设计性基础素描思维方式与工业设计创新

本文从基础素描的设计性思维导入入手，分析了设计性思维活动在基础素描中的应用原理及设计性基础素描思维方式对工业设计创新的影响和作用。     

Emergence of a Habitable Planet

We address the first several hundred million years of Earth’s history. The Moon-forming impact left Earth enveloped in a hot silicate atmosphere that cooled and condensed over ∼1,000 yrs. As it cooled the Earth degassed its volatiles into the atmosphere. It took another ∼2 Myrs for the magma ocean to freeze at the surface. The cooling rate was determined by atmospheric thermal blanketing. Tidal heating by the new Moon was a major energy source to the magma ocean. After the mantle solidified geothermal heat became climatologically insignificant, which allowed the steam atmosphere to condense, and left behind a ∼100 bar, ∼500 K CO₂ atmosphere. Thereafter cooling was governed by how quickly CO₂ was removed from the atmosphere. If subduction were efficient this could have taken as little as 10 million years. In this case the faint young Sun suggests that a lifeless Earth should have been cold and its oceans white with ice. But if carbonate subduction were inefficient the CO₂ would have mostly stayed in the atmosphere, which would have kept the surface near ∼500 K for many tens of millions of years. Hydrous minerals are harder to subduct than carbonates and there is a good chance that the Hadean mantle was dry. Hadean heat flow was locally high enough to ensure that any ice cover would have been thin (<5 m) in places. Moreover hundreds or thousands of asteroid impacts would have been big enough to melt the ice triggering brief impact summers. We suggest that plate tectonics as it works now was inadequate to handle typical Hadean heat flows of 0.2–0.5 W/m². In its place we hypothesize a convecting mantle capped by a ∼100 km deep basaltic mush that was relatively permeable to heat flow. Recycling and distillation of hydrous basalts produced granitic rocks very early, which is consistent with preserved >4 Ga detrital zircons. If carbonates in oceanic crust subducted as quickly as they formed, Earth could have been habitable as early as 10–20 Myrs after the Moon-forming impact.     

直升机主桨毂疲劳试验技术研究

直升机旋翼系统主桨毂是直升机关键部件，在地面运转及首飞前必须进行疲劳试验，根据试验结果确定初步疲劳寿命。本文以某型号直升机旋翼系统主桨毂疲劳试验为例，总结出多点协调加载试验台的设计方法及试验调试方法，并按照试验台的组成，从控制系统、泵站、伺服动作器、测量系统及试验台体等方面，详细阐述了设计内容及其工程效果。     

构建我国"绿色"税收体系的设想

通过阐述“绿色”税收体系的理论基础是外部性理论，分析了我国工业化进程中的环境现状，环境污染造成的危害，同时借鉴西方国家开征“绿色”税制的成功经验，提出了费改税、完善税种、开征新税、完善相关政策等构建我国“绿色”税收体系的初步设想。     

扩展的基于角色的访问控制模型

提出了一种扩展的基于角色的访问控制RBAC(Role Based Access Control)模型--RTBAC (Role & Task Based Access Control)模型.该模型在RBAC96模型之上引入了任务和任务实例的概念,形式化地定义了任务和任务实例的层次结构,界定了传统会话同任务实例之间的关系以及任务实例同权限之间的关系,并且提供了几种辅助函数.该模型可以更为自然地描述业务流程和访问控制策略,更适合分布式协作应用,特别是工作流和组合服务.基于该模型定义了一种新的动态职责分离约束--基于任务的动态职责分离约束,并且同传统动态职责分离约束进行了比较.该约束可以更准确地刻画访问控制相关的系统运行时上下文的范围,从而提高运行时访问控制的效率.     

Acceleration of interplanetary pick-up ions and anomalous cosmic rays

It may not be doubted anymore that anomalous cosmic rays (ACRs) are produced in the heliosphere from interplanetary pick-up ions through their acceleration at the solar wind termination shock. However, there is no general agreement in the community of heliospheric researchers concerning the mechanism of injection of the pick-up ions into the shock acceleration. We discuss here three possible ways for pick-up ions to be involved into the acceleration process at the termination shock: (1) preacceleration of pick-up ions in the whole region from the Sun up to the termination shock by solar wind turbulences and interplanetary shock waves, (2) local preacceleration of pick-up ions in a vicinity of the termination shock by shock surfing, and (3) formation of high-velocity tails in pick-up ion spectra consisting of secondary pick-up ions which are produced in the supersonic solar wind due to ionization of energetic neutral atoms entering from the inner heliosheath.     

碱性体系锌—镍合金电沉积的研究

本文介绍了一种新型的碱性体系锌-镍合金电镀工艺。本工艺镀层光亮、镀液稳定、组成简单及维护方便,能在很宽的工艺范围下能镀出含镍量为11～15％的锌-镍合金。镀层具有高耐蚀性及低氢脆性。对电沉积机理也作了必要叙述。     

多级最优控制问题的提法与求解变分法的应用

本文讨论多级最优控制问题,给出该问题的数学提法以及变分法求解原理。特别,详细研究了级间分离时刻的连接条件。本文的工作为解决多级最优控制问题提供了途径。     

碳纤维增强树脂基层板应变率相关损伤数值研究

为了研究高应变率载荷对于碳纤维增强树脂基复合材料变形破坏行为的影响,通过应变率修正式对复合材料的刚度与强度进行修正,建立了可考虑应变率效应的复合材料损伤数值模型,采用该模型对不同应变率条件下层板结构的面内破坏行为进行了模拟并与文献实验进行了对比分析。计算结果表明:本文所构建的数值模型可以有效预测树脂基层板结构在不同应变率条件下的破坏特征,并在材料刚度与强度硬化现象的预测方面有着较高精度;对于0°、90°铺层主导的试件,由于其力学性能近似为线性,数值模型在强度预测方面获得了较高精度;而对于±45°铺层主导试件,其在不同应变率条件下表现出较强的非线性损伤特性,因此模型在其强度性能预测方面存在一定误差。     

考虑低能电子影响的二次电子修正模型

随着微放电效应研究的不断深入,低能电子影响在微放电过程中越来越不可忽视。当前常用的微放电模型在处理低能电子问题上具有一定的局限性,为了精确模拟这一过程,在深入研究二次电子和背散射电子发射理论的基础上,分别针对材料表面条件不同引起的二次电子发射系数不确定性、低能电子的背散射系数以及电子入射角等问题进行了分析和讨论,并在此基础上建立了一个二次电子发射模型,最后通过数值计算讨论了模型的正确性和适用范围。这一模型同时考虑材料表面条件参数、低能电子的背散射系数以及入射角等因素影响,能够兼容较低能量电子的二次发射,提升微放电数值模拟的精确度和适用性,为微放电数值模拟的发展起到推进作用。