结构形式及成型方案对飞机复材结构的外形精度影响分析

与金属相比复合材料板件的厚度偏差较大,这一弱点对保证飞机装配精度非常不利。本文针对三种典型结构形式,计算了各结构形式采用不同成型方案的外形偏差值,通过对比分析,从保证飞机外形面精度的角度提出了应选择的成型方案。     

SAE线性令牌传输总线与光纤型分布式数据接口规约的比较

SAE LTPB与ANSI FDDI两种光纤高速总线规约很适合在分布式航空电子综合系统中使用,以满足下一代高性能军用飞机系统区域内、外数据的高传递速率的需要。本文从几个方面对其作了比较,旨在为设计者选择使用提供参考。     

锯齿冠的结构特性与设计

根据锯齿冠结构原理,导出了包含锯齿冠结构特性参数（λ、ψ、βμ、Δβ）的关系式,即锯齿冠结构特性方程,并将其图解成锯齿冠结构特性曲线,直观、清晰地描述了各特性参数之间的关系和变化规律;揭示了由实际条件产生的“紧度偏差”,论述了锯齿冠结构的设计方法。同时指出,选择过大的接触角会使叶冠失效而引发叶片故障。     

航空发动机分布式控制通讯网络拓扑结构优化

针对航空发动机分布式控制系统通讯网络拓扑结构的构架问题,建立航空涡扇发动机机匣模型,选取具有代表性的10个传感器作为控制节点开展研究。同时考虑发动机表面存在通讯总线不可通过区域,以及控制节点的工作可靠性因其重要程度存在差异的约束条件,利用遗传算法对航空发动机分布式控制系统通讯网络的拓扑结构进行优化设计。结果表明:优化过程简单,并且优化得到的通讯网络拓扑结构在满足约束条件的基础上线束总长度最短。     

流线曲率法在多级跨声速轴流压气机特性预测中的应用

为研究多级跨声速压气机的分析问题,以通流理论为基础,采用了一系列适用于跨声速压气机的攻角、落后角和损失等经验模型,发展了一套基于流线曲率法的通流计算程序来预测跨声速压气机流场及其工作特性。为提高经验模型的预测精度,考虑到真实压气机中复杂的三维流动效应,针对部分早期模型进行了合理改进,包括改进了落后角模型使其适用于更大弯度范围叶型,以及采用一种更为合理的可变结构激波损失预测模型。针对两台跨声速压气机算例进行了计算校验,并将校验结果与实验值和三维数值计算进行对比。对比表明,设计工况下总压比最大计算误差为4.1%,效率误差为1.1%,在非设计工况特性预测和展向流场参数计算中也能得到和实验值相符的变化趋势,该通流计算方法可为现代跨声速轴流多级压气机特性分析提供具有参考价值的预测结果。     

Dependence on forming parameters of an integral panel during the electromagnetic incremental forming process

Nowadays, more and more attentions are paid to electromagnetic incremental forming(EMIF), especially for a part with a large-scale size, e.g., an integral panel with stiffened ribs. In this work, the bending of a panel into a double-curvature profile via EMIF is carried out experimentally and evaluated by comparing the formed profile with the desired profile. During the process,discharges at four positions along different discharge paths are designed. The effects of forming parameters on the die-fittingness of the workpiece are discussed, for which two evaluation indices are used to judge forming results. The results show that a discharge voltage in an incremental mode is helpful to improve the fittingness and avoid the collision rebound against the die at the same time.Discharging at the diagonal positions with the ‘‘X" discharge path exhibits the minimal shape deviation and the best forming uniformity. On the contrary, discharging at the parallel positions with the ‘‘Z" discharge path obtains the worst forming quality. Overlap of the coil at different positions should be given during EMIF; however, a lower overlap rate of the coil helps improve the forming quality. The results obtained in this work are useful for forming integral panels with stiffened ribs via the EMIF process.     

航空齿轮磨削加工安装偏心误差补偿研究

磨齿加工时齿坯几何中心与回转工作台轴心存在安装偏心误差,降低了磨齿加工精度。以数控成型砂轮磨齿机工作原理为基础,建立偏心误差磨削加工几何模型;提出安装偏心误差补偿法,建立偏心误差补偿数学模型,通过数学模型求出磨削砂轮在X、Y两个方向的进给补偿增量;以YK73125数控成型砂轮磨齿机为例,进行安装偏心误差补偿实验,齿轮的左右齿面单个齿距极限偏差绝对值分别减小了0.9μm和1.6μm,齿距累积总偏差绝对值分别减小了49.6μm和43.3μm。结果表明:安装偏心误差与单个齿距偏差和齿距累积总偏差成正比;采用安装偏心误差补偿进行磨齿加工,有效地减小了单个齿距偏差和齿距累积总偏差,齿轮的精度有所提高。     

面向集中力扩散的回转曲面加筋拓扑优化方法

为了提高航天器回转曲面加筋型连接结构的集中力扩散效率,需要开展回转曲面加筋集中力扩散结构设计。传统放射肋设计方法普遍依赖设计经验、难以满足集中力高效扩散需求。因此,提出一种面向集中力扩散的回转曲面加筋拓扑优化方法。第1步,建立了一种基于各向异性过滤技术的集中力扩散拓扑优化方法,保证拓扑优化结果满足回转曲面加筋制造工艺要求;第2步,提出了一种基于网格变形技术的拓扑优化结果智能重构方法,可高效准确地对回转曲面加筋拓扑优化结果进行模型自动重构。基于所提出方法,以卫星平台对接环这种典型的回转曲面加筋壳为对象开展算例研究,并将优化结果与传统放射肋设计结果进行对比。结果表明,所提出的优化方法可得到加筋构型清晰、满足回转曲面加筋制造工艺要求的优化结果,且具有集中力扩散效率高、网格质量依赖性低、拓扑特征重构高效等优点。     

SCI网络拓扑结构的可生存性

从航空电子系统的需求出发,研究了适于航电系统的SCI(Scalable Coherent Interface)网络拓扑结构的可生存性.选择了由双节点或skip-a-node结构形式构成的网格形、蝶形等适于SCI网络的拓扑形式并构造了二种网络拓扑结构以便于不同结构的可生存性比较.同时考虑边及节点损坏的情况,利用图的邻接矩阵对网络连通关系进行了计算和分析,找到并印证了具有高可生存性的拓扑形式,同时发现相同结构下小环方向的改变对可生存性也有影响.      

Optimization of communication network topology for navigation sharing among distributed satellites

Navigation sharing among distributed satellites is quite important for coordinated motion and collision avoidance. This paper proposes optimization methods of the communication network topology to achieve navigation sharing. The whole communication network constructing by inter-satellite links are considered as a topology graph. The aim of this paper is to find the communication network topology with minimum communication connections’ number (MCCN) in different conditions. It has found that the communication capacity and the number of channels are two key parameters affecting the results. The model of MCCN topology for navigation sharing is established and corresponding method is designed. Two main scenarios, viz., homogeneous case and heterogeneous case, are considered. For the homogeneous case where each member has the same communication capacity, it designs a construction method (Algorithm 1) to find the MCCN topology. For the heterogeneous case, it introduces a modified genetic algorithm (Algorithm 2) to find the MCCN topology. When considering the fact that the number of channels is limited, the Algorithm 2 is further modified by adding a penalized term in the fitness function. The effectiveness of these algorithms is all proved in theoretical. Three examples are further tested to illustrate the methods developed in this paper.