SAR幅度图像统计模型及其参数估计

对适用于复杂场景SAR幅度图像的乘积模型统计特征进行了深入的分析,导出了其概率分布的一般形式,在单视情况下讨论了三种参数估计方法。MSTAR数据的统计分析结果表明该模型对于高分辨力的SAR图像有较好的适用性。     

一种面向星载计算机的功能级功耗估计方法

在星载计算机的软硬件协同设计过程中需要解决处理器功耗估计问题.现有的工具和方法主要面向ARM或DSP处理器,缺乏可用于LEON3处理器的软件功耗估计方法.针对这一不足,基于功能级功耗分析方法进行功耗估计,重点解决LEON3处理器的功耗建模问题.提出了从C代码中提取模型参数的方法,并且对序贯最小优化支持向量回归算法进行了改进,提高模型的精度.在数值试验部分,通过常用的C语言算法试验对估计方法进行了验证.结果表明功耗估计误差小于3%,能够满足星载计算机软硬件协同设计的需要.     

Dual Drive Curve Tool Path Planning Method for 5-axis NC Machining of Sculptured Surfaces

The problem of finished surface being not first-order continuous commonly exists in machining sculptured surfaces with a torus cutter and some other types of cutters. To solve this problem, a dual drive curve tool path planning method is proposed in this article. First, the maximum machining strip width of a whole tool path can be obtained through optimizing each tool position with multi-point machining (MPM) method. Second, two drive curves are then determined according to the obtained maximum machining strip width. Finally, the tool is positioned once more along the dual drive curve under the condition of tool path smoothness. A computer simulation and cutting experiments are carried out to testify the performance of the new method. The machined surface is measured with a coordinate measuring machine (CMM) to examine the machining quality. The results obtained show that this method can effectively eliminate sharp scallops between adjacent tool paths, keep tool paths smooth, and improve the surface machining quality as well as machining efficiency.     

Mission-driven autonomous perception and fusion based on UAV swarm

Distributed autonomous situational awareness is one of the most important foundation for Unmanned Aerial Vehicle (UAV) swarm to implement various missions. Considering the application environment being usually characterized by strong confrontation, high dynamics, and deep uncertainty, the distributed situational awareness system based on UAV swarm needs to be driven by the mission requirements, while each node in the network can autonomously avoid collisions and perform detection mission through limited resource sharing as well as complementarity of respective advantages. By efficiently solving the problems of self-avoidance, autonomous flocking and splitting, joint estimation and control, etc., perception data from multi-platform multi-source should be extracted and fused reasonably, to generate refined, tailored target information and provide reliable support for decision-making.     

接头螺纹咬死失效原因分析

管路接头在拆除时发生螺纹失效,本文对失效螺纹结构件形貌观察与测量,并对其材质进行硬度检验、金相分析。结果表明,管路接头螺纹发生了咬死,属损坏程度最严重的一类黏着磨损。依据黏着磨损发生的机理,结合螺纹连接结构的装配原理,最终确定选用同一种材料作为摩擦副是导致接头螺纹发生黏着磨损的内因;柱塞接头与螺纹接头间隙过小,导致安装过程中接头螺纹的螺纹齿形受损,产生多余物堆积,造成外套螺母向一侧偏斜是造成此次螺纹副发生咬死的主要原因。     

GNSS global real-time augmentation positioning: Real-time precise satellite clock estimation,prototype system construction and performance analysis

Lots of ambiguities in un-differenced (UD) model lead to lower calculation efficiency, which isn’t appropriate for the high-frequency real-time GNSS clock estimation, like 1 Hz. Mixed differenced model fusing UD pseudo-range and epoch-differenced (ED) phase observations has been introduced into real-time clock estimation. In this contribution, we extend the mixed differenced model for realizing multi-GNSS real-time clock high-frequency updating and a rigorous comparison and analysis on same conditions are performed to achieve the best real-time clock estimation performance taking the efficiency, accuracy, consistency and reliability into consideration. Based on the multi-GNSS real-time data streams provided by multi-GNSS Experiment (MGEX) and Wuhan University, GPS + BeiDou + Galileo global real-time augmentation positioning prototype system is designed and constructed, including real-time precise orbit determination, real-time precise clock estimation, real-time Precise Point Positioning (RT-PPP) and real-time Standard Point Positioning (RT-SPP). The statistical analysis of the 6 h-predicted real-time orbits shows that the root mean square (RMS) in radial direction is about 1–5 cm for GPS, Beidou MEO and Galileo satellites and about 10 cm for Beidou GEO and IGSO satellites. Using the mixed differenced estimation model, the prototype system can realize high-efficient real-time satellite absolute clock estimation with no constant clock-bias and can be used for high-frequency augmentation message updating (such as 1 Hz). The real-time augmentation message signal-in-space ranging error (SISRE), a comprehensive accuracy of orbit and clock and effecting the users’ actual positioning performance, is introduced to evaluate and analyze the performance of GPS + BeiDou + Galileo global real-time augmentation positioning system. The statistical analysis of real-time augmentation message SISRE is about 4–7 cm for GPS, whlile 10 cm for Beidou IGSO/MEO, Galileo and about 30 cm for BeiDou GEO satellites. The real-time positioning results prove that the GPS + BeiDou + Galileo RT-PPP comparing to GPS-only can effectively accelerate convergence time by about 60%, improve the positioning accuracy by about 30% and obtain averaged RMS 4 cm in horizontal and 6 cm in vertical; additionally RT-SPP accuracy in the prototype system can realize positioning accuracy with about averaged RMS 1 m in horizontal and 1.5–2 m in vertical, which are improved by 60% and 70% to SPP based on broadcast ephemeris, respectively.     

基于最小熵准则的频偏估计算法研究

提出了一种基于SEM(Spectrum Entropy Minimization,频谱熵最小化)的频偏估计算法。研究发现,频偏越小,离散信号频谱的熵越小。根据这一性质建立了相关算法,通过一维搜索的方式得到使相位补偿后信号频谱熵最小的频偏估计。仿真结果表明:SEM算法的估计性能能够达到CR(Cramer-Rao,克拉美罗)下界,而且估计的稳定性和鲁棒性较好,具有一定的应用价值。     

基于声波传播时间估计的气流速度测量方法

 为实现对亚声速和超声速气流速度的统一测量,提出了一种基于声传感器的新型测量方法。首先,根据声波在亚声速和超声速气流中的传播特性,利用特定的测量装置建立了声波传播时间与气流速度之间的数学模型,从而将气流速度的测量问题转化为声波传播时间的测量问题。然后,在此基础上,利用计时法和最大似然估计(MLE)方法来估计声波传播时间;其中,计时法在实时性上优势明显,而MLE方法则在可靠性上优于前者。最后,分别从阵元位置扰动性、计时误差和克拉美-罗界(CRB)3个方面对所提算法的性能进行了分析与仿真验证。结果表明,该算法能够实现对亚声速和超声速气流速度的精确测量。     

环面工具加工叶根过渡曲面的刀位可行域

利用环面工具加工过渡曲面时经常发生整体干涉,主要原因是缺乏对复杂环面工具加工复杂曲面时刀位可行域的研究。虽然采用常规的优化方法在大范围内对可行刀位进行搜索是可行的,但是需要耗费大量时间。为了避免刀具与过渡曲面的干涉并同时提高加工效率,研究了一种更加符合此区域结构特点的刀位优化算法,使得叶根过渡曲面得以无干涉地整体宽行加工。通过对典型叶根过渡曲面的可行刀位进行研究,发现其可行域形状为盾形,且行宽最大的刀位位于该盾形区域的两个底部边界上,有时位于该边界的端点上。根据该原理提出一种最优刀位搜索方法——沿着盾形区域底部边界搜索,应用最优化的刀位可行域以获得高的加工效率。以某航空发动机叶片的叶根过渡曲面为例进行了刀位优化计算、仿真和加工实验,验证了该方法在叶根过渡曲面加工中的有效性。     

Multi-view space object recognition and pose estimation based on kernel regression

The application of high-performance imaging sensors in space-based space surveillance systems makes it possible to recognize space objects and estimate their poses using vision-based methods. In this paper, we proposed a kernel regression-based method for joint multi-view space object recognition and pose estimation. We built a new simulated satellite image dataset named BUAA-SID 1.5 to test our method using different image representations. We evaluated our method for recognition-only tasks, pose estimation-only tasks, and joint recognition and pose estimation tasks. Experimental results show that our method outperforms the state-of-the-arts in space object recognition, and can recognize space objects and estimate their poses effectively and robustly against noise and lighting conditions.