Godunov型显式大时间步长格式研究进展

综述了Godunov型显式大时间步长格式的研究进展。首先介绍了显式大时间步长格式的概念、分类和优势。然后重点阐述了Godunov型显式大时间步长格式的构造方法、高阶精度推广方法、多维问题推广方法和收敛特性、分辨率及计算效率等性能，展示了其在典型问题中的应用和验证。最后给出了Godunov型显式大时间步长格式研究进一步可能的发展方向。     

变稳直升机设计与应用技术

变稳直升机在直升机研制过程中发挥着至关重要的作用。通过回顾美国、加拿大、德国等航空强国各个阶段典型变稳直升机研制历程,系统性梳理了变稳直升机研制中所涉及的几项关键技术,如变稳能力分析、变稳安全策略、变稳控制方法以及可变人感系统等。在此基础上,参照国外研制经验提出了上述技术的设计原则和相关要求。同时,对变稳直升机在飞行品质标准研究、新技术演示验证及飞行员培训等方面的应用进行了简要分析。     

A finite-time 3D guidance law based on fixed-time convergence disturbance observer

In order to achieve accurate interception of high-speed maneuvering targets, this paper presents a relative Line-of-Sight (LOS) velocity based finite-time three-dimensional guidance law design framework, and discusses the application of fixed-time convergence disturbance observer in this framework. Firstly, a simple Lyapunov function is provided to show that the coupled terms in the relative kinematics can be ignored in the proposed guidance law design framework. Secondly, the realizations of several classical guidance laws are analyzed with the proposed framework, including TPN guidance law, finite-time Input-to-State Stability (ISS) guidance law, and sliding mode guidance law. Thirdly, fixed-time convergence disturbance observers are introduced to design the composite finite-time 3D guidance law, and Lyapunov method is employed to show the stability of the guidance system. Numerical simulations with different scenarios show that the proposed generalized guidance law performs high interception accuracy.     

锂离子电池用PMMA凝胶/LLZT复合电解质的原位制备

固态电池具有高能量密度和高安全性等潜力,是未来航天器电源的重要解决方案。本文利用原位聚合方法,制备了聚甲基丙烯酸甲酯(PMMA)凝胶/Li_(6.5)La_3Zr_(1.5)Ta_(0.5)O_(12)(LLZT)复合电解质。通过选择与陶瓷相润湿性好的甲基丙烯酸甲酯单体(MMA)进行原位聚合,改善了电解质内部陶瓷与凝胶的两相界面。室温下,此复合电解质具有6.6×10~(-4)S·cm~(-1)的离子导电率。进一步采用原位聚合法,制备了Li/复合电解质/Li对称电池。与非原位方法相比,原位聚合将电解质与金属锂的界面比电阻从1 572Ω·cm~2降至367Ω·cm~2,对称电池在0.085 mA·cm~(-2)下能够稳定循环400圈,显示出良好的循环稳定性。     

The yaw stability analysis for stratospheric airships in float situation

When a stratospheric airship free floats at pressure altitude, the sideslip angle of the airship is neither random nor against the wind, but is stable on certain values. According to classical potential flow theory, a simplified two-dimensional ellipse and three-dimensional ellipsoid are firstly analyzed respectively, which implied that the airship could present crosswind orientation. The numerical investigations (CFD) on the yaw stability based on a bare hull and a finned airship are employed for verifying the theory conclusion. It is found that the finned airships can remain stable when its sideslip Angle is 55–70°, which is less than 90° of the stable angle of the ellipsoid and bare hull, but statically unstable at low sideslip angles, its static instability is similar to that of dynamic flight. Then the fight data of three stratospheric airships is analyzed. The yaw stability in flight data generally agrees with expectations drawn of theoretical and numerical simulation. These investigations serve to provide references for yaw control and configuration design of airships.     

高超声速巡航飞行器在线自适应反馈控制设计

由于飞行器模型的强非线性,各种建模不确定性以及飞行环境的复杂性,高超声速飞行器控制成为一个研究难点.针对某类具有参数不确定性的非线性系统,提出了一种反馈线性化与自适应估计相结合的方法,对非线性系统的输入输出动态应用反馈线性化处理以得到拟线性模型,并设计反馈控制律;对不确定参数采用自适应在线估计,利用Lyapunov方法分析稳定性;针对选择不同输出的情况,对如何消除内动态进行了讨论.为了验证该方法的可行性,将其应用于某高超声速飞行器巡航段纵向非线性模型,对速度和高度通道进行跟踪控制仿真,由于飞行器和大气环境存在建模不确定性,利用自适应控制对不确定参数进行在线估计.仿真结果显示该方法能够快速收敛,并且具有良好的在线自适应能力.     

一种基于2DOFH∞控制器的航天器姿态控制方法

研究某航天器俯仰轴姿态的二自由度鲁棒控制问题．首先分析俯仰轴系统中存在的主要不确定性,建立系统的结构与非结构不确定模型;然后将二自由度鲁棒控制方法应用于俯仰轴系统中设计H∞控制器,由于得到的H∞控制器阶次过高,对其进行降阶处理;最后进行仿真验证．结果表明该控制器对干扰力矩和参数不确定性的影响具有良好的鲁棒稳定性．     

侧向随动力作用下大展弦比柔性机翼的稳定性

 随动力能够诱发弹性结构发生颤振失稳。以侧向随动力和集中质量分别模拟发动机推力和外挂质量,考虑机翼垂直弯曲-扭转刚度比、集中质量大小、侧向随动力和集中质量的位置以及机翼后掠角和上反角的影响,研究了受侧向随动力作用的大展弦比柔性机翼的气动弹性稳定性。数值模拟所采用的大展弦比柔性机翼非线性气动弹性模型耦合了几何精确完全本征运动梁模型和ONERA动失速非定常气动力模型,该模型考虑了几何非线性、动失速和材料各向异性。模拟结果表明,侧向随动力对机翼颤振可以具有稳定作用,其具体表现依赖于若干变参数的影响,如：减小机翼垂直弯曲-扭转刚度比;发动机吊舱靠近翼根布置;使发动机推力作用点在法向上与机翼弹性轴靠近;单纯的集中质量避免布置在柔性机翼中部,且布置在机翼弹性轴之前或下方,这些设计或布置均有利于提高带发动机吊舱/有效载荷外挂的柔性机翼的气动弹性稳定性。     

考虑复合材料蒙皮稳定性的飞机翼面结构布局优化设计

 复合材料蒙皮稳定性是飞机翼面结构设计需要考虑的重要方面。由于翼面结构稳定性理论分析的复杂性,工程中,通常采用与理论分析相比拟的简化方法、使用简便可靠的经验公式在设计过程中进行稳定性校核。多墙式结构是当前翼面结构中普遍采用的结构形式,墙的布局和蒙皮的厚度对复合材料蒙皮的临界屈曲载荷有着重要影响。因此,针对多墙式翼面结构,以工程经验公式为基础,以蒙皮单位长度上的的重量为优化目标,以墙的布局参数和蒙皮厚度为设计变量,以临界失稳载荷为约束,建立了一种考虑复合材料蒙皮稳定性的翼面结构布局优化问题的数学模型,导出了目标函数敏度计算的解析式,并提出了优化问题的求解方法。以翼盒结构为例,验证了该方法的有效性。     

Theoretical investigation on water/metal fuel ramjet motor-thermodynamic cycle and thermodynamic calculation

For achieving high-speed requirement of underwater vehicle,a conceptual engine,which utilizes the hydroreactive characteristic of several metals under supercavitation environment,has been put forward. Especially,in order to obtain specific impulse as great as possible,a dual water injection system is taken into account. Then thermodynamic cycle model,which lead the improvement of power plant and energy system,is introduced in detail,and thermal efficiency is also analyzed. Furthermore,for investigating the performance of this kind of engine system,detailed thermodynamic calculation and analysis are achieved. Especially,regarding hydroreactive metal fuel Mg/AP/HTPB as our target fuel-rich propellant,considering its obvious deficient oxygen property and the energy property of magnesium/water reaction,theoretical calculation method is established by integrating chemical non-equilibrium with chemical equilibrium. Accordingly,low limit of primary water/fuel ratio is determined. In addition,the qualitative and quantitative relationship of performance parameters,such as theoretical specific impulse,nozzle exit temperature,characteristic velocity,etc.,versus water/fuel ratio is investigated respectively.