及其开发

为了有效控制商业企业的物流成本,采用作业成本计算法分析物流作业及成本动因,计算物流成本。设计物流成本计算的逻辑流程,分析物流作业成本计算系统中的资源、作业与成本动因等相关概念,开发物流作业成本计算的程序,并以X公司为例,说明物流作业成本法的可操作性。作业成本计算法有助于企业准确计算并控制物流成本。     

基于多模PPP-AR技术的大气水汽探测性能分析

精密单点定位（precise point positioning，PPP）反演大气可降水量（precipitable water vapor，PWV）具有精度高、实时性强等优点，能够在灾害监测、降雨预报及探测降水信息等方面发挥重要作用。为评估整周模糊度固定模式下PPP-AR（PPP ambiguity resolution）反演PWV的性能，选取全球范围16个MGEX站2022年4个时段的观测数据，采用最终精密星历解算，设置不同星座组合（GPS,BDS-3,GPS+BDS-3,GPS+GLO+GAL+BDS-3）获取对流层延迟（zenith total delay，ZTD）估值，并转换为PWV。从PPP-ZTD与IGS-ZTD的相关性、PPP-ZTD收敛时间、ZTD估值精度和PPP-PWV估值精度4个方面评价多模PPP-AR探测水汽的性能。结果表明，与单（G、C）、双系统（GC）固定解相比，多系统（GREC）固定解获取ZTD估值更加精确，相关系数更高。相较于单、双系统，多系统具有更快的收敛速度，收敛时间分别缩短了27%,25%和20%，多系统固定解与浮点解相比收敛时间缩短11%。此外，对GNSS PPP反演的PWV与探空站PWV（RS-PWV）进行对比，结果表明，WUH2站与HOB2站单、双、多系统固定解、多系统浮点解（float-GREC）的平均均方根误差分别为6.40 mm,6.48 mm,6.19 mm,6.17 mm,6.19 mm和5.82 mm,5.77 mm,5.72 mm,5.62 mm,5.70 mm。多模下得到的PWV估值精度最高，可为高精度的水汽反演提供支持。     

选择工程材料的一种定量化方法

本文简述了选择工程材料时应考虑的部分因素,论述了材料在某些载荷作用下其机械性能与成本之间的关系,从而给出了可以定量化比较和计算的选择工程材料的方法。     

Modularity and Spacecraft Cost

From computers to aeronautics, many industries have achieved great cost savings through the use of modular engineering approaches. In standardizing interfaces between elements and by reusing functional units, projects can achieve direct reductions in required development labor and secondary savings from enhanced reliability via improved process control from manufacturing identical units. Issues involved in the extension of modular design to the space industry are discussed. A cost model is developed to resolve some of the conflicting advantages and disadvantages between modular and customized designs. Key regimes are identified that represent the best opportunities for applying modular concepts.     

飞机备件供应费用动力学仿真研究

以飞机维修保障中备件供应费用为研究对象,首先分析了费用产生的因果关系,然后绘制存量流量图,建立存量、流量、辅助变量、常量之间的关联方程：在确定模型合理的基础上,对备件供应费用随时间的变化情况进行仿真分析。     

Accurate single-observer passive coherent location estimation based on TDOA and DOA

This paper investigates the problem of target position estimation with a single-observer passive coherent location(PCL) system. An approach that combines angle with time difference of arrival(ATDOA) is used to estimate the location of a target. Compared with the TDOA-only method which needs two steps, the proposed method estimates the target position more directly. The constrained total least squares(CTLS) technique is applied in this approach. It achieves the Cramer–Rao lower bound(CRLB) when the parameter measurements are subject to small Gaussian-distributed errors. Performance analysis and the CRLB of this approach are also studied. Theory verifies that the ATDOA method gets a lower CRLB than the TDOA-only method with the same TDOA measuring error. It can also be seen that the position of the target affects estimating precision.At the same time, the locations of transmitters affect the precision and its gradient direction.Compared with the TDOA, the ATDOA method can obtain more precise target position estimation.Furthermore, the proposed method accomplishes target position estimation with a single transmitter,while the TDOA-only method needs at least four transmitters to get the target position. Furthermore,the transmitters' position errors also affect precision of estimation regularly.     

基于BP神经网络的软件项目成本估测方法

为进一步提高软件项目成本估测的准确度,减少在使用传统估测方法时产生的较大误差,提出了一种基于BP神经网络算法的软件项目成本估测模型。利用BP神经网络对软件项目成本进行估计,采用梯度下降自适应Ir的BP算法训练,仿真结果表明,基于算法的软件项目成本估测值与实际成本的偏差较小。     

航空发动机研制费估算工作的现状与展望

针对在立项论证阶段对航空发动机项目经费进行快速并有效的估算的问题,基于中国航空发动机的研制现状和型号数据的积累情况,分析了发动机研制经费估算工作的重点与难点以及相应的解决途径,并采用偏最小二乘法建立了航空发动机研制经费估算模型。计算结果表明:该发动机模型精度较高,已经应用于国产某型涡扇发动机的经费测算工作中,并可用于中国未来航空发动机型号的研制经费估算。     

Novel passive localization algorithm based on double side matrix-restricted total least squares

In order to solve the bearings-only passive localization problem in the presence of erroneous observer position, a novel algorithm based on double side matrix-restricted total least squares (DSMRTLS) is proposed. First, the aforementioned passive localization problem is transferred to the DSMRTLS problem by deriving a multiplicative structure for both the observation matrix and the observation vector. Second, the corresponding optimization problem of the DSMRTLS problem without constraint is derived, which can be approximated as the generalized Rayleigh quotient minimization problem. Then, the localization solution which is globally optimal and asymptotically unbiased can be got by generalized eigenvalue decomposition. Simulation results verify the rationality of the approximation and the good performance of the proposed algorithm compared with several typical algorithms.     

三层三级民机修理级别经济性分析模型的改进

现代民机产品普遍采用模块化设计，具有多层次特点，相应的维修场所也表现为多个维修级别。现有修理级别分析（LORA）模型在移级维修和报废时，可能存在父单元与其内部封装子单元成本重复累加的问题。引入跟随行为矩阵，对子单元中因父单元层级约束而做出的决策进行标记，能有效地避免父单元与子单元成本被重复计算。在此基础上，考虑实际维修活动中无故障发现事件（NFF）、二次维修等人为因素对LORA决策的影响，建立适用于民机的修理级别分析模型，较已有模型更加真实地反映决策的预计成本，提高了决策的可信度和工程适用性。最后使用混合惩罚函数法将原问题转化为等价的无约束优化问题，采用改进的二进制粒子群算法（BPSO）对多故障模式下的三层三级案例进行仿真优化，验证了该经济性分析模型的合理性和求解算法的有效性。