基于立体视觉的板料成形极限应变测量关键技术及其系统

 设计并实现了一种基于双目立体视觉和数字图像相关方法的板料成形极限应变测量系统—BOSAS(双目视觉应变测量分析系统),对其中的关键技术作了深入讨论。该系统可以克服传统坐标网格方法很难进行变形过程的动态监控、自动化程度不高等局限,并可计算试件各变形阶段全场应变分布,以及重建不同变形时刻下试件的几何外形。将分段位移传递法和有限应变理论相结合,可计算大变形下的极限应变。对深冲铝板6016以及航空铝板2A12-T4、2A12-O、7B04-O等材料的应变测量结果显示本文方法适用于板料成形三维变形及极限应变的测量,并将测得数据与由坐标网格方法测得的数据进行比较,结果表明本文方法测量准确、可靠。     

On the effect of considering more realistic particle shape and mass parameters in MMOD risk assessments

One of the primary mission risks tracked in the development of all spacecraft is that due to micro-meteoroids and orbital debris (MMOD). Both types of particles, especially those larger than 0.1 mm in diameter, contain sufficient kinetic energy due to their combined mass and velocities to cause serious damage to crew members and spacecraft. The process used to assess MMOD risk consists of three elements: environment, damage prediction, and damage tolerance. Orbital debris risk assessments for the Orion vehicle, as well as the Shuttle, Space Station and other satellites use ballistic limit equations (BLEs) that have been developed using high speed impact test data and results from numerical simulations that have used spherical projectiles. However, spheres are not expected to be a common shape for orbital debris; rather, orbital debris fragments might be better represented by other regular or irregular solids. In this paper we examine the general construction of NASA’s current orbital debris (OD) model, explore the potential variations in orbital debris mass and shape that are possible when using particle characteristic length to define particle size (instead of assuming spherical particles), and, considering specifically the Orion vehicle, perform an orbital debris risk sensitivity study taking into account variations in particle mass and shape as noted above. While the results of the work performed for this study are preliminary, they do show that continuing to use aluminum spheres in spacecraft risk assessments could result in an over-design of its MMOD protection systems. In such a case, the spacecraft could be heavier than needed, could cost more than needed, and could cost more to put into orbit than needed. The results obtained in this study also show the need to incorporate effects of mass and shape in mission risk assessment prior to first flight of any spacecraft as well as the need to continue to develop/refine BLEs so that they more accurately reflect the shape and material density variations inherent to the actual debris environment.     

超椭球凸集合可靠性综合指标定义及求解方法

针对失效域与超椭球凸集合发生干涉与不发生干涉两种情况下,超椭球凸集合非概率可靠性与非概率可靠度两种指标各自存在的不足,将两指标相结合提出多个超椭球凸集合描述时的可靠性综合指标定义,并提出将改进的有限步长迭代法(MLSA)与Monte-Carlo法结合来求解综合指标的方法.MLSA是在有限步长迭代法的基础上提出的,根据增...     

飞控系统极限环抑制对

舵机是电传飞控系统中非线性因素的重要组成部分,若参数选择不当,常会发生稳态不衰减的小幅值极限环振荡现象。应用非线性控制理论,将飞控系统稳定性要求转化为对舵机的幅频特性、相频特性和不灵敏区范围要求,从而通过舵机设计达到抑制极限环的目的。仿真结果表明,该方法简单、实用,具有较高的工程应用价值。     

非相似余度飞控计算机

从容错的角度介绍了Boeing777和A320的数字飞行控制计算机系统。Boeing777和A320的飞控计算机都采用了非相似的余度技术,能容忍软件和硬件的共态故障,但在每个计算机的功能分配和整个飞控计算机系统的余度结构编排等方面体现了各自的特点。用广义随机Petri网描述了Boeing777余度结构和容错动态过程,并进行了系统的可靠性计算和容错度分析。针对中国"大型飞机"容错飞控系统的设计作了分析和建议。     

MJ螺纹在飞机上的应用探讨

详细介绍了MJ螺纹与M螺纹的区别,总结了使用MJ螺纹的益处,探讨了在实际装配中,MJ螺纹与M螺纹配合使用的可行性问题,给出了解决MJ外螺纹与M内螺纹能否配合问题的判定公式。     

具有SDRAM容错和检错功能的PowerPC 高性能处理单元设计

介绍一款PowerPC架构的高性能嵌入式处理单元设计.利用PowerPC体系结构内建的差错检测和报告机制,采用CPLD设计和实现了三模冗余(TMR)SDRAM存储器模块,不但提供高速存储器的容错能力,还具有差错检测能力,提高了处理单元的可靠性.介绍一个分布式容错计算机的实例,并分析了该方案的优点.     

疲劳多裂纹扩展随机模型

建立了含相互干扰多裂纹结构的裂纹扩展随机模型.提出了远源裂纹、近源裂纹、概率寿命曲面等概念.给出了相互干扰多裂纹扩展随机微分方程的统一表达形式.在工程基本假设的基础上简化了相互干扰多裂纹扩展过程的计算.在此基础上可进一步分析含相互干扰多裂纹结构的可靠性,可直接应用于工程实践.     

一个二次可积系统在二次保守扰动下的分支

研究了一个具有同宿轨的二次可积系统在二次保守扰动下的分支现象.此时一阶Melnikov函数恒等于零,必须考虑二阶Melnikov函数,而在一阶Melnikov函数中不起作用的扰动参数在二阶Melnikov函数中却起着非常重要的作用,因此扰动部分极为复杂.在此借助于二阶Melnikov函数的计算公式及理论分析,建立了极限环分支定理,得到了在一阶Melnikov函数恒等于零,而二阶Melnikov函数不恒等于零时,可能分支出的极限环个数最大为2的结论.     

动态故障树分析方法在软、硬件容错计算机系统中的应用

结合几个动态逻辑门及其向Markov状态转移链的转化,介绍了一种新的动态故障树建模分析方法,用来解决不可修系统中对动态时序特性的建模困难问题。并给出了一个具体的例子,应用这种方法对其进行分析。分析结果表明,软、硬件容错技术在计算机系统中的应用,可以显著提高系统的可靠性。