一种TASIMM-UKF导弹状态估计方法

为了提高对机动导弹状态估计的精度和速度,提出了一种三轴分离IMM-UKF(TASIMM-UKF)滤波算法。将导弹运动状态按坐标轴方向进行三轴分离,并基于CV,CA和CJ模型集,采用无迹卡尔曼滤波器并行估计导弹三轴状态信息,有效地解决了导弹不同运动轴间的模型竞争问题。仿真结果表明,该方法能有效提高状态估计精度,缩短了估计时间,对复杂大机动目标状态估计具有良好的性能。     

An improved approach for rainfall estimation over Indian summer monsoon region using Kalpana-1 data

In this paper, an improved Kalpana-1 infrared (IR) based rainfall estimation algorithm, specific to Indian summer monsoon region is presented. This algorithm comprises of two parts: (i) development of Kalpana-1 IR based rainfall estimation algorithm with improvement for orographic warm rain underestimation generally suffered by IR based rainfall estimation methods and (ii) cooling index to take care of the growth and decay of clouds and thereby improving the precipitation estimation.     

数控机床及工装的发展与创新设计

在现代数控加工中,由于被加工件的精度要求以及复杂度不断提高,传统加工系统无法满足使用需求,为解决这一问题,数字控制系统的核心算法以及驱动系统得到了快速发展,一些创新机构也应用到了数控机床的整机结构设计中.这些解决措施大幅提升了被加工件的精度和表面质量,促进了市场上一系列新型数控机床的出现,如复合机床、镜像铣削机床等,与之配合的新型加工工装技术也取得了相应的突破.     

A fast pulse phase estimation method for X-ray pulsar signals based on epoch folding

X-ray pulsar-based navigation (XPNAV) is an attractive method for autonomous deep-space navigation in the future. The pulse phase estimation is a key task in XPNAV and its accuracy directly determines the navigation accuracy. State-of-the-art pulse phase estimation techniques either suffer from poor estimation accuracy, or involve the maximization of generally non-convex object function, thus resulting in a large computational cost. In this paper, a fast pulse phase estimation method based on epoch folding is presented. The statistical properties of the observed profile obtained through epoch folding are developed. Based on this, we recognize the joint prob-ability distribution of the observed profile as the likelihood function and utilize a fast Fourier transform-based procedure to estimate the pulse phase. Computational complexity of the proposed estimator is analyzed as well. Experimental results show that the proposed estimator significantly outperforms the currently used cross-correlation (CC) and nonlinear least squares (NLS) estima-tors, while significantly reduces the computational complexity compared with NLS and maximum likelihood (ML) estimators.     

基于液体静压导轨的大行程快刀伺服系统设计

采用了理论设计和有限元仿真分析相结合的方法,设计了基于液体静压导轨的大行程快刀伺服系统(最大加工行程30mm,行程4mm时频响不低于50Hz).首先,设计得到了基于液体静压导轨的大行程快刀伺服系统的结构模型和相关参数;接着,利用ANSYS/FLUENT软件对液体静压导轨的变形、模态以及油膜压力分布进行仿真分析,并且将油膜刚度的理论计算值和仿真计算值进行比较,验证了导轨设计的可靠性;最后,选用能够满足要求的音圈电机、位置反馈装置以及功能强大的MPAC运动控制器等完成了控制系统的搭建.     

基于卫星和星敏感器的冗余激光惯组在轨标定

采用高精度卫星导航速度、位置信息以及星敏感器提供的姿态信息设计十表冗余捷联惯组的标定模型,包含陀螺和加速度计的零次项和标度因数,对卫星和星敏感器辅助的冗余激光陀螺捷联惯组进行实时在轨标定.利用标准Kalman滤波和Sage-Husa自适应滤波作为估计算法,对十表冗余捷联惯组参数进行在线估计.数值仿真结果表明:参数标定精度均在7％以内,是一种实时的在轨标定方法,满足误差补偿要求.冗余惯组在轨标定方法为航天器高精度定姿和定轨提供了一种理论参考.     

基于雷达航迹的航空器质量估算

为保障基于轨迹运行的顺利实施,必须提高四维航迹预测的精度,而四维航迹的精准预测依赖于航空器质量准确估算。鉴于此,构建并分析了航空器能量模型;基于雷达航迹与航空器基础资料( BADA),提出了新型的航空器质量估算方法与步骤;利用最小二乘算法求解了航空器质量的估计值;分别基于预测航迹、雷达轨迹与QAR数据,采用相对误差作为评价指标,实施验证与分析。验证结果表明,提出的方法可将航空器质量估算误差控制在5%以内,从而能够有效地提高航迹预测精度。     

智能数控机床及其技术体系框架

首先简要介绍了数控机床的发展趋势,其次结合当前学术界及工业界的实践,对智能机床的概念进行了定义,然后提出了智能机床的技术体系框架,并详细阐述了智能数控系统、智能元器件以及智能化应用技术等智能机床中的关键技术.     

Simultaneous state and actuator fault estimation for satellite attitude control systems

In this paper, a new nonlinear augmented observer is proposed and applied to satellite attitude control systems. The observer can estimate system state and actuator fault simultaneously. It can enhance the performances of rapidly-varying faults estimation. Only original system matrices are adopted in the parameter design. The considered faults can be unbounded, and the proposed augmented observer can estimate a large class of faults. Systems without disturbances and the fault whose finite times derivatives are zero piecewise are initially considered, followed by a discussion of a general situation where the system is subject to disturbances and the finite times derivatives of the faults are not null but bounded. For the considered nonlinear system, convergence conditions of the observer are provided and the stability analysis is performed using Lyapunov direct method. Then a feasible algorithm is explored to compute the observer parameters using linear matrix inequalities (LMIs). Finally, the effectiveness of the proposed approach is illustrated by considering an example of a closed-loop satellite attitude control system. The simulation results show satisfactory perfor-mance in estimating states and actuator faults. It also shows that multiple faults can be estimated successfully.     

基于压缩量偏差约束的整体叶盘砂布轮数控抛光路径规划

数控抛光是实现整体叶盘叶片表面光整加工自动化、高效化的关键技术,而抛光路径规划对表面质量有着显著的影响。在抛光曲面时,砂布轮沿接触曲线上的径向压缩量偏差导致材料去除量一致性较差。针对该问题,提出一种基于压缩量偏差约束的路径规划方法。通过对砂布轮受曲面挤压变形几何分析,建立了自由曲面抛光接触线上砂布轮压缩变形量分布模型。在给定刀触点处,以接触曲线上最大压缩量偏差最小化为评价指标构建了刀轴矢量优化模型,并利用改进的粒子群优化（PSO）算法进行求解。基于最优刀轴矢量,完成自由曲面上等参数相邻刀触轨迹曲线的计算。最后,通过数据对比和试验,验证了所提方法的正确性和有效性。结果表明,抛光区域的轮廓度、粗糙度均得到明显的改善。